Find Verified R 30 Tripoli Compound Silicon Dioxide Suppliers, Manufacturers and Wholesalers

Synonym: Silica Sand, Quartz Sand, SiO2
Color: Rose
Weight: 1-Ton, 100-lb, 50-lb, 5-lb, 1-lb, 8-oz, 4-oz, 1-oz
Features: Industrial Sand, Low Cut (higher color)

Loading Level (%): Varies, typically 40-60.

Uses/applications:
Aquaculture, Agriculture, Apothecary, Ceramics, Dental Laboratory Technicians, Hobbyists, Hydrothermal Technologies, Jewelers, Lapidaries, Machinists, Medical, Metal Workers, Manufacturers, 3D Printing, Abrasives, Aggregates, Automobile, Cement, Ceramic, Chemical, Detergents, Electronics, Industrial, Feeds, Filters, Dynamite / Fireworks, Glass, Hydroponics, Oil and Gas, Paint, Pesticides, Plastics, Rubber, Sealants, Solar Panel, Salt-water-pool-delivered, Veterinarian, Model Makers, Optical, Painters, Woodcrafters

Brand: American Tripoli
Condition: New
Shipping: Standard Shipping (USPS First Class�®)

Loading Level (%): Varies, typically 40-60.

Technical Data:
Cilas Particle Size Distribution:
Mesh R-30
65 0.00
100 0.00
150 0.00
200 Trace
325 .035
400 .113
-400 99.851

99.9% Less than 50 micron
95% Less than 20 micron

Chemical Analysis: (typical values)

SiO2 94.03
TiO2 0.08
Al2O3 2.34
Fe2O3 0.83
FeO 0.03
MnO 0.01
MgO 0.23
CaO 0.89
Na2O 0.03
K2O 0.16
P2O5 0.01
CO2 0.03

Unreported 1.33
Loss on ignition 1.85
Ph 5.3-6.0
Fusion point (degrees C) 1640
Bulk density (lb/cu. Ft) 41
Oil absorption (g/100g) 45
Specific Gravity 2.55


Buy direct from the manufacturer, with no middleman. Manufactured and distributed by American Tripoli, Seneca, Missouri 64865 - U.S.A.
Depending on the quantity (weight) purchased, each purchase includes:
(1) purchased weight of the product
(1) appropriate weight bag
(1) Wooden Pallet (for 100lb & 1Ton)
(1) Stretch Wrap double wrapped (for 100lb & 1Ton)

We are supplier and exporter of Ferro Silicon.

Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.

Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.

Titanium dioxide is an important inorganic chemical pigment, the main component is titanium dioxide. The production process of titanium dioxide has two process routes: sulfuric acid method and chloride method. It has important applications in coatings, inks, papermaking, plastics and rubber, chemical fiber, ceramics and other industries.

Silicon Dioxide, E551, CAS no.7631-86-9, white powder. Silicon dioxide (SiO2), also known as silica, is a natural compound made of two of the earth's most abundant materials: silicon (Si) and oxygen (O2). Silicon Dioxide is a common additive in the production of foods, where it is used primarily as a flow agent in powdered foods, or to absorb water in hygroscopic applications used in silica gel, control moisture levels to avoid prevent certain goods from going bad. It is often used in cheese, fat spreads, confectionery, dried vegetables, etc.

As an experienced Silicon Dioxide manufacturer and supplier, we has been supplying and exporting Silicon Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.

Silicon Dioxide Specification
Item Standard
Appearance White powder
Purity (SiO2, %) 96
Oil absorption (cm3/g) 2.0~ 3.0
Loss on drying (%) 4.0~ 8.0
Loss on ignition (%) 8.5
BET (m2/g) 170~ 240
pH (10% solution) 5.0~ 8.0
Sodium sulfate (as Na2SO4, %) 1.0
Arsenic (As) 3mg/kg
Lead (Pb) 5 mg/kg
Cadium (Cd) 1 mg/kg
Mercury (Hg) 1 mg/kg
Total heavy metals (as Pb) 20 mg/kg
Total plate count 500cfu/g
Salmonella spp./ 10g Negative
Escherichia coli/ 5g Negative

Silicon dioxide, often referred to as silica, is a naturally occurring compound composed of silicon and oxygen atoms (SiO2). It is one of the most abundant minerals on Earth and exists in various forms, including quartz, sand, and glass. Silicon dioxide is a versatile material with applications spanning multiple industries. In the electronics industry, it is used as an insulator and substrate in semiconductor devices. In construction, it is a key component in concrete and building materials. It is also employed in the production of glass, ceramics, and abrasives. Additionally, silicon dioxide has applications in the food and pharmaceutical industries as an anti-caking agent and flow aid. Its wide availability and diverse properties make silicon dioxide an indispensable material in numerous industrial and consumer applications.

S.N CAS No. Item
1 63148-62-9 Silicone oil
2 77-92-9 Citric acid
3 9003-05-8 Polyacrylamide
4 7664-39-3 Hydrogen fluoride
5 9000-11-7 Carboxymethyl cellulose
6 7757-82-6 Sodium sulfate
7 68-04-2 Sodium citrate
8 7664-38-2 Phosphoric acid
9 1310-73-2 Sodium hydroxide
10 497-19-8 Sodium carbonate
11 139-33-3 EDTA disodium
12 67-63-0 Isopropanol
13 25322-68-3 Polyethylene Glycol
14 144-55-8 Sodium bicarbonate
15 4404-43-7 Fluorescent Brightener 28
16 7758-29-4 Sodium tripolyphosphate
17 7601-54-9 Trisodium phosphate
18 532-32-1 Sodium benzoate
19 5329-14-6 Sulfamic acid
20 142-91-6 Isopropyl palmitate
21 7782-99-2 Sulfurous Acid
22 9014-01-1 Subtilisin (Compound proteinase)
23 1344-09-8 Sodium silicate
24 6834-92-0 Sodium metasilicate
25 7720-78-7 Ferrous sulfate

