PVC insulated electric cable not only has excellent electric, mechanical properties, but also has powerful resistance against heat aging, environmental stress and chemical corrosion. Its structure is simple and convenient to use and can be laid with no restriction of different elevation.The permissible maximum operating temperature is 90. Our XLPE cable can be produced according to our company standard which is equivalent IEC60502. We can design and manufacture special XLPE cable according to the required by the customers
Executive standard
1)GB/T12706.1-2002(Equivalent IEC 60502)
Rated voltage 1kv (Um=1.2kv)and power cable
2)GB/T12706.2-2002(Eqquivalent IEC60502-2)Rated voltage6 kvUm=7.2kv and Um=36kv power cable
3)G/BT12706.3(Voltage Grade Overtep IEC 60502-2) Rated Voltage3.5V Um=40.5kv and power cable.
Working conditions:
1) This maximum working temperature of thr conductor temperature is +90.
During having a short (lasting less than 5 seconds )the maximum temperature of the cable conductor shall not be above +250
Environment temperature should be no lower than+0 for laying the cable.
2) Bending radius allowance of the cable:
Single core cable:No steel tape cable 20D,steel tape cable 15D
Cores cable: No steel tape cable 15D steel tape cable 12D
Notes: D practical external diameter of cable.
Product Standard
GB/T 12706-2008 standard equivalent to IEC502(2004).
Usage
This product is suitable for use in rated AC voltage(U0/U) 0.6 / 1.0 KV and below transmitting and distributing circuit .
Property for Use
a. Allowed maximum work temperature is 70 â?? , for short circuit(5s), conductor maximum temperature is 160 â?? .
b. While laying cable, the environmental temperature should not be less than 0 â?? , for bend radius , should be not less than 10 times of cable overall diameter.
Note: Huiyou Cable supply PVC Insulated Power Cable, which include HV power cable and 1.0kv Power Cable . Our products have high quality and competitive prices. By the way, Our factory can produce refractory 90 â?? and 120 â?? power cable
1.Conductor
Plain annealed copper or aluminum
2.Insulation
General purpose PVC compound
3.Colour of cores
Single core - red or black
2 cores - red and black
3 cores - red, yellow and blue
4 cores - red, yellow, blue and black
4. Formation
1) Single core
2) 2,3, or 4 cores - stranded together and the interstices may be filled with the sheathing compound or textile. A nonhygroscopic binder tape may be applied over the laid-up cores.
5.Bedding
Black general purpose PVC compound
6.Armour
Single core - Aluminum wire
2,3, or 4 cores - Galvanized steel wire
7.Sheath
Black general purpose PVC compound
1.Conductor
Plain annealed copper or aluminum
2.Insulation
General purpose pvc compound
3.Colour of cores
Single core - red or black
2 cores - red and black
3 cores - red, yellow and blue
4 cores - red, yellow, blue and black
4. Formation
1) single core
2) 2, 3, or 4 cores - stranded together and the interstices may be filled with the sheathing compound or textile. A nonhygroscopic binder tape may be applied over the laid-up cores.
5.Bedding
Black general purpose pvc compound
6.Armour
Single core - aluminum wire
2, 3, or 4 cores - galvanized steel wire
7.Sheath
Black general purpose pvc compound
Capacity:2000km/month
Light weight
High flexibility enables perfect bending properties
Resistance to temperature
Resistance to adverse
Environmental situations and low cost .
Standard: iec60502-1 , vde 0276-603, icea s-95-658 , as/nzs 5000.1
Voltage: 0.6/1kv
Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes and street lighting
Overall, where increased electrical and also mechanical protection are required. Those cables are installed in open air, in underground, in water, indoors and in cable ducts.
We offer Bharat Cab PVC Insulated Power Cable that are made as per IS: 1554 (Part I) up to 1.1 KV grade. The PVC Insulated Power Cable, we supply, is suitable for low-tension, fixed installation and are also used as control cables for process and manufacturing industries. The clients can avail the PVC Insulated Power Cable from us at the market leading price.
Features :
- Strong and made for easy handling.
- Resistant to water, moisture, oils and chemicals.
- PVC black compounds can resist ultraviolet degradation.
- Specially formulated PVC is flame retardant and reduces emission of halogens and smoke.
Suitable For : Continuous use between 30oC and 70oC and upto 85oC for Heat Resistant applications.
175643 Pvc Insulated Power Cable Suppliers
Short on time? Let Pvc Insulated Power Cable sellers contact you.
PVC Sheathed Power Cable is suitable for use in rated AC voltage (U0/U) 0.6/1.0Â KV circuit for transmitting and distributing electricity.
PRODUCT DETAILS
Property for Application
a. The allowed max. continuous work temperature for various types of cable conductor cores in 70â??, the max. temperature for short circuit ( 5s) , cable conductor should not exceed 160 â??.
b. The environmental temperature for laying cable should be not lower than 0 â?? and the cable bend radius should be not less than 10 times of overall cable diameter.
