1.Adopt thread cold rolling technology, no cutting of rebar parent metal, the strength of threaded end is higher than its parent metal.
2.With spiral lead angle technology, easy to roll thread and ensure higher thread accuracy.
3.Rib peeling device adopts automatic opening-closing mechanism. With high efficiency, need only 20 seconds to finish a threaded end.
4.Be able to process rebar sizes 14-40mm, and max. thread length is 120mm for 16-32mm rebar, and 100mm length for 36-40mm rebar with 7.5kw electric motor.
5.The updated version of AGS-40C and AGS-40Z, the wheelbase and shaft diameter of reducer is bigger than AGS-40 and 40E, so that the machine length is longer than AGS-40C.
6.The height of electric motor and reducer is lower than before, so that it could reduce the center of gravity of the whole machine.
7. Equipped with air compressor.
8. There are 2 machine heads for AGS-50D, 1 is for 14-40mm, and the other for 50mm rebar screw.
process 14-40mm rebars, thread length grt to 120mm.
1. Roll thread not cut thread, so could protect the highest tensile strength of parent metal. It meets requirements in JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc.
2. Easy to operate. Automatic opening-closing mechanism for rib peeling device, need only 30 seconds to finish a threaded end.
3. Peel ribs and roll threads by the same machine, so could save labor and improve productivity.
4. Widely used. Be able to process rebar diameter 16-40mm
5. Environment-friendly, safe, no environment and weather restrictions.
6. Economic, low investment for the equipment
ebar thread rolling machine is developed according to the market demand. It is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects.
It can process the ribbed bars from HRB335-HRB600 with diameter12-50 mm.
The parallel thread rebars processed by the rolling machine will have good comprehensive mechanical properties with the continuous and compact metal fibers.
Tensile Strength: increased by 20%-30%;
Fatigue Strength: incread by 40%ï¼?60%,
Corrosion Resistance: increased by 50%-200%;
The strength of steel bar joints is higher than that of steel bar base materials. The mechanical properties of steel bar joints meet and exceed the domestic and international standards.
179286 Rebar Thread Rolling Machine Suppliers
Short on time? Let Rebar Thread Rolling Machine sellers contact you.
DBG-40C thread rolling machine is the key equipment to realize the splicing of reinforcing bars.It is mainly used for the processing of parallel thread head of ribbed reinforcing bars in bridge and reinforcing cage piling construction projects.
It can process the ribbed bars from HRB335,HRB400,HRB500 and HRB600 with diameter12-40mm.
Dbg-40b is designed for processing parallel threads for rebar mechanical connection, can process hrb335, hrb400, hrb500 reinforced bar with diameter 16--40mm. The max thread length is 80mm.
Features
1 completing processing steel thread one-time with thread plump & smooth;
2 both right-handed threads &left-handed threads could be processed;
3 three points and one line, high concentricity and strong stability;
4 rebar simply feed and automatic carriage return after rolling;
5 shortening construction period. High processing speed and production efficiency.
6 easy and convenient operation; no pollution; no more material waste; no restriction of the weather.
7 reasonable structure, reliable performance.
8 fast installation, no need for skilled technicians.
9 processed thread is more precise£¬with small conical degree and surface is more smooth.
10 600-900 heads per day.
Technical parameters
Model:dbg-40b
Rebar diameter:16-40mm
Motor power:4kw 8a
Voltage:3-380v 50hz
Thread angle:75¡ã, customized
Thread pitch:2.0-3.5mm
Spindle speed:48-82 r/min
Max thread length: 80mm
Dimension:1*0.7*0.9m
Net weight:400kg
Certification:iso9001-2008
This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts.
