Double Side Rail Hole Chamfering Kit
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering
device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
Specification
Model LJ-DJQ-S
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) 40*15 cm
Chamfer Diameter �?31-�?32
Chamfering Size 1�?45�°, 2.5�?45�°
Application 43kg/m,50kg/m,60kg/m rail
Weight 2.8KG
Double Side Rail Hole Chamfering Kit
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering
device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
Specification
Model LJ-DJQ-S
Type Rail Chamfering Tool
Material Stainless Steel
Dimensions (L x W x H) 40*15 cm
Chamfer Diameter 31-?32
Chamfering Size 145°, 2.5 45°
Application 43kg/m,50kg/m,60kg/m rail
Weight 2.8KG
Double Side Rail Hole Chamfering Kit
The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering
device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long.
The double chamfer is used for chamfering the holes on the waist of railway rail.
The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench.
The double - sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency.
The blade is disk - shaped, the blade on the whole circumference is sharp and wear - resistant, and the service life is long.
Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg
Automatic single-sided saw bone meat machine with 1pcs saw blade, automatic bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Paramters:
Machine size : 1350x2170x1700mm
Workbench size: 650x800
Food height for card loading (mm): 150
Dimensional accuracy (mm): 0.1
Cut thickness (mm): 80
The highest saw blade movement (m/s): 34
Saw blade specification (mm): 3084x16x0.56
Motor power (Kw): 3.5
Voltage: 380V/50HZ
Weight: 1100KG
Pressure increase (MPa): 0.4
Air volume requirement (L/min): 10
Cut back (times/minute): 10
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
Size:
International standard
A4: 210 x 297mm
A3: 420x 297mm
8.5 x 11-inch (216 x 279mm)
8.5 x 14-inch (216 x 330mm)
Key Performance:
No jam in photocopy machine
No double feed
Stay flat after copying
Leave no dust in the copy-machine
Nice appearance-white and clean
Nice touch-smooth and bulky
No see through-print both sides
Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
Acid etched glass is annealed glass treated with acid to give its surface a frosted look. Entire sheets of glass can be acid etched, or small sections can be treated to add specific designs. It make glass artistic, beautiful and long lasting. Normal acid etched glass can be used to create doors, partitions, walls, shelves, and railings, special items can be used as â??anti-glare glassâ?? for picture frame, screen, etc.
Product items :� single side acid etched glass / double side acid etched glass
Thickness :2-19mm
Size :2440x3660mm 2140x3300mm,1830x2440mm,1220x1830mm, any cut sizes
JH acid etched glass is annealed glass treated with acid to give its surface a frosted look.Entire sheets of glass can be acid etched,or small sections can be treated to add specific designs. It make glass artistic ,beautiful and long lasting .Normal acid etched glass can be used to create doors,partitions,walls,shelves,and railings, special items can be used as �?�¢??anti-glare glass�?�¢?? for picture frame , screen ,etc.
Product items : single side acid etched glass / double side acid etched glass
Super-Sweet Beekeeping Tool Kit Complete Set No Graft Queen Rearing System Kit
Basic Information
Place of Origin:
china
Brand Name:
Super-Sweet
Minimum Order Quantity:
1sets
Packaging Details:
bee queen rearing 4pcs/carton
Delivery Time:
5 days
Payment Terms:
D/A, L/C, T/T, Western Union, MoneyGram
Supply Ability:
10000 Piece/Pieces per Month bee queen rearing
JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass .
JH temperable mirror Advantages
SUPMIROR offer more solutions for building fa�§ade and interior decoration.
SUPMIROR without paint content, more environment friendly
SUPMIROR is easy for processing with tempering, laminating, curving and acid etching.
JH temperable mirror Application
SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space.
Splashback
SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life.
Interior partitions and doors
After toughened or laminated, SUPMIROR is compatible with modern fixing systems
Baths, showers partitions ,doors
SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture
One-way mirrors
SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror.
Double sides mirror
SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door
12811 Rail Hole Double Side Chamfering Tool Kits Suppliers
Short on time? Let Rail Hole Double Side Chamfering Tool Kits sellers contact you.
