Find Verified Scaffolding Tube Suppliers, Manufacturers and Wholesalers

Scaffolding Tube
Standard: BS1139
Material: Q235/ Q345
Surface Treatment: Hot Dip Galvanized
MOQ: 5 Tons
Place of Origin: Tianjin, China
Shipping Port: Tianjin Port
Delivert Time: Within 20-30 days after receiving the LC or Deposit
Sample: Availbale, Sample for Free

Scaffolding Tube
Use: Scaffolding is a temporary structure used to support people and material in the construction or repair of buildings and other large structures. Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse, Stands Towers, Agricultural Equipment
Standard: BS 1139, BS1387-1985, EN 39, EN10219, JIS G 3444
Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, STK400, STK500
Outer Diameter: 27mm, 38mm, 42mm, 48.3mm-48.6mm,50.8mm,60.3mm,63.5mm,76mm,etc...
Wall Thickness: 2.0mm - 4.0mm
Length: 5.8m ,6m, 6.4m,6.5m , 0.3-18m
End: Square cut, Burr removed
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black
Packing: Plastic plugs in both ends, Wrapped in waterproof paper or PVC sleeve, and sackcloth with several steel strips
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.
Mill Test Certificate: EN 10204/3.1B
Coupler
Double Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.05 ? 1.48 KG
Swivel Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.25 ? 1.75 KG
Standard: BS1139, EN 74
BS 1139
BS 1139 Standard
Chemical Composition:
% by mass, Maximum
C
Si
P
Ni
S
0.20
0.30
0.050
0.009
0.050
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
235
340 - 480
24%

BS 1137
BS 1137 Standard
Chemical Composition:
% by mass, Maximum
C
Si
Mn
P
S
0.20
-
1.20
0.045
0.045
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
195
320-480
20%

Scaffolding Tube
Use: Scaffolding is a temporary structure used to support people and material in the construction or repair of buildings and other large structures. Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse, Stands Towers, Agricultural Equipment
Standard: BS 1139, BS1387-1985, EN 39, EN10219, JIS G 3444
Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, STK400, STK500
Outer Diameter: 27mm, 38mm, 42mm, 48.3mm-48.6mm,50.8mm,60.3mm,63.5mm,76mm,etc...
Wall Thickness: 2.0mm - 4.0mm
Length: 5.8m ,6m, 6.4m,6.5m , 0.3-18m
End: Square cut, Burr removed
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black
Packing: Plastic plugs in both ends, Wrapped in waterproof paper or PVC sleeve, and sackcloth with several steel strips
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.
Mill Test Certificate: EN 10204/3.1B

Standard:API, ASTM, BS, API 5CT, ASTM A53-2007, BS 1387
Grade:10#-45#, A53-A369, Q195-Q345, 10#, 20#, A53(A,B), Q195, Q235
Thickness:0.5 - 2.5 mm
Section Shape:Round
Outer Diameter:10 - 165 mm
Place of Origin:Tianjin, China (Mainland)
Secondary Or Not:Non-secondary
Application:Fluid Pipe
Technique:ERW
Certification:SGS,ISO
Surface Treatment:Galvanized
Special Pipe:Thick Wall Pipe
Alloy Or Not:Non-alloy
Name:galvanized pipe
Zinc Weight:40g,80g,100g,120g,270g,400g,500g
technique:ERW
Length:2-12m
End Treatment:Plain End
Brand:Ruijie

Our #scaffolding #steel tube production base. Provide #OneStopService, inculding #galvanized
Produce range:
OD: 42mm, 48.3mm, 48.6mm, 50.8mm, 60.3mm, 63.5mm, 76mm
Thickness: 2-4mm
Annual produce capacity: 150,000tons

We offer components for Scaffolding System at pocket friendly price. Products that we offer are made of optimum grade stainless steel material so that components can withstand pressure of people and material during constructing and repairing a building.

1.Item: English Style Forged Double Coupler/Clip for Tube Scaffold

2.size:48.3mm;

3.material :Q235;

4.standard : EN74,BS1139

5.ISO 9001:2000 is approved;

6.OEM service is available.

