Please click here to check who's online and chat with them.

Find Verified Quick 861X Bga Desoldering Rework Station Suppliers, Manufacturers and Wholesalers

May-15-23
Supplier From Shenzhen, China
 
Quick 861X 1300W Soldering Rework Station Quick Hot air gun Flagship Edition Hardcover Edition,Quick 861X Intelligent Digital Display 1300W High Power Heat Gun Rework Hot Air Gun Desoldering Station Soldering Station.

Features:
With CH1, CH2, CH3 three working channels, and each channel can be set to the amount of wind, and temperature.
Password protection and key lock function.
Facilitate real-time operation, with magnetic switch control lever is placed in the handle holder immediately into hibernation.
With automatic sleep function, in a dormant state parameters can be set.
Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly, easily and precisely adjust the temperature stable, free from the influence of wind.
The use of brushless vortex blower, air flow adjustable, wide range, can be adapted to a variety of uses.
The system has an automatic cooling function of wind capacity, extend the life of the heating element and protect the hot air handle.
ADB black, leading, the trend, 1300W high power, air volume 2-200 level.
Real-time operation is convenient with magnetic control switch control, put the handle on the handle stand and sleep immediately.
3 standard air nozzles with different specifications.
Temperature-locked channel, according to different job requirements, three different working modes can be set.
Real-time operation is convenient with magnetic control switch control, convenient temperature adjustment.
May-03-12

Bga Rework Station

$630
MOQ: Not Specified
Supplier From Tai'an, Shandong, China
 
1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat, easy to cut through, heat proportion piercing tradition weld machine with sirocco.
3. Easily operate. Just need one day training. Can operation this machine.
4. Don't need weld tools. This machine can weld all the component of 35-50cm.
5. This machine has 800W heating system. Widely 240x180mm.
GOLD Member
Nov-20-21

Oxygen Cylinder

$230
MOQ: 100  Pieces
Sample Available
 
Quick Details
Pressure : High
Place of Origin : Hubei, China
Model Number : 20Mpa-356(7.7)mm-150L CNG Compressed Natural Gas
Material : Steel, 34CrMo4 Steel
Brand Name : SINOGES or OEM Branded
Use : Vehicle Mother Station Transport
Application : Vehicle Mother Station Transport
Working pressure : 20 MPa | 200 Bar | 2901 psi
Test Pressure : 37.5 MPa | 375 Bar | 5439 psi
Outer Diameter : 356 mm | 14 inch
Wall Thickness : 7.7 mm | 0.3 inch
Water capacity : 150 L | 9154 in3
Cylinder Height : 1851 mm | 72.9 inch
Cylinder Weight : 141.1 kg | 311 lb
Certification : ISO 9809-1 TPED
Supply Ability
Supply Ability : 2646 Piece/Pieces per Week
Packaging & Delivery
Packaging Details : Wood Pallet Packing
Port : Shanghai
Picture Example : package-imgpackage-img
Lead Time:
Quantity(Pieces) 1 - 1 2 - 378 379 - 1134 >1134
Est. Time(days) 15 35 45 To be negotiated
Jul-27-15
 
Feature:
1.3 independent heating system
ZM-R6200 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking period, you can use software to choose freely or use top heater or bottom heater depart, and combine freely with top and bottom heatercapacity, to make it easies for rework double BGA, CCGA, QFN, CSP, LGA, SMD etc. External sensor socket is precise detected temperature to analyze and proof on actual temperature curve of BGA at the same time.
2.Precise optical alignment system
with optical alignment system and clear images, components can enlarge up to Maximum 230 times, mounting accuracy within +/-0.01mm, with a beam split, zoom in, zoom out and micro-adjust functions, adopted 12HD monitor.
3.Multi-function operation system
With touch screen interface, k-type thermocouple, close-loop control, and intelligent temperature compensation with automatically system, integrated design of top heater and sucker point. It can auto identify a high degree of suction and mounting. With automatic soldering and desoldering function. the temperature can be set to 6 segment and 6 segment constant temperature control, N groups of storage temperature setting parameters according to kinds of BGA chip set.
4.Superior safety functions
After finish desoldering and soldering, there is alarming, when temperature goes out of control, the circuit will automatically power off, it is of double excess temperature protection function. Temperature parameter has a password to avoid arbitrary changes, with superior safe protection functions, can protect PCB, components and the machine from damage at any abnormal situation