S.N CAS No. Item
1 100-21-0 Terephthalic acid
2 67763-03-5 Silsesquioxanes
3 9003-01-4 Acrylic acid
4 1333-86-4 Carbon black
5 80-62-6 Methyl methacrylate
6 61788-97-4 Haloperidol
7 75-38-7 1,1-difluoroethylene
8 100-42-5 Styrene
9 9002-84-0 Poly(tetrafluoroethylene)
10 124-04-9 Adipic acid
11 107-21-1 Ethylene glycol
12 126-30-7 Neopentyl glycol
13 85-44-9 Phthalic anhydride
14 106-89-8 Epichlorohydrin
15 9003-08-1 Amino resin
16 9006-03-5 Chlorinated rubber
17 13463-67-7 Titanium dioxide
18 12227-89-3 Iron Oxide Black
19 922-67-8 Methylpropiolate
20 538-24-9 Trilaurin
21 9011-05-6 Urea formaldehyde
22 79-41-4 Methacrylic acid
23 1314-13-2 Zinc oxide
24 80-05-7 Bisphenol A
25 121-91-5 Isophthalic acid

per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed.

Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves
Single use, non-sterile, no measuring, Latex free
Sizes: XS, M, L. XL. XXL
Color: Blue, Green
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface: Smooth
The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was
developed based on the vinyl glove production technology. Its material is
compounded with PVC paste and Nitrile latex, so the finished production has
the advantage of both PVC and Nitrile gloves.
Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better
satisfy the users demands, it feels softer, more flexible and more
comfortable when wearing.
Intended purpose: The examination glove is disposable non-sterile device
intended for medical purpose that is worn on the examinerâ??s hand or finger
to prevent contamination between patient and examiner.

Medical Device Quality Management System EN ISO 13485 Certificate,
ISO 9001 Quality Management System Certificate - 2 FDA
FDA Registration Information - 510K
Product 510K
Biocompatibility Test Report
EU CE Certificate (DOC, Technical Documentation Review Report
)

CAS 14808-60-7
Appearance Colorless transparent solid
Melting Point 1723
boiling point 2230
Water Solubility Insoluble
Density 2.2 g/cm

Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container

Micro Silica Sand:

Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.

Applications :

Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.

Advantages :

Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.

Silicon Dioxide

SiO2
Potential Functions:

Beverages
Cosmetics & Pharmaceuticals
Food
Industrial & General

Potential Functions:

Anti Caking Agent
Colourant
Defoamer

Potential Applications:
Cleaning Chemicals Non-Alcoholic Drinks Skin Care
Dairy Personal Care Snack Foods
Health Care Ready Meals Water Treatment
Paints Seasonings

We are exporter of Arabic Gum Or (Acacia Gum).

Organic Gum Arabic (Acacia) is an emulsifier for flavor oils and essential oils, making them stable in water-based compounds. A 30/70 ratio of gum to water is recommended as the best starting point for a Gum Arabic solution. It can be mixed at a 6/1 ratio of gum to oil. It can be used in cosmetics, baking, and as a fiber supplement. Organic Gum Arabic (Acacia) is vegan, kosher, and gluten-free. The Sudanese Organic Gum Arabic Acacia Senegal Heshab is the best in quality all over the world.

The fruit can be up to 30cm long and about 15cm wide, weighing 1-3 kg. The durian meat is light yellow in color. Durian is widely used in many tropical regions around the world, especially in Southeast Asia such as Vietnam, Thailand, Malaysia and Indonesia. Durian is a very nutritious fruit rich in vitamins and fiber, along with healthy plant compounds. In 243 grams of durian will provide:
Calories: 357 Fat: 13 grams Vitamin C: 80% Manganese: 39% Niacin: 13%
Fiber: 9 grams Protein: 4 grams Thiamine: 61% Riboflavin: 29% Copper: 25%
Carb: 66 grams Vitamin B6: 38% Potassium: 30% Folate: 22% Magnesium: 18%

PET Airbag scrap with silicon

MATERIAL : PET Airbag scrap with silicon
CATEGORY : PET
TYPE : Airbag
SPECIFICATION : 2 full container available
Origin : Tunisia
LOADING WEIGHT : 19 Ton
FOB (USD/Ton) : 450$ - 550$
Packaging : Jumbo Bag
Est. Shipping Time 15, 30, 45 days

Titanium dioxide is a white, odorless, and naturally occurring mineral compound that finds extensive use in various industries. It is most notably recognized as a white pigment in paints, coatings, plastics, and cosmetics due to its exceptional opacity and brightness. Titanium dioxide serves as an effective UV blocker in sunscreens, protecting the skin from harmful ultraviolet rays. In addition to its role in pigmentation and UV protection, it is employed as a catalyst in the chemical industry, and as a strengthening and opacifying agent in the food industry for items like confectionery, sauces, and toothpaste. Its versatility and ability to enhance color, protection, and strength make titanium dioxide an indispensable component in a wide range of everyday products.

SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.

Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.

1,Hight prurity (99.99% min) Metal Antimony (Sb)

2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999%
3,Lumps/Ingot/Granule/Bar
4,Color: Gray

5,Atomic weight: 121.760

6,Electronegativity: 2.05

7,CAS No.: 7440-36-0

8,Density: 6.697 g/cm3 (25â??)

9,Melting Point: 630.63 â??

10,Boiling Point: 1587 â??

11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.