Our Five Core PVC Insulated Power Cable is suitable for use in rated AC voltage (U0/U) 0.6/1.0 KV circuit for transmitting and distributing electricity. and our PVC Sheathed Power Cable, 5 Core Power Cable is also hot selling now . Please call us at any time.
Name: copper conductor xlpe insulated steel wire armored power cablestandard: iec60502, bs, din, astm, gb12706-2008 standard.Voltage: up to 35kvconductor: copper or aluminum conductorinsulation: pvc or xlpecross section: based on client's requirementapplication: medium voltage power cable is used in fixed laying to distribute the electricity in the ac rated voltage 35kv and under 35kv transmission line.
Standard export wooden , wooden steel drums or according to the customers'requirements
PVC Insulated & Sheathed Power Cables
Standards: IEC60502, GB/T12706-2008
Application: It is suitable to be installed in duct, tray or direct burial, with rated voltage of U0/U (0.6/1KV) for transmitting electricity.
Service Conditions:
1. Regular nominal cross-sectional areas: 1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, 10 mm2, 16 mm2, 25 mm2, 35 mm2, 50 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2, 185 mm2, 240 mm2, 300 mm2, 400 mm2, 500 mm2, 630 mm2, 800 mm2, 1000 mm2, 1200 mm2
2. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.
Application :-
The Power Cables are used under ground as well as over head transmission of power in power plants, industries,
projects and all other electrical installations.
Features :-
Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated
with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner &
outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement.
Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC
Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core.
Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores.
Color Codes : 2 Core Cables - Red, Black
3 Core Cables - Red, Yellow & Blue
3 Core Cables - Red, Yellow, Blue & Black (for Neutral)
4 Core Cables - Red, Yellow, Blue & Black
5 Core Cables - Red, Yellow, Blue, Black & Grey
6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction
This cables are used as power distribution and transmission at rated voltage of 0.6/1kV.
Working temperature: max 70 degree centigrade
Short circuit: 5 seconds at max 160 degree centigrade
Models:
VV: Copper Core, PVC insulated and Sheathed Electric Cable
VLV: Aluminum Core, PVC insulated and Sheathed Electric Cable
VV22: Copper Core, PVC insulated, Steel tape armoured, PVC Sheathed Electric Cable
VLV22: Aluminum Core, PVC insulated, Steel tape armoured, PVC Sheathed Electric Cable
VV32: Copper Core, PVC insulated, Fine steel wire armoured, PVC Sheathed Electric Cable
VLV32: Copper Core, PVC insulated, Fine steel wire armoured, PVC Sheathed Electric Cable
VV42: Copper Core, PVC insulated, Heavy steel wire armoured, PVC Sheathed Electric Cable
VLV42: Aluminum Core, PVC insulated, Heavy steel wire armoured, PVC Sheathed Electric Cable
ZR-VV: Copper Core, PVC insulated and Sheathed, Flame retardant Electric Cable
ZR-VLV: Aluminum Core, PVC insulated and Sheathed, Flame retardant Electr ic Cable
Installation:
While installation, the temperature should not lower than 0 degrees Celsius, if the ambient temperature is lower than 0 degrees Celsius, the cable should be preheated.
The bending radius should not be smaller than 8 times of diameter of cable.
After installation, voltage withstand test for 15 minutes at 8.4kV direct current should be performed.
PVC Sheathed armoured power cable
The product not only has good electric capability, but also has good chemical stabilization, simple structure, easy to use, and the laying of cable do not be limited by the fall.
It is widely used at the transformer circuit which rated voltage is 6000V or under.
The product is produced against IEC60502 and IEC60331, and the product can be produced against the standard of BS, DIN, and the standard required by the clients.
1. The long-term permissible operation temperature of the conductor shall not be higher than 70.
2. The max temperature of the conductor of cable should less then 160 when short circuit. (less then 5 second).
3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0.
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardance.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently.
6. Rated voltage: 0.6/1kV, 3.6/6kV.
7. Number of cores: One, two, three, four, five.
As one of the leading Suppliers, we keep our quality in synchronization with our reputation and offer the best PVC Power Cables to the buyers. Only strict and different quality tests, we undertake, ensure the utmost quality of our products.
As one of the leading Suppliers, we keep our quality in synchronization with our reputation and offer the best PVC Power Cables to the buyers. Only strict and different quality tests, we undertake, ensure the utmost quality of our products.
Our FRLS - PVC Power / Control Cables are manufactured from the optimum quality raw materials to add maximum durability & unbeatable performance. Flame Retardance, Low Smoke Emission and Acid Gas Emission. Quality tested & approved by the competent authority.
We are ranked as a dominating Manufacturer, Supplier and Exporter of excellent LT PVC Power Control Cables. These are designed using modern technology and quality assured raw materials, which are procured from certified vendors of the arena in adherence with international parameters. Owing to their safety, high quality, prevention from accidental short circuit, zero supply interruptions, performance accuracy and protection against the worst conditions these LT PVC Power Control Cables provided by us are massively applauded and demanded among the masses.
Features:
Seamless performance
Dependability
Longer life
Comprehensive prices.
