The metallurgical gate valve is installed on the combustion air, gas, cold air and flue gas pipes of the hot blast stove system, cutting off the medium. In general, the gate works only in the full open or full off state and is not suitable for use as an adjustment or throttle.
Suitable for combustion air, gas, cold air and flue gas piping in blast furnace hot blast furnace system
Wedge block is arranged on both sides of valve body to realize forced sealing
Cemented carbide sealing surface
* The SQK Rising Stem Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service.
* They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction.
* Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600.
Main features
* Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet
* Bellows-sealed Gate and Globe valves available
* Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks
* Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor
* T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598
* Rolled ACME thread on stem for smooth operation
* Tapered shoulder on the stem for back seating
* Self-aligning type gland assembly with stud-and-nut tightening
* Integral hard-faced body seat for globe and check valves
* Spring-loaded disc on check valves suitable for no horizontal applications too
* Gate and globe valves can be offered with electrical actuators
* Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion
* Valves can be offered to NACE MR-0175 and other special NACE requirements
Non -rising Stem Gate Valve (DGV01-TF01)
Nominal Diameter: DN40-DN1200
Nominal Pressure: PN1.0/1.6MPa
End Standard: EN ISO GB BS DIN HG JB SANS GOST KSB JIS AS ASME
Design: BS5163 AWWA C509
Face to Face: B$5163 ASME B16.10 AWWA C509 16 GB/T12221
Testing: EN12266-1 APl598
Z45T-10, Z45T-16Q series no-rising stem wedge type single gate valve: manual, flange connection, dark stem wedge type rigid single gate, seat sealing surface material is bronze, nominal pressure PN10~PN16, body material is gray iron (z45t-10), ductile iron (z45t-16q) gate valve.
5818 Rising Stem Single Wedge Gate Valve Suppliers
Short on time? Let Rising Stem Single Wedge Gate Valve sellers contact you.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
Marigolds were first discovered by the Portuguese in Central America in the 16th century.
Marigolds are hardy, annual plants and are great plants for cheering up any garden. Broadly, there are two genuses which are referred to by the common name, Marigolds viz., Tagetes and Celandula. Tagetes includes African Marigolds and French Marigolds. Celandula includes Pot Marigolds.
Kingdom : Plantae
Division : Magnoliophyta
Class : Magnoliopsida
Order : Asterales
Family : Asteraceae
Genus : Tagetes, Calendula
Marigolds come in different colors, yellow and orange being the most common. Most of the marigolds have strong, pungent odor and have has great value in cosmetic treatment. There are many varieties of Marigolds available today. Some of the major Marigold varieties are listed below:
African or American Marigolds (Tagetes erecta): These marigolds are tall, erect-growing plants up to three feet in height. The flowers are globe-shaped and large. Flowers may measure up to 5 inches across. African Marigolds are very good bedding plants. These flowers are yellow to orange and do not include red colored Marigolds. The Africans take longer to reach flowering stage than the French type.
French Marigolds (Tagetes patula): Marigold cultivars in this group grow 5 inches to 18 inches high. Flower colors are red, orange and yellow. Red and orange bicolor patterns are also found. Flowers are smaller, (2 inches across). French Marigolds are ideal for edging flowerbeds and in mass plantings. They also do well in containers and window boxes.
Signet Marigolds (T. signata 'pumila'): The signet Marigolds produce compact plants with finely divided, lacy foliage and clusters of small, single flowers. They have yellow to orange colored, edible flowers.The flowers of signet marigolds have a spicy tarragon flavor. The foliage has a pleasant lemon fragrance. Signet Marigolds are excellent plants for edging beds and in window boxes.
Mule Marigolds: These marigolds are the sterile hybrids of tall African and dwarf French marigolds, hence known as mule Marigolds. Most triploid cultivars grow from 12 to 18 inches high. Though they have the combined qualities of their parents, their rate of germination is low.
Marigold (Calendula) is an extremely effective herb for the treatment of skin problems and can be used wherever there is inflammation of the skin, whether due to infection or physical damage; for example, crural ulceration, varicose veins, haemorrhoids, anal fissures, mastitis, sebaceous cysts, impetigo or other inflamed cutaneous lesions.
As an ointment, Marigold (Calendula) is an excellent cosmetic remedy for repairing minor damage to the skin such as subdermal broken capillaries or sunburn. The sap from the stem is reputed to remove warts, corns and calluses.
Forged Steel Gate Valve API 602 Gate Valve Flanged Raised Face NPT Or BSPT Ends  B.W Or S.W Ends Solid Wedged Type Bolted Or Welded Cover API 6D & CE Certified
Forged steel gate valves Glofa produced which sizes are 3â?³(DN80) and smaller, compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances.Forged steel gate valve Glofa offered have superior properties of heat preservation and cold preservation, the valveâ??s bore diameter are same as the pipelines and the medium flows in straight lines, resulting in that the resistance force are small and could prevent the heat losing effectively, this type valve are better choice for the fluid which is easy to solidify and with higher viscosity
Glofaâ?? forged steel gate valve is with wedged type sealing structure, it is sealed by the wedge compressing on the seat, this sealing type make it possible unaffected by the pipeline pressure difference. The forged steel gate valve Glofa design are with self-cleaning structure, the fluid flow through the valve along on the sealing surface in 360 , which could eliminate the crash to the seat by the fluid in high speed, also flush away the dirties on the sealing surface.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
Material
Serial no. Part
1 Hand Wheel Ductile iron
2 Stem nut Copper alloy
3 Support ductile cast iron
4 Gland Ductile cast iron
5 Gasket Buna-N rubber
6 Stem Stainless steel
7 Gasket Buna-N rubber
8 Disc Ductile cast iron packed with EDPM outside
9 Body ductile cast iron.