Specification parameters
1 Total power 5100W Max
2 Top heater power 1200W 1st heater¡
3 Bottom heater power 1200W 2nd heater
4 3rd IR heater 2700W (independent controlling left and right IR heaters)
5 power AC 220V;¨¤10 50/60Hz
6 Electrical materials temperature control system Adopted Dalian University of Technology
7 Dimensions 640¢630900mm
8 Temperature control K-type thermocouple (Closed Loop),
9 Positioning V type groove;with universal fixture
9 P C B size Max 410 370mm¡; Min65 65mm
10 Available BGA chip 11- 80 80mm
11 External temperature sensor 1piece
12 Net weight 65kg


Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Jul-16-15
 
Main features

1.Embedded industrial control computer,windows system. Adopt high definition human-machine interface, PLC control, there is password protection and modify function, can show 4-6 temperature curves and store multiple sets of data, with instant curves analysis function, and analyzing and correct BGA temperature at any time;
2.For guarantee the heating effect and mounting precision, control independently the top heater and mounting heat ,adopted linear slide make X,Y,Z axis can do micro adjustment and rapid positioning;after mounted, no need to move the PCB board in the bottom area, it can heat directly when move the top heater, avoid the moving of bga placement when move the PCB. Ensured the mounting accuracy and welding effect.
3.top and bottom heaters are hot-air heating, the third IR heater is infrared heating, the top and bottom heaters can heat PCB from upper and bottom at the same time, three heaters control independently. Show the heat time, temperature, and curves act, on the touch screen.
4.choose high accurate K type close-loop thermocouple, and PID parameters automatic adjustment system control temperature precisely through PLC and temperature module, keep the temperature deviation at 2 degree.external temperature measuring interface check temperature precisely, achieve accurate analysis and collate the actual temperature curve.
5.V-groove PCB support, with rapid, convenient and accurate positioning, can fit for all kinds of PCB board.
6.Flexible and removable universal fixture the operator and the protective effects and no damage to the PCB board suitable for all kinds of sizes of BGA repair.
7.Adopted all kinds of BGA nozzles, with 360,227; rotation, easy for installation and replacement, customized is available;
8.Adopt adjustable CCD color optical system, with a beam split, zoom in, zoom out and micro-adjust functions, has automatic chromatism resolution and brightness adjustment system, can adjust the clearness of the image by hand or automatic.
9.The X, Y axis and R angle with micrometer adjust; alignment accuracy is within0.01mm, with high definition HD monitor, avoiding human operation errors completely.
10.There are 8 segments rising temperature and 8 constant temperatures, can store millions of temperature curves, curve analyze, set and modify on the touch screen.
11.With voice control ãalarm in advance .À function, 5-10 seconds before finished soldering and desoldering alarm the operators with voice control to prepare the related works. Powerful cross-flow fan cool the PCB board fast by hand or automatic after desoldering and soldering, it can prevent the PCB board from deformation, ensure the welding effect.
12.With vacuum pump,|¦Ìangle 60 rotation, micrometer precise adjust mounting and nozzle, need no air source.
13.With CE certification, there is emergency stop switch and automatic cut off protective device when abnormal situation happen.

