Please click here to check who's online and chat with them.

Find Verified Ptfe Gaskets Suppliers, Manufacturers and Wholesalers

Mar-28-19

Ptfe Gasket

$100
MOQ: Not Specified
Supplier From Hengshui, Hebei, China
 
PTFE GASKET IDEAL GASKET SOLUTION FOR HIGHER BOLT LOADS EQUIPMENT.
PTFE Gasket is made of synthetic fluoropolymer of tetrafluoroethylene.

It has highly resistant to chemicals, solvents, caustics and acids, except for alkali metals and fluorine gas. In addition, PTFE also has a very low surface energy and conforms to FDA regulations.

PTFE gasket provides excellent sealing performance in corrosive environments.

It can be used as flange gasket in the chemical industry, machine and equipment industry and piping.

COMMON SPECIFICATIONS

Item Thickness (mm) Inner Diameter (mm) Outer Diameter (mm)
PG-01 0.820 22 47.5
PG-02 34 66.5
PG-03 43 76
PG-04 49 85.5
PG-05 61 104.5
PG-06 73 124
PG-07 273 339.5
PG-08 324 409.5
PG-09 407 514
PG-10 508 606.5
FEATURES

Excellent sealing at high temperatures and pressures.
Non-corrosive, non-wetting, non-contaminating and odourless.
Excellent electrical and thermal insulation in virgin PTFE form.
Excellent chemical and mechanical resistance.
Very low gas leakage (complies with German Fugitive Emission Regulation TA-Luft).
Minimized cold-flow and creep behaviour.
Ideal for aggressive chemicals.
Long service life.
Easy to handle and cut.
MATERIALS TYPES

Virgin Teflon gaskets. Virgin Teflon gaskets are produced directly from pure material. They are used in the majority of general applications due to the most cost-effective type of PTFE material and possessing the greatest physical and electrical insulation properties.
Filled Teflon gaskets. Filled Teflon gaskets are made from virgin PTFE material with an added substance to improve their sealing properties. The gaskets materials exhibit strong physical characteristics, the strength can be altered depending on the type of filler that is used to enhance the material.
Expanded Teflon gaskets. Expanded Teflon gaskets are produced through virgin PTFE being expanded in a manner that creats uniform tension strength across the material. This process results in a PTFE material that carries no structural weakness and more flexible. They also exhibit the unique chemical resistant properties of virgin PTFE due to the fact that no additives are added.
Three white virgin teflon gaskets on a ivory color background.
Virgin teflon gaskets

Some filled teflon gaskets with different sizes on a black background.
Filled teflon gaskets

Some expanded gaskets on a gray background.
Expanded teflon gaskets
Oct-23-12
 
Gaskets, shaft, special-shaped pieces

The shaped components are made of polymerization of PTFE resins, then it still need the double processing means or special production methods in order to achieve the precision.Thus they turned the Gaskets ,Shaft ,Special-shaped.

Products Application:
Application of -1800C to +2500C temperature under various corrosive medium in seals, tube parts, chemical corrosion resistant vessels, mechanical equipments wear down, lubrication materials, various frequency of insulating parts.

Filled Material reinforced:

1) Graphite filled, increase thermal conductivity, lubrication, abrasive resistance
2) Cooper powder filled, increase intensity, abrasive resistance
3) Glass fiber filled, increase hardness and intensity
4) Carbon fiber filled, to increase intensity

In addition, our company uses the existing machines to produce products according to customers¡¯ requirements of various components.
Aug-23-10
Supplier From Xiamen, Fujian, China
 
PTFE gasket.
Dec-30-08
 
Ptfe gasket
1) sealing gasket for pumps and pipes, etc.
2) all sizes are available
3) new molds can be made according to customers' requirements
4) high chemical properties
5) wide temperature range from -180ípc to +260ípc
6) has the lowest coefficient of friction of all the known solid materials
7) not aging
8) nonstick


All sizes available on customers' requests
Dec-19-08
 
Ptfe gasket

1) sealing gasket for pumps and pipes, etc.
2) all sizes are available
3) new molds can be made according to customers' requirements
4) high chemical properties
5) wide temperature range from -180ípc to +260ípc
6) has the lowest coefficient of friction of all the known solid materials
7) not aging
8) nonstick


All sizes are available on costomers' request
9290 Ptfe Gaskets Suppliers
Short on time? Let Ptfe Gaskets sellers contact you.
Dec-19-08
 
Ptfe gasket

1) sealing gasket for pumps and pipes, etc.
2) all sizes are available
3) new molds can be made according to customers' requirements
4) high chemical properties
5) wide temperature range from -180c to +260c
6) has the lowest coefficient of friction of all the known solid materials
7) not aging
8) nonstick


