The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane.
good self heating, easy application, and long service, etc.
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
Description:
SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule.
APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.
Specification:
Thickness: 3mm 4mm 5mm
Width: 1m
Length: 7.5m/10m or customized
Base: Polyester/Fiberglass Felt
Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
SBS modified bitumen waterproof membrane takes SBS
(styrene-butadiene- styrene) thermoplastic elastomer modified
asphalt mixed with additives as base materials, using premium
polyester (PY), fiberglass (G), fiberglass & polyethylene felt
(PYG) as matrix , and adopting sand (S), mineral granule
(M), polyethylene film (PE), aluminum foil etc as dip-coat, which is
produced by stirring and grinding with special equipment.
Features
A)Good low temperature flexibility,it has no crack when
temperature drops into -20â??;Excellent heat resistance,
it has no flow when temperature reaches 90â??
B)Great tensity,prolonged life span,easy to use
C)Suitable forâ? and â?¡grade constructional waterproofing
project,especially for cold area and the project of frequent
structural deformation
Size Available
â?¢Width-3.28ftï¼?1mï¼?
â?¢Length-24.6ft(7.5m)
32.8ft(10m)49.2ft(15m)
â?¢Thickness-
PY (3mm,4mm,5mm)
G (3mm,4mm)
APP modified bitumen waterproofing membrane based on
APP (atactic polypropylene) or APAO, APO (It is reported
that tiring polymer) modified asphalt roofing, high-quality
polyester felt, fiberglass mat base for the child, with fine
sand and mineral tablets (piece) material, PE film for
the cladding material, the use of advanced technology refined
plastomer modified bitumen membrane.
Features
A)Good elongation;Good anti-weathering;Excellent flexibility
B)Strong adhesion;High strength;Anti-abrasion and anti-impact
C)Superior High and low temperature resistance,especially for hot areas
D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew
ADVANTAGES
â?¢Over 1000 cases in waterproofing projects
â?¢Accredited contract observing enterprise
â?¢15 years of experience in waterproofing industry
â?¢Self-contained production line,sound and completed production management systems
â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels
â?¢3 years of innovation in production craftmanship and 10 proprietary products
Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs
of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including
waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Specification
thickness:2mm 3mm 4mm 5mm
width:1m
length:7.5m,10m,15m
Certificate
CE,ASTM standard, ISO
Pakaging
7.5sqm or 10sqm per roll plastic sack by rolls or pallet
1359 Sbs App Modified Bitumen Waterproof Membrane Suppliers
Short on time? Let Sbs App Modified Bitumen Waterproof Membrane sellers contact you.
Product category:
1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY)
2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M)
3. According to membrane performace: I Grade and II Grade
Features:
1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking
of the infrastructure.
2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions
3. Good resistant to acid and alkali corrosion, weather resistance
4. Construction convenience, hot melt method and cold adhesion method.
Usage :
SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and
seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant,
landfill field, canals, water pool, swimming pool etc.
SBS Elastomer modified bitumen membrane is SBS thermoplastic elastomer modified asphalt roofing, high-quality polyester felt, glass fiber mat, glass reinforced polyester mat for the child based, sand, mineral therapy, PE film, aluminum as cladding material, the use of special mechanical mixing and grinding of the elastomer modified bitumen membrane.
Plastic modified bitumen waterproofing membrane APA0 or APP0, AP0 to modified asphalt roofing, high-quality polyester felt, glass fiber mat for the child based, sand, mineral grains chat, PE coverage of membrane materials, use of advanced technology refined plastic modified bitumen membrane.
BRAND:XINLEI
SPECIFICATIONS:
1.Width:1m or as customized
2.Length:from 5-20Meters as customeized
3.Thickness:2/3/4/5mm
4.Face:PE film,colorful sand,mineral granules and Aluminium Foil anti-sunshine and
The sbs modified bitumen waterproof membrane is in polymer modified bitumen for coating,long fiber polyester fiber felt for tire body,metal foil,fine for finish,polyethylene film for isolation layer of a kind of soft waterproof material.Mainly used for high speed railway bridge deck waterproof,this product has good performance, and waterproof construction simple characteristics.
Features:
1) APP/SBS modified bitumen waterproof membrane:
a) Conforms to the national standards
b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area
c) APP is specially suitable for areas of high temperature and of strong sun-shine
Item
APP/SBS modified bitumen waterproof membrane
Brand
Xinlei Waterproof
Grade FirstSecond
Base PY G
Cover PE S M Al
Thickness/3/4mm
Color Black
PE film(or other colors)
Yellow/green/other
Fine Sand
Grey/Green/other
MineralGrains/Flakes
Aluminum
Foil
Notes
PY------Polyester Base
G-------Glassfibre Base
High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives .
High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years.
Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect.
High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product
Fields of application:
The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects.
Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film
with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection.
Features:
Supreme adhesion integrates with the substrate forever with special patent formula
Suitable for various substrates enables to lower resource waste massively and save the cost and time
Unique operation craft of wet treatment,free from primer,no need of heat melt
Size Available
Width-3.28ftï¼?1m
Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m)
Thickness-
N(1.2mm,1.5mm,2mm)
G (2mm,3mm,4mm)
Packaging,storage and shipping
Product is packed into rolls with plastic woven bag
Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
TJ-701 EPDM Waterproof Membrane
EPDM takes the polymer of three monomers Ethylene,Ethylene Propylene,DCPD(dicyclopentadiene) or ENB(Ethylidene Norbornene) through polymerization,adding adequate IIR(Isobutylene Isoprene Rubber),tenderizer,fortifier,filling agent,promoter,vulcanizing agent formulate into a kind of waterproof
material,which enjoys high flexibility and bendable property.
Characteristics
â?¢Excellent anti-ageing,prolonged longevity;Shelf life can last 50 years
â?¢Good strength and tensity/Applicable temperature range(-40~80)
â?¢Great high-temperature,low-temperature resistance
â?¢Single layer applied is applicable and cold applied
Specification
Thickness:1.0/1.2/1.5/2.0mm Width:1.2m Length:20m or customized
Application
Extensively used in basement,tunnel,wall,underground,reservoir,municipal infrastructure,bridge,metro
dam and so forth
Installation
EPDM installation process
Clean Substrateadded waterproofed installation in complex spotspaint primerpaint exclusive gluepave membraneedge treatmentpave membraneedge treatmentprotection layer construction
Attention
1)Clean the substrate:First layer of slurry or concrete needs to be solid,dry,even,no bugle or crack,clean dust,oil of the substrate before paving the membrane
2)Spot strengthen:Extra intensity treatment at complex spots where drainage and deformation center on before paving the membrane on a large scale
3)Membrane pavement:EPDM waterproofing layer is single or multi-layers structure. As for single layer,the thickness should be more than 1.5mm,as for double layers,it should be more than 2.4mm.
TJ-952 PVC waterproof membrane takes PVC resin as main ingredient,adding adequate modifiers,antioxidant agents,UV-light absorbents,color agents,filler agents and so forth,through polymerization and extrusion calendering,deformation,cool,inspection,racking,and packaging processing procedures into bendable waterproofing sheet membrane.It possesses high tensile and good elongation,high and low temperature resistance and it has good hot-melting properties. Cold-adhesive and hot-welding is both available when attending to the overlap of membrane,which forms into a solid,enclosed and integrated waterproofed layer.
PVC membrane is also called polyester fabric inner reinforcement PVC membrane,which is an plastomeric material. It takes polyester fabric textile as reinforcement felt,via special extrusion craft,making the PVC plastic layer on both sides with polyester reinforcement felt amid into an integration.Cutting-edge PVC plastic layer in combination with mesh polyester fabric gets rise to superior dimension stability and extremely low thermal expansion coefficients.
Characteristics
Prolonged shelf life,anti-ageing,used for house application can last over 20 years,underground can last over 50 years
High tensile strength/elongation,small heat-treatment dimensional variation
Great puncture resistance,good anti impact
Easy to install and weld solid;Environmental-friendly
Strong anti chemical,having special use
Specification:
Nominal Thickness:1.2/1.5/2.0mm Width:2.0m Length:15/20m or customized
Application Guide
In combination with the features of PVC membrane,it s usually applied in three methods,such as full-adhesive installation,border adhibiting method and mechanical fastener method. It requires exclusive PVC accessories set to help installation for complicated waterproofing spots.
1:Full-adhesive installation: Using exclusive PVC membrane adhesive set to apply on the substrate under normal condition is called full-adhesive installation
1)Requirement
The substrate needs to be smooth,no crack or bugle spots,clean,dry and the humidity is less than 9%,make the chamfer at internal corner and external corner with the diameter is more than 20mm
Installation process
Substrate treatment Measure,locate and draw lines weak spots strengthening paint the glue on large scale pave the membrane overlap treatment check