Specifications and technical parameters:
1 Total Power-4850W
2 Top heater-800W
3 Bottom heate-The second heat area 1200w, the third heat area 2700w (plus size area to suit any kinds of PCB board)
4 Power-AC220V 50/60Hz
5 Dimensions-L790W640H800 mm
6 Positioning-V-groove, PCB support can X,Y axis adjust at any direction, additional with universal fixture
7 Temperature control-K Sensor, Closed loop
8 Temperature accuracy-2 degree
9 PCB size-Max 370 x 410mm Min 22 x 22mm
10 Work bench fine-tuning-front and back 15mm, right and left 15mm
11 Camera magnification10x-100x times
12 BGA chip2*2-80*80mm
13 Minimum chip spacing-0.15mm
14 External Temperature Sensor1-5 pieces available to choose, optional
15 Placement Accuracy-0.01MM
16 Net weight-93kg


Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
539 Quick 861X Bga Desoldering Rework Station Suppliers
Short on time? Let Quick 861X Bga Desoldering Rework Station sellers contact you.
Jul-16-15
 
Feature:
1.3 independent heating system
ZM-R6200 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking period, you can use software to choose freely or use top heater or bottom heater depart, and combine freely with top and bottom heatercapacity, to make it easies for rework double BGA, CCGA, QFN, CSP, LGA, SMD etc. External sensor socket is precise detected temperature to analyze and proof on actual temperature curve of BGA at the same time.
2.Precise optical alignment system
with optical alignment system and clear images, components can enlarge up to Maximum 230 times, mounting accuracy within +/-0.01mm, with a beam split, zoom in, zoom out and micro-adjust functions, adopted 12 HD monitor.
3.Multi-function operation system
With touch screen interface, k-type thermocouple, close-loop control, and intelligent temperature compensation with automatically system, integrated design of top heater and sucker point. It can auto identify a high degree of suction and mounting. With automatic soldering and desoldering function. the temperature can be set to 6 segment and 6 segment constant temperature control, N groups of storage temperature setting parameters according to kinds of BGA chip set.
4.Superior safety functions
After finish desoldering and soldering, there is alarming, when temperature goes out of control, the circuit will automatically power off, it is of double excess temperature protection function. Temperature parameter has a password to avoid arbitrary changes, with superior safe protection functions, can protect PCB, components and the machine from damage at any abnormal situation
Specification parameters
1 Total power- 5100W Max
2 Top heater power- 1200W ¡ê¡§1st heater
3 Bottom heater power -1200W ¡ê¡§2nd heater
4 3rd IR heater- 2700W (independent controlling left and right IR heaters)
5 power-AC 220V10- 50/60Hz
6 Electrical materials temperature control system Adopted Dalian University of Technology
7 Dimensions- 640,630,900mm
8 Temperature control K-type thermocouple (Closed Loop),
9 Positioning V type groove;with universal fixture
9 P C B size- Max 410 mm Min65mm
10 Available BGA chip-180mm
11 External temperature sensor1piece
12 Net weight- 65kg


Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Jan-17-13
 
ZM-R 5860 specifications

1 Total Power 4800W
2 Top heater 800W
3 Bottom heater 2nd heater 1200W 3rd IR heater 2700W
4 Power supply AC220V 50/60Hz
5 Machine dimension L635*W600*H560
6 Positioning V-groove, PCB support can be adjusted in any direction with external universal fixture
7 Temperature control (K Sensor) closed loop, independent heating, precision within
8 PCB size Max 410 370mm Min 20 20 mm
9 Electrical selection Highly sensitive temperature control module£«Touch screen (Taiwan)+Delta PLC
10 Weight 40kg
11 Package Wooden Box
12 G.W. 78KG
13 Package dimension L78*W78*H77cm.


Main Features
1.Adopt liner slide which makes X¡¢Y¡¢Z axis all can do high positioning accuracy and fast maneuverability.
2. PCL control, can save 50 groups profile and analyze instant temperatures curves, equipped with password protection and modify function. The temperature curves can be show on the touch screen. Instantly set and analyze temperature parameter according with repairment need.
3. There are 3 independent heating areas, the 1st and 2nd hot-air heaters, can be set many temperatures parameters and sections at the same time. The 3rd IR preheating, prevent the PCB motherboard cracking, and can be adjusted the power comsumption.Top heater can be adjusted freely; second heater can be adjusted up and down.
The machine operations be runned by human machine interface- high definition touch screen (Taiwan)
4. Offer all kinds of hot-air nozzle, it can rotate 360, with magnet, easy to install and change, and offer customized service.
5. Choose imported high-precision K-type thermocouple, closed loop control and automatic temperature compensation system, combined PLC module for the precision control of temperature. Temperature controlled within ¡¾3 ¡Æ.
6. Use a V-groove flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled, and it can rework for any BGA package size.
7. Powerful cross-flow fan rapidly cool the PCB board, built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly.
8 There is an alarming after desoldering & soldering, and it is settled alarming in advance.
9. CE certificate, with emergency stop and Automatic power-off protection device when abnormal accident happens.
10. It can save many temperature parameters, easy to repair same chips. And can repair lead or lead free chips, can meet repairment of laptop, xbox360, mobile, ps3 and other components on the motherboard.


