Description:
VCOLD is a rapid-setting structural repair mortar. It is designed primarily for the durable repair of concrete. Utilising all the latest technology this Portland cement-based and fibre-reinforced product is extremely strong and hard wearing. This makes it ideal for roads, runways, bridges, decks, floors and footpaths. Requiring only the addition of water, this single component mortar is rapid curing.
VCOLD quick set mortar is physically and chemically compatible with the host concrete. This means it is quick to exhibit a high adhesive and compressive strength.
Product name: VCOLD
Compressive strength
- 35 Mpa, in 6 hours
- 50 Mpa, in 1 day
- 80 Mpa, in 1 week
Application temperature
- In cold temperatures, tepid water may be used to adjust working life
- In 20-40 temperatures, cold water should be used to adjust working life
Mixing ratio:
- 25kgs powder: 3,7L water
- 5kgs powder: 0.7L water
Uses of VCOLD
VCOLD is used on floors that are subjected to heavy wear such as:
- Roads
- Runways
- Bridges
- Decks
- Floors
- Footpaths
The repair mortar can be used as supplied up to 100mm deep. It can also be bulked out with clean, washed, sharp sand to form a high performance screed or for floor or deck repairs up to maximum depth of 300mm.
One barrel 25kgs of VCOLD produces 13 litres
Applying VCOLD Rapid Set Repair Mortar:
VCOLD should only be installed by those experienced in structural waterproofing. Please follow manufacturerâ??s instructions for full details across the range of applications.
Preparation â?? Start by mechanically removing all damaged concrete back to a sound core. Ideally you want to expose the steel reinforcement to at least 25mm behind the bars and 50mm beyond the point at which corrosion is visible.
The perimeter of the repair area should be stepped to a depth of 10m using a saw, disc cutting or preferably a power chisel.
Make sure that all areas to be repaired are free from dust, oil, grease, corrosion by-products and all organic growth. Any smooth surfaces should be roughened with any surface laitance removed.
You should now thoroughly soak the prepared surface with clean water until uniformly saturated. Ensure there is no standing water.
Mixing:
Mechanically mix VCOLD using a forced action pan mixer or in barrel using a drill and paddle.
Normal applications = typically use 3,7 litres of clean water per 25kgs barrel
Normal applications = typically use 0.7 litres of clean water per 5kgs barrel
Note:
- In cold temperatures, tepid water may be used to adjust working life
- In 25-40 temperatures, cold water should be used to adjust working life
Important Note:
The product cannot be mixed using a normal concrete mixer. Pot life is about 10 minutes, depending on the temperature and humidity. For screeding applications or deep repairs consult technical sheets.
We supply the Required Grade and Type of Cement that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.
Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.
We represent a set that consists of 6 types of essential oil - peppermint, basil, salvia, lavender, juniper, pine.
Every bottle consist of 10 ml pure and with the highest quality essential oil.
All products are certified and 100 % natural.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
18750 Rapid Set Cement All Mixing Ratio Suppliers
Short on time? Let Rapid Set Cement All Mixing Ratio sellers contact you.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Product Description :
Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries.
Price of product ( USD price or FOB price) :
10.000 MT monthly market price.
100.000 MT monthly market price Less 8%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
Fuel Grade Petroleum coke of Low/High Sulphur.
Calcium Petroleum coke, Graphitized Petroleum coke.
Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
Green Tree was recently appointed as a US sales and marketer of premium Quality Ghana and Nigeria cocoa by several cocoa farmers in Ghana and Nigeria. We are extremely excited about this opportunity to bring our clients a new product offering.
The cocoa being offered is excellent in every respect, as you know Ghana and Nigeria remains the producer of the best quality bulk cocoa.
The minimum Quality standards set by Ghana Cocoa Board exceed the benchmarks set in the international cocoa market for the trade in Good Fermented and dried Cocoa. From Ghana we offer product from all the six region of Western, Central, Brong Ahafo, Eastern, Ashanti and the Volta regions.
And from Nigeria we offer product from the southern region of lkom and Umahail, western region of Odode, Aade, Ondo, Owo, Ore, Bagbe, Owena, Akure and Osun. Pricing is excellent.
Gypsum (CaSO4.2H2O) is a naturally occurring mineral mined from deposits formed by ancient sea beds as a raw material, white when pure, but commonly grey, yellow, red or brown, owing to impurities. The anhydrous form (CaSO4), anhydrite, is common. We are enlisted amongst the topmost INatural Gypsum Importers and Exporters from India.
Applications:
Gypsum has many industrial applications in its raw or Calcined forms, especially in the building and construction industries. Uses of Raw Gypsum are principally as:
- a retarder for Portland cement
- a fertilizer or soil conditioner
- mineral filler
- oxidizing agent in glass manufacture or other industrial applications.
