Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Function
Gas mask Can prevent various organic gases, such as formaldehyde, gasoline, ether, suitable for spray paint, oil, machinery, polishing, dust and other workplaces
A.The full face gas mask made by high grade silica gel, endure the aging , avoiding allergy, durable , easy to clean.
B. Double-folded the silica gel structure enhanced air tightness and face fitness
C. The dual headphone with adjustable straps design more comfortable to wear
D. Push type and replaceable cartridge
E. The unique audio device, allowing you to disseminate the messages more clear.
F-Large valve disc breathing valve design,breathing resistance is small,let the wearer enjoy smooth breathing.
G.Double filtration box filtration, double filtration area, low breathing resistance -The universal installation structure can be
separately anti-virus or dust-free, and can be easily switched. -Military active carbon with
large adsorption capacity and high
Strength -Double filtration agent has long service life Half Face Gas Mask is composed of the body of mask, the cartridge, Inhale
and exhale valves, headbands. -It is designed for painting and organic vapor protective (95% effectiveness) -
The mask can be taken off and hanged on the neck during rest time. - Replacement parts available, filters sold separately.
MAKEND�° CBS 355E is a hydrogenated and fractionated Palm Kernel Oil based Cocoa Butter Substitute (CBS) with very sharp melting profile thus providing excellent mouthfeel.
PACKING:
20kg or 25kg cartons with PE liners.
SHELF LIFE:
Shelf life 12 months from date of manufacture, provided, product is stored in original unopen packing in a cool, dry and odour free area with ambient temperature not above 20�°C and below 60% relative humidity.
Cocoa butter substitutes (CBS) are vegetable fats used to replace cocoa butter in chocolate and confectionery products. They are typically made from lauric acid oils like coconut or palm kernel oil. A key specification for CBS is that they are not compatible with cocoa butter and are used to completely replace it. Specifics include a slip melting point of 33-35�°C, a maximum iodine value of 1.0, and a maximum free fatty acid content (as lauric acid) of 0.1%.
Physical and Chemical Properties:
Slip Melting Point: The range is typically 33-35�°C.
Iodine Value: A maximum of 1.0 (Wijs) is generally specified.
Free Fatty Acid (FFA): Maximum of 0.1% (as lauric acid).
Moisture and Impurities: A maximum of 0.1%.
Saponification Value: Typically between 240 and 260.
Color: Can be white or pale yellow.
Appearance: Should be white or pale yellow with a bland flavor and no odor.
Solid Fat Content: While not a universal specification, some patents mention solid fat content at various temperatures, for example, 35-60% at 10�°C, according to WO2013132284A1.
Class: 2.2 (Non-flammable gas)
Global Warming Potential (GWP): 1774
Ozone Depletion Potential (ODP): 0
Packaging Quantities:
Disposable Cylinders: 1150 units without pallets / 900 units with pallets
Refillable Cylinders: 800 units with pallets / 1034 units without pallets
R407C Applications
R407C is a zeotropic blend composed of difluoromethane (R32), pentafluoroethane (R125), and 1,1,1,2-tetrafluoroethane (R134a). Each component serves a specific function:
R32 provides heat capacity.
R125 reduces flammability.
R134a lowers operating pressure.
R407C is recognized as a long-term replacement for R22, sharing similar performance characteristics. It is widely used in air conditioning systems and non-centrifugal refrigeration systems for medium and high temperature applications, making it an ideal solution in a variety of HVAC setups.
2093 Replacement Trane F Cylinder Liner Suppliers
Short on time? Let Replacement Trane F Cylinder Liner sellers contact you.
We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess
ENGINE SPECIFICATION
ENGINE MODEL Detroit Diesel 8163-7416 1232HP
ENGINE NO. 16VF013546
RPM 1,800
Cylinder 16
Injection method Direct injection
Cooling method Water Cooled
Fuel consumption rate 246â??/h
GENERATOR SPECIFICATION (AC Generator, 3Ã??, 60Hz, Brushless type
Generator Model DIG 4800
Emergency output 990 kVA / 792 kW
Continuous output 900kVA / 720kW
Voltage and Current 600 v x 86.6 A
Revolution 1800RPM
Excitation Voltage/Current 65V/10A
Power Factor 80%
Insulation Class F
The products of our factory are strictly manufactured according to API7K Standard and got the ISO90012000 international quality system very early Our products are sold very well to Shengli Oilfield Daqing Oilfield Zhongyuan Oilfield etc in China Meantime export to USA Canada Brazil Europe South Asia etc more than 70 Countries and Areas The factory is a First Grade Supplier of SINOPECCNPC
High Quality of Products Best Price and Excellent Services Fixed the cooperation base with our Customers We sincerely welcome friends from home and abroad to our factory for business negotiation
Details
Bimetal liner is one of the main products of our company and is currently the most widely used one of the biggest mud pump hydraulic parts Our production bimetal liner is a combination of hot forging high wear coat and the advantages of high chrome wearresisting corrosion inner sleeve The outer sleeve is made of quality carbon steel hotpressing time forming inner sleeve made from high chromium cast iron centrifugal casting And the tensile strength of our sleeve is higher than 900000 psi the hardness of inner sleeve after heat treatment is greater than HRC62 and can bear the mud pressure of 7000 psi its surface smooth as a mirror inner hole size tolerance strictly the normal service life is up to 800 hours We can produce F series PZ 3NB T TPK UNB UNBT BRN such as various types of cylinder liner
We can supply these liner or according to your drawing
BOMCOEMSCO
F500 F800 F1000 F1300 F1600 FB1300 FB1600 D375 D700
LANSHI
3NB1300C 3NB1000 3NB1000C 3NB800
QINGZHOU
SL3NB1300A QZ1000 QZ500 QZ350 QZ800 SL3NB1600
GARDNER DENVER
PZ7 PZ8 PZ9 PZ10 PZ11
IDECO
T500 T800 T1000 T1300 T1600
NATIONAL
7P50 8P80 9P100 10P130 12P160 14p200 14P220 K700 K700A K500 K500A
OILWELL
A350PT A560PT A600PT A850PT A1100P A1400PT A1700PT
RUSSIAN
8T650 UNBT600 UNBT950 UNBT1180L UNBT950A UBT400 BT600 UB590 UNB600 8T310 8T65001
Double metal cylinder liners are made with a forged steel outer shell and a abrasion and corrosion resistance of a high chromium iron inner sleeve.The dimensional accuracy should be strictly controlled in the production process, which can ensure they are easy and steady to install.With high finish and high hardness the inner sleeve has good character of wear resistance,corrosion-proof and long using life.This product is suitable for all kinds of bad working conditions. Its normal life is more than 800 hours.
Production Process: The bi-metal cylinder Liner of our company combined with the advantages of abrasion hot-forging out liner and anticorrosion high chrome inner liner. The out liner is made of high quality carbon steel by hot pressing forming. Its tensile strength is over 900000psi. The inner liner is made of high-chromium alloy by centrifugal casting.
Some of routine liner includes following vehicle models:
Audi-Bedford-Caterpiller-Cummins-Daf-Dodge-Gardner-Lister-Landrover-Lotus-Mercedes-Morris-Peugeot-Peykar-Rover-Ruston-RVI-Seat-Volvo-Zetor-Scania-Hino-Daihatsu-Isuzu-Mazda-Mitsubushi-Nissan-Toyato-Hyundai-Kia-Perkins-Fiat-Iveco-Ford.
In corrugated box containing liners from 2 to 4 in a box