wooden box, G.W. is 78KG,package dimension is L78*W76*H77cm.
Mar-01-23
 
PHONEFIX Heating Station + 3 kinds Motherboard Heating groove:
120X-MAX ( 3-IN-1 ) for phone X / XS / XS MAX Double Layers Board Pre-heating Rework Station
120C - for phone 5 6 7 8 motherboard Desoldering Rework Station
120CC - phones motherboard Desoldering pre-Heating Rework Station

Feature:
Brand: PHONEFIX
Voltage: 110V / 220V
Demolition shield temperature adjustment 180â??-220â??
In addition to CPU side glue temperature 180â??-220â??
Demolition A8 A9 A10 A11CPU the temperature 230â??-240â??
Desmearing temperature 180â??-200â??
Reball BGA chip temperature 180â??-200â??
Soldering A8 A9 A10 A11 CPU temperature 190â??-210â??

phone 6 6S 7 8 / X XS MAX Double Layers Board Pre-heating Desoldering Rework Station, adopt special heating design and precise temperature control capability, which will locate accurately locate the needed heating part. Using high purity copper to guarantee heat transfer, which is not easy for deformed, durable and anti-wear
Dec-28-22
 
SUGON 2020D 700W lead-free hot air gun soldering station for mobile phone desoldering repair, 110/220V heat gun soldering rework station for phone PCB SMD chip repair

Product Features :
Sensors, closed circuit, the zero passage trigger temperature control of the microcomputer, LED display, big power, heating is rapid, accurate and stable temperature, not affected by the air volume, truly lead-free desoldering.
Adjustable air flow, air volume big and soft wind, temperature control is convenient, can be suitable for a variety of purposes.
The handle is equipped with induction switch, as long as the hand shake hands handle, the system can quickly enter the working mode; Handle is released into the handle frame, the system will enter the standby mode, easy to operate in real time.
The system is equipped with automatic air cooling function, can prolong the life of heating element and protect the heat gun.
Adopts brushless fan very long life, small noise, using high quality heating element under the same power efficiency can be doubled, and can effectively prolong the working life of the heating element and power saving.
The machine is equipped with safety protection function.
Celsius and Fahrenheit temperature conversion.
Calibration temperature function
If the heating element is replaced, the temperature must be recalibrated. This machine uses.
Use digital temperature calibration method to correct the incremental key input, easy and quick to adjust.

Applicable Usage :
Desoldering is suitable for a variety of components, such as: SOIC, CHIP, QFP, PLCC, BGA ( especially suitable for mobile phone line and row line of desoldering ); Used for heat shrinkable, drying, in addition to the paint, in addition to the glue, thawing, preheating, welding, etc.

Product Parameter
Model: 2020D
Category: LED microcomputer digital display
Power consumption: 700W
Airflow type: brushless fan soft wind
Gas flow rate: 100 litres/minute.
Handle component length: 120cm
Noise: less than 45 db

Package List :
1pcs x SUGON 2020D
1pcs x Power Cable
1pcs x Handle
2pcs x Cyclone nozzle (7mm,9mm)
3pcs x Straight nozzle (4mm,7mm,9mm)
1pcs x Manual
Dec-22-22
 
hot air rework desoldering station is a professional phone repair rework station, desoldering and soldering of BGA IC components, 1000W 500 C QUICK 861DW lead free rework station for mobile phone BGA desoldering repair.

Hot Air Rework Station Lead Free Soldering Station For BGA IC Components Welding.