Most gypsum is calcined and used in the manufacturing of plaster products. Wallboard and plaster requires gypsum contents greater than 85%, although producers prefer a minimum of 94–95% along with whiteness in color. The major consumers of the Gypsum at present are Cement Industry. By weight about 4% to 6% Gypsum in crushed condition is utilized in Portland Cement Manufacture after mixing with cement/clinker. Gypsum acts as a retarder and controls the setting time of cement.
Imported Gypsum from Iran:
Natural Gypsum is one of the most superior qualities and consistent material available for Import and Export. Natural Gypsum has adequate whiteness, high purity as well as it is low in cost which makes it absolutely feasible for white cements as well as Plaster Of Paris manufacturing and for the Cement Industry all together. One more important quality that distinguishes Natural Gypsum from others is its hardness which is less as compared to other sources and allows different industries to easily grind the same for processing into final product which in turn results in to reduced power consumption for manufacturing industries.
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.
Applications:
Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.
Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.
Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.
Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.
Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.
Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.
Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Take 100gms of instant jam mix in a vessel and add 150ml of water(For 1 cup of jam mix 1 1/4cup of water). Mix well without lump formation.
Boil the mix for 5 mins and reduce the burner level to simmer.
Hold it for 5 minutes without stirring or until it reaches setting point of 1040C at low flame. Allow the jam mix to cool. Transfer the mix to sterilized container.
The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market. * Portland Cement is the most common type of cement used for concrete, and stucco. Types Of Cement We offer include: Ordinary Portland Cement Portland Pozzalana Cement White Cement Portland.
Origin :- Vietnam . Turkey
Instant Sauce Base Mix is a Vegan, Gluten-Free, Plant-based and Non-GMO functional food ingredient which serves as an Instant base for all types of
Sauce and Ketchup. Instant Sauce Base Mix has excellent Shear Stability and Water Holding Capacity and it is ideal for Instant sauce preparations. It acts
as Texture enhancer, Thickener, Stabilizer, Volumizer, Mouth feel enhancer and improves the flow behaviour of sauce and ketchup. Instant Sauce Base
Mix is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG).
SauMix is a Vegan, Gluten-Free, Plant-based and Non-GMO starch which makes Soups, Gravies and Sauces - Tastier, Smoother, Thicker and Yummy. SauMix has excellent Shear Stability and Water Holding Capacity. SauMix is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
TOMATO KETCHUP & OTHER SAUCE:
Mix 3-5 % of SauMix in partial amount of water and completely mix without any lump formation. Then add it along with remaining water to the sauce, after adding all other raw materials.
TOMATO SOUP:
Mix 2 -3 % of SauMix in required amount of water and add at the last of cooking for Soups. For Instant Soup mixes, Add required percentage of SauMix along with all dry ingredients and mix well.
PREMIXES (INSTANT SOUP MIX, KETCHUP MIX, AND SAUCE
MIX):
Mix 3-5 % of SauMix at the time of blending while adding other raw materials
FEATURES AND BENEFITS
ï?? Improves thickness of the sauce, soups and ketchups.
ï?? Better dispersion of spices and other ingredients uniformly.
ï?? Improves smooth texture of sauce, soups and ketchups.
ï?? Enhance product's flavor.
ï?? Stable high viscosity.
ï?? Excellent shear stability.
ï?? Excellent water holding capability. During the shelf life, it maintains the consistency and avoiding the water separation.
ï?? 100% Natural and 100% vegetarian product.
DOSAGE
For excellent results, use 3 to 5% SauMix of total batch size.
Instant Soup Base Mix is a Vegan, Gluten-Free, Plant-based and Non-GMO functional food ingredient which serves as an Instant base for all types of soups. Instant Soup Base Mix has excellent Shear Stability and Water Holding Capacity and it is ideal for Instant soup preparations. It acts as Thickener, Binder, Volumizer, Mouth feel enhancer and Stabilizer. Instant Soup Base Mix is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG).
FEATURES:
Helpful for Instant preparation where desired consistency is obtained by the addition of boiling water
It acts as an excellent thickener and volumizer
It can also be used as binder in preparation of bouillon and broth
Provides smooth texture and mouth feel to soup preparations
Better dispersion of spices and other ingredients uniformly
Enhances the flavor and appearance of the product
Improves the viscosity of the product
Excellent shear stability and better water holding capacity
Provides the stability to prepared soups preventing water separation
100% Natural and 100% vegetarian product.
It has no added fat, no added preservative and no added flavor enhancer
18750 Rapid Set Cement All Mixing Ratio Suppliers
Short on time? Let Rapid Set Cement All Mixing Ratio sellers contact you.
