It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials.
Advantage:
1. Excellent low temperature resistance.
2. High tensile strength and elongation.
3. Excellent tear, corrosion and weather resistance.
4. Hot melt construction with reliable and durable seams.
Application:
Waterproof and moisture proof works for roof and underground space of various buildings.
1.Brand name jianda
Surface pe, s, m
Size 1mx10m, 1mx8m
Fetus: composite tires or polyester
With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface
Type 2: standard: gb/t23441-2009
Low tender degrees: - 20 or 25
Body: polyester tire
Thickness of 1.5 mm at least
Packed in rolls with pallet/ or as per clients' requirement
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane.
good self heating, easy application, and long service, etc.
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
Description:
SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule.
APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.
Specification:
Thickness: 3mm 4mm 5mm
Width: 1m
Length: 7.5m/10m or customized
Base: Polyester/Fiberglass Felt
Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
1185 Sbs Modified Bitumen Waterproofing Membrane Suppliers
Short on time? Let Sbs Modified Bitumen Waterproofing Membrane sellers contact you.
SBS modified bitumen waterproof membrane takes SBS
(styrene-butadiene- styrene) thermoplastic elastomer modified
asphalt mixed with additives as base materials, using premium
polyester (PY), fiberglass (G), fiberglass & polyethylene felt
(PYG) as matrix , and adopting sand (S), mineral granule
(M), polyethylene film (PE), aluminum foil etc as dip-coat, which is
produced by stirring and grinding with special equipment.
Features
A)Good low temperature flexibility,it has no crack when
temperature drops into -20â??;Excellent heat resistance,
it has no flow when temperature reaches 90â??
B)Great tensity,prolonged life span,easy to use
C)Suitable forâ? and â?¡grade constructional waterproofing
project,especially for cold area and the project of frequent
structural deformation
Size Available
â?¢Width-3.28ftï¼?1mï¼?
â?¢Length-24.6ft(7.5m)
32.8ft(10m)49.2ft(15m)
â?¢Thickness-
PY (3mm,4mm,5mm)
G (3mm,4mm)
APP modified bitumen waterproofing membrane based on
APP (atactic polypropylene) or APAO, APO (It is reported
that tiring polymer) modified asphalt roofing, high-quality
polyester felt, fiberglass mat base for the child, with fine
sand and mineral tablets (piece) material, PE film for
the cladding material, the use of advanced technology refined
plastomer modified bitumen membrane.
Features
A)Good elongation;Good anti-weathering;Excellent flexibility
B)Strong adhesion;High strength;Anti-abrasion and anti-impact
C)Superior High and low temperature resistance,especially for hot areas
D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew
ADVANTAGES
â?¢Over 1000 cases in waterproofing projects
â?¢Accredited contract observing enterprise
â?¢15 years of experience in waterproofing industry
â?¢Self-contained production line,sound and completed production management systems
â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels
â?¢3 years of innovation in production craftmanship and 10 proprietary products
Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs
of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including
waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Specification
thickness:2mm 3mm 4mm 5mm
width:1m
length:7.5m,10m,15m
Certificate
CE,ASTM standard, ISO
Pakaging
7.5sqm or 10sqm per roll plastic sack by rolls or pallet
The elastomeric SBS modified asphalt waterproof rolling material is made of styrene butadiene-styrene rubber modified asphalt as coating. It is made of glass fiber felt, polyester felt and glass fiber reinforced polyester felt as the tread material.
Features:
Strong impervious performance and good anti-aging ability
Acid and alkali resistant, with a service life of 30 years
Good endurance climate capability
Can be used in low temperature environments with long life
High tensile strength, high elongation, good dimensional stability
Product category:
1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY)
2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M)
3. According to membrane performace: I Grade and II Grade
Features:
1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking
of the infrastructure.
2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions
3. Good resistant to acid and alkali corrosion, weather resistance
4. Construction convenience, hot melt method and cold adhesion method.
Usage :
SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and
seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant,
landfill field, canals, water pool, swimming pool etc.
Name is sbs modified bitumen waterproof membrane.
Thickness is 3mm.
Reisitance temperature is -5 degree celsius.
Length is 10 meters.