220V or 110V option voltage. Note: 110V, need customized, time: about 1-2 days.

With 3pcs Heat Gun Nozzles - size : 5mm 6mm 8mm, if need 3mm 12mm nozzle, need bought it alone. More QUICK 861DW Nozzles

Features :
With CH1, CH2, CH3 three working channels, and each channel can be set to the amount of wind, and temperature.
Password protection and key lock function.
Facilitate real-time operation, with magnetic switch control lever is placed in the handle holder immediately into hibernation.
With automatic sleep function, in a dormant state parameters can be set.
Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly, easily and precisely adjust the temperature stable, free from the influence of wind.
The use of brushless vortex blower, air flow adjustable, wide range, can be adapted to a variety of uses.
The system has an automatic cooling function of wind capacity, extend the life of the heating element and protect the hot air handle.

Specification :
Power: 1000W
Voltage: AC 220V 110V
Temperature range: 100 C 500 C
Air volume ratio range: 1 to 120
Maximum air flow: 120L min
Dimensions: 188 (L) 245 (D) 135 (H) mm

Package List :
1pcs x Quick 861DW rework station
1pcs x Hot air gun
1pcs x Hot air gun holder
3pcs x Heat gun nozzles
1pcs x Ground lead
1pcs x Instructions
Jun-24-15
 
Features introduce
independent control heaters top and bottom heaters are hot-air heating, the third IR heater is infrared heating, the top and bottom heaters can heat PCB from upper and bottom at the same time. temperature accuracy within there are multi segments can be set at the same time; IR preheating area is adjustable according to desire requests, to make PCB heating evenly.
it can heat PCB board and bga chips at the same time. And the third IR heater can preheat the PCB board from bottom, to avoid PCB from deformation during repair process. The top and bottom heaters heat independently
choose high accurate K type close-loop thermocouple, and PID parameters automatic adjustment system it can show seven temperature curves and the millions of groups data can be saved through U storage device with instant curves analysis function and analyzing BGA temperature at any time; the sensor is for precise temperature testing.
Precise optical alignment system
Adopt adjustable CCD color optical system, with a beam split, zoom in, zoom out and micro-adjust functions, has automatic chromatism resolution and brightness adjustment system, amplify to 230 X, mounting accuracy within 0.01mm.

InMulti-function operation system
Ù Adopt high definition human-machine interface, available for setting ¡°set up¡± and ¡°operate¡± to avoid error settings, The top heater device and mounting head 2 in 1 design, with automatic identify BGA chips and mounting height, it is of automatic soldering and desoldering function.it can set 6 segments rising temperature and 6 segments activity temperature, and can save N groups temperature profiles. Adopted all kinds of BGA nozzles, with 360 rotation, easy for installation and replacement, customized is available;
ÚV-groove PCB support, with rapid, convenient and accurate positioning, can fit for all kinds of PCB board; Flexible and removable universal fixture has protective effects and no damage to the PCB board, suitable for all kinds of sizes of BGA repair.

Superior safety functions
With CE certification; after desoldering and soldering, there is alarming. when temperature goes out of control the circuit will automatically power off, it is of double over-temperature protection function. Temperature parameter has a password to avoid from arbitrary changes, with superior safety protection functions, can protect PCB board components and the machine from damage at any abnormal situation

Specifications and technical parameters
Total power 5300W Max
Top heater power 1200W (1st heater)
Bottom heater power 1200W (2nd heater)
3rd IR heater 2700W independent controlling left and right IR heaters)
power AC 220VA10 50/60Hz
Electrical materials temperature control system Adopted Dalian University of Technology
Dimensions L640*W630*H900mm
Temperature control K-type thermocouple (Closed Loop), intelligent temperature compensation system
Positioning V type groove, with universal fixture
P C B size Max 410A370mm, Min65A65mm