All sizes are available on costomers' request
Mar-07-22

Ptfe Gaskets

$3 - $10
MOQ: Not Specified
Supplier From Zhejiang, China
 
PTFE gaskets is made from pure PTFE sheet, PTFE being most resistant to chemicals does not react easily. It has the lowest coefficient of friction. RL-5330 is manufactured from qualitative range of raw materials, thus exhibiting quality features such as high efficiency and durability.
Jun-04-22

Ptfe Gaskets

$1 - $30
MOQ: Not Specified
Supplier From Zhejiang, China
 
PTFE gasket is made from pure PTFE sheet, PTFE being most resistant to chemicals does not react easily. It has the lowest coefficient of friction. PTFE gasket is manufactured from qualitative range of raw materials, thus exhibiting quality features such as high efficiency and durability.
May-05-15

Ptfe Gasket

$120
MOQ: Not Specified
Supplier From Shijiazhuang, Hebei, China
 
Anti-corrosion spacer plate is a sealing spacer plate through special processing,adopting PTFE as its main raw material.
Feature¡êo
Durable, sealing performance is reliable;
PTFE itself has the best corrosion resistance and aging resistance, after special processing which has very good creep resistance and cold flow resistance;
Can be used in a long-term security in a wide range of temperatures
Soft and easy cutting,can be cutted by machine or by hand, easy to install;
The plate is white, clean and no pollution .Will not pollute the contact medium via shedding.
Application:
Resistance to a wide range of chemicals,especially suitable for hydrocarbon, strong corrosion occasion.
Can fit uneven scratching surface.
Suitable for chemical industry,power generation,paper making,oil refining,machinery and other industrial applications.



1250mm x 1800mm or 1524 x 1524mm
tolerance: + ¡¨¤3%
Thick: 1mm-5mm
Mar-15-19
Supplier From Kolhapur, Maharashtra, India
 
We supply Pure PIFE (Teflon) Gaskets which have high chemical resistance, non-contamination and non corrosive properties. These Gaskets are suitable for Acidic media.
Thickness : 0.5mm to 6 mm

Features :
Chemical resistance
Non-corrosive
Non-contaminating
Odourless
Apr-27-16
Supplier From Bandar Baru Bangi, Selangor, Malaysia
 
Polytetraflouroethylene(PTFE) / Teflon gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF).

PTFE/Teflon sheets, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.2Mtr(Width) x 10.0Mtr(Length)






1.0Mtr(Length) x 1.0Mtr(Width) x 50cm(Height)

Gross weight @ 200kgs
Mar-08-18

Expanded Ptfe Gasket

$0.10 - $1.00K
MOQ: Not Specified
 
100% PTFE resistant to all corrosive media. Soft,twistable and bendable, used continue their service and keep its best performance. Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured

Advantages
A wide range of applications for all type of flanges
Gasket easy cut maked

Higher temperature
Multi-directionally expanded PTFE has exceptional mechanical strength
Higher temp than other PTFE sheet

Cost savings
High quality - long life - reduce changing gasket period - cut cost
Easy and simple to install gaskets, a used gasket changed easily

Large sizes
Offers some of the largest sheet sizes in the industry
sizes from 1/2'' - 24'' available, welcom Custom gaskets
May-05-25

Pure Ptfe Gasket, zd-g1600

$10 - $12 / Dozen (CIF)
MOQ: Not Specified
 
Pure Teflon gasket is also known as PTFE gasket or Teflon gasket. It is made of flat gaskets, V-shaped gaskets, piston rings, ball valve gaskets and other components by mechanical turning or cutting of polytetrafluoroethylene rods, tubes and plates. It has good characteristics such as corrosion resistance, anti-aging and non-conductivity. Pure
Polytetrafluoroethylene gaskets are a kind of clean sealing products that do not cause pollution to any substances they come into contact with. They are widely used in various sealing applications involving strong acids, strong alkalis, strong oxidants, chlorine gas and other media that are not allowed to be contaminated.
Apr-15-20
Supplier From Busan, South Korea (Republic Of Korea)
 
TECHNICAL DATA
- Tensile Strength : 28 ~ 35 MPa
- Elongation : 200 ~ 400%
- Temperature : up to 500°F (260 C)
- Hardness : R25 (Rockwell)

Application
- Control valves, Rod, piston

FEATURES
- Elimination of costly seal failure or blowouts
- Reduced installation costs
- Reduced equipment downtime with exact seal specifications
- Reduced inventory costs
- Lower friction / Friction a measurement of the resistance to sliding between a seal and hardware surfaces, is directly related to seal material coefficient of friction and the total load.
- Longer Life / Individual sealing rings expand under bolt loading to maintain a tight, virtually leak proof set with up to 50% longer services over braided styles.
Jun-05-19

Ptfe Gaskets Press Moulding Machine

$15.00K
MOQ: Not Specified
Supplier From Changzhou, Jiangsu, China
 
Gaskets Press Machine Features:Efficiently producing: 300pieces/h(large size);More energy saving: the total power only 5KW;More friendly to environment: no PTFE powder splashing but powder output automatically;More precise: producing gaskets by controlling the power quantity;More time saving : the power cut off automatically while the production number set up;Longer working life : no heat while working.