7.type:British Type Double Coupler



Item English Style Forged Double Coupler/Clip for Tube Scaffold
Item NO. SD-3001A

Material
Q235

Surface
Electroplate,Zinc Plate

Size
48.3*48.3mm
weight
1.00kg


Port

Qingdao


Payment

L/C,T/T We can contact in detail

Shipment FOB,CIF,EXW
Package knited bags + steel pallets or as required
DeliveryDetail 20-45days
Standard EN74,BS1139

Scaffolding pipe in hot dip galvanized and black
Outer diameter 48.3mm/60.3mm or others
Thickness 4mm, 3.2mm, 3.0mm or others
Lengther: 6m, 21'or others
Conform to bs 1387/en39 standard

61 pcs per bundle/ 37 pcs per bundle

We deals in the following Chemicals :-

Alumina Silica ( Cenosphere ) Powder
Fly Ash Powder
Ilmenite (Synthetic Rutile)
Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide )
Barite Powder, Barite Ore
Dolomite Powder
Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets
Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits
Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay
Calcium Carbonate Powder
Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells

Scaffolding that we sell here is the accessories. To Main frame, we do not currently supply. Scaffolding we offer are with JIS & BS1139 standard, which is the Japan International Standard JIS & BS = British Standard. Have in common with standard BS1139 EN74. Our Scaffolding Load Test is accompanied by a certificate which became one of the requirements for oil and gas products can be used in the project.

Packed in bundle, Suitable sea transport.

Drop forged scaffolding double coupler British type


Drop forged double coupler British type,which is widely used in global market to connect 48.3mm tubes at 90 degrees.
Unit weight: 0.97kg
Customized marks can be made
Surface finish: electro galvanized,or hot dip galvanized
Meeting EN74 and BS1139 Standard
Packing: 25pcs in one bag,50 bags are packed on one wood or steel pallet
Rich experience in producing all types of scaffolding couplers,pressed type and drop forged type.We have our own forging line
Fast delivery

04. Pressed double coupler (fixed clamp/fixed coupler), bs 1139 standard / en 74
05. Pressed swivel coupler (swivel clamp/swivel coupler) bs 1139 standard / en 74
06. Pressed putlog coupler, bs 1139 standard / en 74
07. Drop forged fixed girder coupler, bs 1139 standard / en 74
08. Drop forged swivel girder coupler, bs 1139 standard / en 74
09. Sleeve coupler, bs 1139 standard / en 74
10. Base plate, size 150 x 150 mm
11. Metal plank dengan ukuran panjang 2 sampai 4 meter, lebar 25 cm, tinggi 4 cm, tebal 1, 2 mm, ss 280 standard
12. Drop forged double coupler, bs 1139 standard / en 74
13. Drop forged swivel coupler, bs 1139 standard / en 74
14. Inner joint pin
15. Stair thread coupler
16. Putlog head
17. Oyster coupler
18. Board retaining coupler
19. Ladder clamp
20. Roofing coupler
21. Toe end clip
22. Supa tie coupler ii
23. Locking pin
24. Fencing coupler
25. C-clamp fixed coupler
26. C-clamp swivel couple



Steel pallets

"Arabian Spar is a leading company is various types of industrial scaffolding manufacture, services & access solutions including Scaffold Pipes, ERW GI & MS Tubes, Steel Board, Metal Board Ladder Beams, Cuplock Scaffolding, Scaffolding Metal Boards, OSHA Proof Tested Scaffolding in Jubail, Dammam, Riyadh Saudi Arabia

Right Angle Wedge Clamp
1.Made of high tensile strength steel bar Fusion Welding increased the strength Wedge lock is easy to use 2.Hot dip galvanized for long service life.
3.Connecting two tubes at right angles.
4.A coupler in which the clamping force on the tubes is provided by tightening the flaps aroundthe tube and by menans of hammering home a wedge.
5.We can carve any marks, if you need.

MS ERW Pipes as as per BS / EN / ASTM / DIN / BSI standards from 1/2" - 8" size in black and galvanised finish.

Euro packing

Product Description

1.Dimensions:48.3-48.3mm

2.Material:Q235 carbon steel

3.Nut:21mm,22mm,23mm

4.T-bolt:80mm,89mm

5.Weight :0.95-1.05kg or as per your request

6.Standard:EN74,BS1139,CE and also fit for our domestic standard, through SGS test.

7.Techs:Drop Forged

8.Surface treatment:Self-color,Zinc plated ,Hot dip galvanized

9.Color:Self-color(Black) , White, Yellow

10.Style:British(also can produce German, American, Japanese and so on)

11.Quality:good bearing capacity,durable & stable

12.Price:reasonable & wonderful

13.OEM service is available.

Tube od:1.62" high tensile steel;

Finishing: powder coated;

Frame size can be made per client't requirement.

Product Description:
High-quality scaffolding tubes made of Q235 or Q345 carbon steel, widely used in construction and infrastructure projects. Tubes are available in various lengths and wall thicknesses, with surface treatments such as hot-dip galvanized, painted, or pre-galvanized for rust protection and durability.

Material: Q235 / Q345

Outer Diameter: 48.3 mm

Wall Thickness: 2.0â??4.0 mm

Length: 6m or customized

Surface: HDG / Painted / Pre-galvanized

Standard: EN39 / BS1139