Wooden box
Jul-27-15
 
Features
1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired
2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair.
3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting.
4 Optical alignment is controlled electrically, can rotate automatically
5 Mounting head built-in pressure testing device, to protect the PCB
6 Built-in infrared laser positioning, fast positioning for PCB.
7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running
8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow.
9 Bottom heater up and down manually, can adjust the heating height real time.
10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life
11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation.
12 High resolution touch screen, which is up to 800*600 pixel
13 Adopt joystick control for alignment system, no need setting complicated parameters
14 Adopt Delta double ball bearing flow fan for air supply¡ê;no need external air source
15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment
16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically.
Specifications
Total Power Max 5300W
Power AC 220V10% 50/60 Hz
Top heater power 1200W
Bottom heater power 1200W
IR power 2700W
Hot air temp. 400 230; (Max)
Preheating temp. 400
Positioning V-groove +laser positioning + universal fixture
PCB size Max 410 370 mm
Preheaing size 370mm 270mm
Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads
Chip size Max 80¨80mm Min 22 mm
Dimensions L640 W630 H900 mm
Temperature sensor 1 piece
Net weight 70kg


Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Jul-16-15
 
Features
1 Suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired
2 Suitable for LED lamp beads of tape packaging and bulk materials, also any BGA and components which are difficult to repair.
3 High solution optical alignment system, accurate LED components positioning, ensure precise mounting.
4 Optical alignment is controlled electrically, can rotate automatically
5 Mounting head built-in pressure testing device, to protect the PCB
6 Built-in infrared laser positioning, fast positioning for PCB.
7 Adopt HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running
8 Adopt up and down alignment for top and bottom heater, heating for appointed local zone, prevent PCB to turn yellow.
9 Bottom heater up and down manually, can adjust the heating height real time.
10 Adopt ceramics infrared radiator for IR heater, heating stably and uniformly with long serve life
11 Human-machine interface has multiple operation mode and permission, welding, and mounting manually, easy operation.
12 High resolution touch screen, which is up to 800*600 pixel
13 Adopt joystick control for alignment system, no need setting complicated parameters
14 Adopt Delta double ball bearing flow fan for air supply no need external air source
15 Adopt DCCE 6 channel module for temperature control system, automatic PID adjustment
16 Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC,which will close output channel and display fault condition. Protect itself automatically.
Specifications
Total Power Max 5300W
Power AC 220V10% 50/60 Hz
Top heater power 1200W
Bottom heater power 1200W
IR power 2700W
Hot air temp. 400(Max)
Preheating temp. 400Max
Positioning V-groove +laser positioning + universal fixture
PCB size Max 410 ,370 mm
Preheaing size 370mm,270mm
Chip type BGA,QGN,CSP,POP,QFN, Micro SMD,LED lamp beads
Chip size Max 80,80mm Min 22 mm
Dimensions L640 W630 ,H900 mm
Temperature sensor 1 piece
Net weight 70kg


Package Wooden box
Dimension :80*80*105cm
Gross weight: 120kg
Delivery time: 3-7 working days
Dec-30-22
 
QUICK 715 2 in 1 Double-station Intelligent Soldering Station for Phone Motherboard Welding Repair.

Features :
Adopt the latest design concept of QUICK
Quick 2008 air gun and 936A soldering iron combined
Large screen LCD display, thin and light, low power consumption, adjustable brightness
Independent control of temperature and air volume
Encoder adjustment, more intelligent
Digital temperature air volume calibration, more intuitive and convenient
Fast heating hot air gun, quality heat rises rapidly.
Vortex fan built into the handle, efficient heat collection, balanced airflow, long life.
Air gun noise reduction design, the wind is soft and even, low noise, no damage to components.
Fast heating iron, efficient heating, good tinning effect, long life.
Increase transformer, full power select circuit board anti-aging heat dissipation.
High temperature resistant flame retardant environmental protection material, artificial design
Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature
Small size and strong performance,Multi-purpose
Small temperature difference (plus or minus 5 degrees)

Menu :
Backlight on off
Temperature calibration of air gun soldering iron
Encoder on off

Parameter :
Product Name: 2 in 1 Soldering Station
Model: QUICK 715
Power: 760W
Voltage: 110V 220V 50Hz
Soldering Station Temperature: 100 480
Dec-26-22
 
QUICK 857DW+ lead free adjustable heat gun/hot air gun with helical wind soldering rework station, QUICK 857DW+ is an upgrade version of QUICK 857D SMD ESD soldering station, high efficiency heat dissipation to the heater soldering tip. Professional mobile cell phone repair tools: cheaper soldering iron and soldering station for proper mobile phone repairing.