Gaskets Press Machine Features:

Efficiently producing: 300pieces/h(large size)
More energy saving: the total power only 5KW
More friendly to environment: no PTFE powder splashing but powder output automatically
Intelligent control : producing gaskets by controlling the power quantity
More time saving : the power cut off automatically while the production number set up
Longer working life : no heat while working.
high quality components used.

Industrial Applications For Teflon® Gaskets

PTFE gaskets are used in many industrial applications, especially the following:

· Compressor High temperature and surface-wear resistant sealing gaskets.

· Electric Motor Sealing gaskets for components that require corrosion-resistance, exposure to high and low temperatures and high surface wear.

· Medical Component Seals for electronic instrumentation using materials that provide secure seals and long product life. Specialty gaskets, especially miniature sizes, are required for many medical devices.

· Petrochemical Gaskets for process equipment that are resistant to corrosive fluids, temperature extremes and surface wear.
Jun-04-22

Ptfe Rubber Gasket

$1 - $20
MOQ: Not Specified
Supplier From Zhejiang, China
 
PTFE rubber gasket is using EPDM rubber or NBR rubber as the main body,compounding with a special activation of pure PTFE shell in the effective part of the sealing.Its biggest advantage is the using of special bonding process fully bonded PTFE and synthetic rubber,and PTFE rubber gasket has excellent overall composite.
Jun-04-22

Ptfe Evelop Gasket

$1 - $40
MOQ: Not Specified
Supplier From Zhejiang, China
 
PTFE envelop gasket is a non-metallic gaskets,general consists of two parts of the coating and inserts.The coating mainly plays the role of corrosion,usually made of PTFE.The inserts (filler) is good elasticity with or without metal reinforcement layer of non-metallic sealing materials,usually made of asbestos rubber sheet.
Jun-22-11
Supplier From Zaozhuang, Shandong, China
 
Wealson offers a complete line of standard and custom gaskets produced to the highest standards.

PTFE gaskets are excellent in applications involving solvents,corrosive chemicals and high temperatures.
There are different types of PTFE gaskets for each particular sealing application: ring, full face, flange and envelope gaskets.

A PTFE envelope gasket is a gasket that is split or machined from the outside diameter wall to 1/16 of an inch from the inside diameter. Envelope gaskets can be supplied slit/v-type or milled/square cut with or with out a filler.
A ring gasket has a thickness, inside and outside dimension.
A full face gasket has a thickness, inside and outside dimension along with bolt holes.
A flange gasket is primarily the same as a full face without the bolt holes.

These gaskets are available in standard and metric pipe sizes up to 60" outside diameter.

These gaskets are available in standard and metric pipe sizes up to 60" outside diameter.
Jul-17-18
Supplier From Sriperumpudur, Tamil Nadu, India
 
We are the largest Ring Joint Gasket Manufacturer in Asia. At Asian Sealing Products, we manufacture 14 types of ring type joint gaskets with highest quality and we will ensure that the gaskets are delivered to the customers on time.
Mar-31-17

Gmp-500L Ptfe Gasket Molding

$14.50K - $17.00K
MOQ: Not Specified
 
Machine Model: GMP500L
Suit for raw material: PTFE molding powder, PTFE suspension grade powder, Teflon molding powder fine cut, Teflon molding powder medium particle size, Free flow powder, non-free flow powder
Application of Teflon seal molding machine:
Apply to produce PTFE sealing washer, PTFE idler wheel for microwave ovens, PTFE principal axis for microwave ovens, PTFE presser foot for sewing machine, PTFE valve element for air conditioning, valve element for air compressor, thin piston ring, electronic insulators and T shape, circular, spherical and pure PTFE shaped and filled PTFE Products
Product Features of Automatic ptfe gasket molding machine :
Automatic powder PTFE molding machine of advanced design, high precision, low noise (less than 60 db ), simple structure, convenient adjustment, continuous charging ,high efficiency ; the weight error of suppression of products is 3â?°, using linear ball bearings,low noise,steady transmission,low energy consumption and long service life.


1.Suit for Gasket OD: 50-150mm

2.Suit for Gasket thickness: 2-15mm

3.Motor power:4KW

4.Capacity: 360-600pcs/h

5.Pressure:20T

6.Control way: touch screen

7.Size:1300x1300x2000mm

8.Weight:1400KGS


PTFE automatic molding machine for PTFE gaskets, PTFE seals, PTFE washers
9290 Ptfe Gaskets Suppliers
Short on time? Let Ptfe Gaskets sellers contact you.
Explore Ptfe Gaskets related import export discussions