Width is 1 meter.
This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, water pool, reservoir, dam, sewage treatment pool, garbage landfill field, etc., it is one of middle and top grade waterproof materials.
No. Itemclass nclass lclass w
1tensile strength, mpa5
Tensile force, n/cm 7070
2elongation at break, %200125125
3heat treating size changing rate, %_ 311
4flexibility at low temperature 20¦, crack-free
5permeability resistance (0.3mpa-2h) watertight
6puncture resistance water resistant
This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, tunnel, cave, water pool, reservoir, dam, toilet, bathroom, floor, sewage treatment pool, garbage landfill field, etc., mainly applies to the waterproof projects of buildings with higher requirements of waterproof grade.
No. Item product index
Jl2 type n
1tensile strength at break, mpa
Normal temperature .05.0
2 elongation at break, % 400250
3tearing strength, kn/m normal temperature 2420
4water tightness0.3mpa-30minregular
0.2mpa-30minregular
5 flexibility at low temperature, ¦ < -30-20
6hot air aging hold-up rate
(80¦-168h)tensile strength hold-up rate at break, % 80
Elongation hold-up rate at break, % 70
100 ·± tensile strength hold-up ratecrack -free
7heating elongation and shrinkage, mmelongation <22
Shrinkage <44
8alkaline resistance [10%ca(oh)2 normal temperature -168h]tensile strength hold-up rate at break, % 80
Elongation hold-up rate at break, % 80
Polyethylene polypropylene polymer composite waterproofing membrane is a polymer composite coil (sheet) which is made of polyethylene resin as the main raw material.Adding various additives,then once formed by calendering process , and is a surface (double-sided) composite polypropylene non-woven fabric . A multi-layer polymer synthetic sheet material is selected, is a new type of waterproof material manufactured by a new technology and process.
The product has high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, easy adhesion, small friction coefficient, can be directly used in sand, stable and reliable performance, is a non-toxic, non-polluting Green products.
Polyester linoleum base fabric is a kind of non-woven fabric, which can also be called: tire base fabric, linoleum base fabric, waterproof base fabric. Polyester linoleum base fabric is a non-woven fabric product which is processed by carding, acupuncture reinforcement and dipping and setting of 100% polyester staple fiber . The shape is cloth type.
It is made of high-strength fiber and has the characteristics of high tensile strength, corrosion resistance, aging resistance, high temperature resistance, good thermal stability, good permeability and large elongation. It is the first choice for producing modified asphalt waterproofing membrane.
It mainly used in construction building construction, roofing engineering, underground engineering, bridge deck engineering, waterproofing of water storage tank, moisture proof and anti-corrosion of building foundation.
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material.
Advantage:
1. Convenient construction due to cold application.
2. Excellent adhesion to the base.
3. High tensile strength and elongation.
4. Excellent tear and weather resistance.
Application:
Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool.
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film
with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection.
Features:
Supreme adhesion integrates with the substrate forever with special patent formula
Suitable for various substrates enables to lower resource waste massively and save the cost and time
Unique operation craft of wet treatment,free from primer,no need of heat melt
Size Available
Width-3.28ftï¼?1m
Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m)
Thickness-
N(1.2mm,1.5mm,2mm)
G (2mm,3mm,4mm)
Packaging,storage and shipping
Product is packed into rolls with plastic woven bag
Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature.
sherry@henanjax.com
Polymer-cement waterproof coating is a kind of two-component waterproof coating composed of synthetic polymer emulsion and various additives, which is composed of liquid and matching powder. It is a kind of waterproof material with high elasticity of synthetic polymer materials and good durability of inorganic materials.
It has the characteristics of rigidity and flexibility, and has the extensibility of polymer coating film, water repellency, and high strength of hydraulic cementing material.
Good water resistance, easy to wet base bonding
Good flexibility, can resist the slight vibration of the building structure and a certain degree of displacement, and can be applied on the wet base and firmly bonded
Water-based materials, non-toxic and harmless, non-polluting are environmentally friendly mater.
1185 Sbs Modified Bitumen Waterproofing Membrane Suppliers
Short on time? Let Sbs Modified Bitumen Waterproofing Membrane sellers contact you.