QUICK 857DW+ Lead Free Rework Station SMD ESD Soldering Station (upgrade verson of 857DW)

Technical parameters :
Power Consumption: 580W
Air pump: DC motor, double turbine rotate out of the wind
Temperature control: 100 to 450 degrees
Gas flow rate: 100 litres/minute
Component length: 110cm
Size: 17 x 10.5 x 24 cm

Product Features :
Linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
Express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color.
BGA chip is not easy to break.

Product Usage :
Suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
Used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.

Package List :
1pcs x Heat gun Quick 857DW
2pcs x Tweezers
Dec-22-22
 
Quick TR1300A hot air soldering station is an professional intelligent soldering rework station for mobile phone motherboard repair, 1300W Quick TR1300A intelligent hot air soldering station with touch control temperature alarm password lock function multipoint temperature digital calibration for phone PCB soldering repair.

QUICK TR1300A Intelligent Hot Air Station Mobile Phone Soldering Repair. Come with 3pcs: Heat Gun Nozzles 5mm 6mm 8mm, if need 3mm 12mm Nozzle, need bought it alone. More QUICK 861DW TR1300A Nozzles from: VC979.

General Specification:
Power: 1300W
Voltage: 110V 220V for choose
Temperature range: 100 C~500 C 212 F-932 F
Temperature stability: 2 C
Air volume: 6 70L / Min
Airflow: 1 100m3/h

Description :
Host and duct design separately
Ultra-high power 1300W
You can preset the process parameters of the three channels
With temperature alarm function
The use of brushless vortex fan, air flow adjustable, a large range
Can be on the temperature, air volume, time and other parameters set

Mulit-point temperature digital calibration, temperature locked by password.

Parameters of three channels pre-set memory.
Temperature alarm function, C and F interchangeable.
Twin-stag brishless blower pump for stable airflow, long life.
Temperature, airflow, working time and other parameters can be set.
Slient design of the rework station, with noise lower than 55dB.
Plug-in design of ceramic heating element for stable temperature, long life and easy maintenance.
ESD design, ESD testing function.
Can be controlled via PC

QUICK TR1300A 1300W Intelligent Hot Air Soldering Station

Features :

Multipoint temperature digital calibration,Password lock function.
Can preset technological parameter of three gallery, more practical.
Temperature alarm function, temperature changer.
Adopt two-stage supercharging brushless pump, air pressure stability, long life.
Set the parameters such as temperature, air velocity and time.
Ceramic heating element, plug type design.
De-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Suitable to hot shrink, drying, remove lacquer and viscosity, thaw, preheating, disinfect and so on.
Suitable to the situation with different grade airflow.
Suitable to the hot air lead free de-soldering.
Mar-23-23
 
WDS-700 BGA Rework Station are widely used to replace and repair the BGA chip in laptop, mobile phone, The main user is repairing shops and factory to provide the after-sales service and rework.

How to separate BGA chip from motherboard / How to replace a new BGA chip

Repair steps
1.Separate the BGA chip from mother board -we called desoldering
2.Clean Pad
3.Reballing or replace a new BGA chip directly
4.lignment/Positioning -Depend on experience ,silk frame ,optical camera
5.replace a new BGA chip - we called Soldering
Jan-05-23
 
Atten ST-2090D 80W Thermostatic Digital Rapid Heating Welding Rework Station Soldering Iron Kit with Soldering Wire Holder, ATTEN ST-2090D Multi-function Digital Thermostatic 80W Lead-free Original Soldering Station for Cellphone BGA SMD PCB IC Repair.