Parameter:
Rebar diameter range: 16-40
Output speed Reducer:62r/min
Electric motor power:5.5KW
Water pump motor power: 0.15KW
Cutting head movement distance:150mm Or unlimited
Out dimension(mm):1700*1000*1400mm
Weight:1200Kg
5. Easy to exchange clamping dies and operate the machine
6. Safe machine with CE Certificates
Specification
Working diameter 6-60mm
Clamping method Hydraulic
Working method Manual feeding, auto chamfering
Spindle speed 650-1300rpm (variable speed)
Chamfering angle 30/45/60 degree
Functions Chamfering & turning end face
Output(pcs/min) 10-25(pcs/min)
Main power motor 1.75KW
Hydraulic motor 0.75KW
Supply voltage 380V 3P 50Hz
Weight(reference) 320(KG)
Package Dimension(L*W*H) 1330*950*1300 mm
Dimension(L*W*H) 1230*850*1150 mm
Q1. Are you factory or trading company ?
A1. We are factory of manufacturing thread rolling machine and dies by ourselves.
Welcome to visit our factory, if possible.
Q2. What is the delivery time ?
A2. Usually 15-25 working days for machine, and 10-15 working days for dies.
Q3. What is the warranty time for machine?
A3. Usually 12 months from B/L date.
Q4. What is the payment term?
A4. T/T, Western Union, Money Gram, Alipay, PayPal.
50% as deposit, and 50% before shipping.
Q5. Is it possible to design and produce automatic loading & unloading devices?
A5. Yes, Engineer can design special auto feeding device according to your products.
But please provide the drawing of your products before that.
Q6. How will you solve problems that we face during using your machine?
A6. A. Please provide necessary videos and pictures that can show the problems, our engineers will check and give corresponding solutions.
B. Will arrange engineers to solve problems at the scene, if possible.
Introduction
Model number D12-D50
Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel
Thread parallel thread
Thread Pitch 2.5mm, 3.0mm, 3.5mm
Thread angel 60/75
Certification ISO9001
Standard JG/T163-2013
Outer diameter 22mm-59mm
Length 40mm-90mm
Finish plain/ smooth
Customizde remark available
Type left-handed, right-handed, reduce, etc
Application connecting steel rebars in construction
Tensile Strength 100% bar break more than 600Mpa
Technics cold extrusion or upset
Specification
1.Use to splice rebar dia 12--50mm;
2.Apply to HRB335, HRB400 and HRB500 reinforced the connection;
3.High strength, tensile test usually more than 600Mpa, reach 110% of yiled strength of parent rebar;
4.Standard type, left-handed and right-handed type, reducing type, wide mouth type, nut locking type ect;
5.Raw material-saving, high energy conversation, high work efficiency;
6.Satisfy the rebar splicing needs of longitudinal, traverse and slant ect.;
7.No pollution, not influenced by weather and work-site;
8.Reliable quality, the raw material origin and production batch can be traced;
9.High dimension precision, and reliable quality;
10.Easy to operate, no torque wrench required.
Packing & Delivery
carton case and wooden pallet or customized
Delivery Detail: within 7 days after receiving payment
Paymant Terms: L/C,D/A,D/P,T/T,Western Union
Our Service
1.OEM Service & Design Service & Buyer Lable are offered;
2.Prodece as customers' requirement.
3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect.
4.Our rebar couplers are suitable for steels of different countries
Company Information
Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products.
With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market.
Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved
ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc.
In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.
Introduction
Model number D12-D50
Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel
Thread parallel thread
Thread Pitch 2.5mm, 3.0mm, 3.5mm
Thread angel 60/75
Certification ISO9001
Standard JG/T163-2013
Outer diameter 22mm-59mm
Length 40mm-90mm
Finish plain/ smooth
Customizde remark available
Type left-handed, right-handed, reduce, etc
Application connecting steel rebars in construction
Tensile Strength 100% bar break more than 600Mpa
Technics cold extrusion or upset
Packing & Delivery
carton case and wooden pallet or customized
Delivery Detail: within 7 days after receiving payment
Paymant Terms: L/C,D/A,D/P,T/T,Western Union
Our Service
1.OEM Service & Design Service & Buyer Lable are offered;
2.Prodece as customers' requirement.