Features:
Max Power of 80 W, soldering iron 28 V AC
Temperature read out in MCU controlled temperature calibration.
Soldering station with solder wire stand.
Auto-standby, Auto-shutdown function are available.
Heating wire and sensor use PTC materials.
Soldering tip designed separate from heater and using common T900 series to save use-cost.
Very fast heating: from room temperature to 350 C only approx. 15 s
Soldering iron with flexible connection cable
Adjustable temperature range 80 - 480 C

Specification:
Model: ST-2090D
Power consumption: 80W
Input voltage: AC 220V
Output voltage: AC 24V
Display method: LED
Temperature range: 80~480 (176 896)
Temperature offset range: 50 (90)
Temperature stability: 2 at idle temperature
Tip to ground resistance:
Dec-28-22
 
Phone PCB Repair Metal Shelving Bracket for Soldering Station external fixator

Air gun on the shelf can be rotated 360 degree, easy operate. Height can be adjusted within a range of convenience.

scientific design, operation Circuit boards with arbitrarily placed in the bottom range, arbitrary. Plate using metal,

sturdy and beautiful.Is the perfect companion for hot air gun.

picture show :
Phone repair Air gun on the shelf can be rotated 360 degree, easy operate. Height can be adjusted within a range of convenience. Scientific design, operation Circuit boards with arbitrarily placed in the bottom range, arbitrary.
Plate using metal, sturdy and beautiful.Is the perfect companion for hot air gun
Nov-15-17
 
WDS-750 higher automatic bga rework station
https://youtu.be/5fbCW4nN3w4

Features of WDS-750
1.touch screen interface,heating time,heating temp,temp rise speed,cooling time,alarm advance,vacuum time are set up inside the touch screen,easy to use;
2.Panasonic PLC, independent control temperature control module,shows 3 temp curves all the time,4 independent sensors,check the temp accurately for the chip points,ensure the weld yield.
3.3 independent heating zones,each heating zone can set up the heating temp,heating time,temp rise rate;Six period of heating temperature, simulate the reflow heating mode,set up as Preheating, keeping, heating, welding, welding, cooling;
4.auto feed chip,auto pick up chip,auto belowing chip,can identify the central position automatically when optical alignment;
5.multifunction mode choice, four modes as weld,remove,mount,manual,automatic and semi-auto function,meet the various needs of the users;
6.Uses the high precision K-type thermocouple closed-loop control which is imported from USA,with the unique heating method,ensure the weld temp precision control within ±1 â??
7.Uses imported optical alignment system,500 pixel HD camera,HDMMI HD signal output,15 inch HD LCD,high accurate micrometer X/Y/Z axis adjustment,ensure the location precision within 0.01-0.02mm;
8.The upper heating head and placement head are designed 2 in 1,different size of heating nozzles are provided,easy to remove and install,can be customized,meet the more requirement for users.
9.High automation and precision to avoid artificial error fully,can make the best repairing effect for the lead free technology,double-deck BGA,QFN,QFP,capacitance resistance and other components and parts.
10.Equipped the extra camera to obverse the solder ball melting,to ensure the temp curve and weld effect(this function is optional).

WDS-750 parameter
Total power:6800W
Upper heating power:1200W
Bottom heating power:1200W
Bottom IR heating power:4200W2400W is controlled
Power supply:(Single Phase) AC 220V±10 50Hz
Location way :Optical camera+ V-shape card slot + laser position for fast location
Temperature control:High precision K sensor closed loop control,independent temperature control with ±1 â?? precision
Appliance selection:High sensitive touch screen + temperature control mode +Panasonic PLC +step driver
Max. PCB size:500Ã?450mm
Min. PCB size:10Ã?10mm
Sensor:4units
Chip amplification multiple:2-30X
PCB thickness:0.5-8mm
Chip size :0.3*0.6mm-8cm
Min. chip space:0.15mm
Max. mount loading:500G
Mount precision:±0.01mm
Overall size :L670Ã?W780Ã?H850mm
Optical camera:Can be removed front and back,left and right,prevent the dead angle
Machine weight :90kg
539 Quick 861X Bga Desoldering Rework Station Suppliers
Short on time? Let Quick 861X Bga Desoldering Rework Station sellers contact you.
Explore Quick 861X Bga Desoldering Rework Station related import export discussions