3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect.
4.Our rebar couplers are suitable for steels of different countries
Company Information
Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products.
With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market.
Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved
ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc.
In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.
Introduction
Model number D12-D50
Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel
Thread parallel thread
Thread Pitch 2.5mm, 3.0mm, 3.5mm
Thread angel 60/75
Certification ISO9001
Standard JG/T163-2013
Outer diameter 22mm-59mm
Length 40mm-90mm
Finish plain/ smooth
Customizde remark available
Type left-handed, right-handed, reduce, etc
Application connecting steel rebars in construction
Tensile Strength 100% bar break more than 600Mpa
Technics cold extrusion or upset
Specification
1.Use to splice rebar dia 12--50mm;
2.Apply to HRB335, HRB400 and HRB500 reinforced the connection;
3.High strength, tensile test usually more than 600Mpa, reach 110% of yiled strength of parent rebar;
4.Standard type, left-handed and right-handed type, reducing type, wide mouth type, nut locking type ect;
5.Raw material-saving, high energy conversation, high work efficiency;
6.Satisfy the rebar splicing needs of longitudinal, traverse and slant ect.;
7.No pollution, not influenced by weather and work-site;
8.Reliable quality, the raw material origin and production batch can be traced;
9.High dimension precision, and reliable quality;
10.Easy to operate, no torque wrench required.
Packing & Delivery
carton case and wooden pallet or customized
Delivery Detail: within 7 days after receiving payment
Paymant Terms: L/C,D/A,D/P,T/T,Western Union
Our Service
1.OEM Service & Design Service & Buyer Lable are offered;
2.Prodece as customers' requirement.
3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect.
4.Our rebar couplers are suitable for steels of different countries
Company Information
Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products.
With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market.
Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved
ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc.
In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.
Features
1. Hydraulic full-automatic, fast speed.
2. Cutting thread on forged bar with chaser, threading diameter 16-40mm(upsetting M20-M45mm).
3. Strength of the joint is higher than the rebar material.
4. Thread is full enough, max. threading length is 150mm.
6. Thread pitch is from 2.0 to 4.5mm with high accuracy.
Parallel thread rebar coupler
1.Raw material: 45C or 40Cr
2.Type:standard type, left-handed and right-handed type, reducing type.
3.ModelNo.:D14-D40
4.Thread pitch:2.5mm,3.0mm,3.5mm
5.Thread Angle:75/60 degree
Remark:other specification can be made to order.
Goods are usually packed with carton and wooden pallet. We can also pack the goods according to customer's special demand.
CNPOW Double Servo Cutting Machine is divided into 60 type, 80 type, 120 type and so on.It is suitable for pipe cutting
in various industries.
The height tolerance of the product can be less than 0.07 mm, and the output can be 20-40pcs/min.
CNPOW DKG series CNC Pipe Cutting Machine adopts PLC control, touch screen settings, cutting and positioning drive using two servo systems, high positioning accuracy, sliding part using high precision cross ball guide effectively ensuring the machine steelness and product precision.
The S-500 Automatic Rebar Parallel Thread Cutting Machine features a variable speed spindle. The opening and closing of the Chaser, as well
as the clamping and releasing of the workpiece, are operated via a pneumatic-hydraulic linkage, making it a semi-automatic threading
machine. The machine is equipped with two limit switches and two adjustable stops, allowing for precise adjustment of the distance
between the stop and the limit switch, ensuring the production of threaded lengths that meet technical requirements.
Rebar fabrication equipment, bsts rebar thread cutting machine used for LINXION PI mechanical connection, best selled in India market.
The advantages:
1.High efficency by manual operation of thread cutting;
2.Easy operate, no need to change other parts at same thread pitch, applied for 16-40mm all diameter deformed bars.
3.Easy and simple for working man
179286 Rebar Thread Rolling Machine Suppliers
Short on time? Let Rebar Thread Rolling Machine sellers contact you.
