EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity.
EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning.
Processing suggestion
EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating.
After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately.
Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate
[English name] Sodium dodecyl sulfate.
[Abbreviation] SDS
[CAS No.] 151-21-3
[Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl
[Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl)
[Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards.
[Technical Indicators]
[Performance and Applications]
This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries.
(1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc.
(2) Used as anionic surfactant, emulsifier and foaming agent
(Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc.
(4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation.
(5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent.
(Use 6) Biochemical analysis, electrophoresis, ion pair reagent
The offered coco peat is washed, dried and compressed into 5 kg blocks. It serves as the ideal peat moss alternative in horticulture supplies. Washing controls the electrical conductivity of the block which is important for root and plant growth. We are coco peat block manufacturers offering blocks that can withstand high compaction. As an ideal soil conditioner and a growing medium, coco peat blocks once hydrated will expand to 15 litres per kg. Coco peat 5 kg blocks are 100% soilless growing medium. It can be used for soil conditioning as well as a mulching agent.
Features
Ability to withstand high compaction force
Eco-friendly and user-friendly
100% soil less growing medium
Our Coir Discs is developed using optimum quality coir pith and are specifically used to control the weeds from plant container and landscape plants. It has high water absorption capacity thus water can be saved by reducing evaporation from the soil media. Moreover, the coconut coir pith & coco coir peat Round Discs gives a rehydrated yield of one litre of soil per disk.
Coco discs consist of coarse coco material, which is made of the husk of the coconut. Cutting the husk creates an airy, easily manageable and powerful growing medium with good drainage properties. These discs are compressed for transport and expand to their original size after water is added.
Coco peat is a lightweight, organic material made from coconut husk pith after coir fibers are removed.
- Material: spongy
- Holds 8â??10 times its weight in water,
- Near-neutral pH (5.5â??6.8).
- Used: growing medium, soil amendment, or hydroponic substrate, excellent water retention, aeration, and biodegradability.
Shapes: compressed bricks, it expands when hydrated and is low in nutrients
Product Specifications:
- Form: Powder (loose packing 20kgs/bag) or block (compressed packing).
- Compression Ratio: Over 75 Liters / Block.
- Impurities/sand: 3% Max.
- Moisture: 15-20% Max.
- PH: 5.8 to 6.8.
- Block Size: 30 x 30 x 15 cm.
- Fiber length: Less than 2cm.
- Weight : 5kg (+/- 3%).
- Packaging: In PP bag 20kgs, or 5kg/block; 192 blocks/pallet; 24 pallets/40ft (23 MTs).
- Electric Conductivity (E.C):
+ High EC (Animal Bedding): 3.5 - 5 mS/cm.
+ Low EC (For Plant Growth) < 0.5 mS/cm
Payment & Delivery Terms:
Payment: T/T (50% in advance, balance negotiable).
Delivery: Fast and reliable shipping with this secure packaging.
If our Coco Peat matches your requirements, please share more details regarding quantity, size preferences, and packaging needs. We will provide you with our best quotation as soon as possible.
If you need more information, please contact me via,
Product name: Coconut Peat
Brand name: 99 Gold Data
Block size: 30 x 30 x 15 cm
Weight: 5 kgs (+/- 3%)
pH: 5.8 to 6.8
Compression Ratio: Over 75 Liters / Block
Moisture: 15 â?? 20% max
Electric Conductivity (E.C):
o High EC (Animal Bedding): 3.5 - 5 mS/cm.
o Low EC (For Plant Growth) < 0.5 mS/cm.
Impurities/sand: 3% max
Fiber length: Less than 2cm
Price: Negotiation
Packing: In PP bag 20kgs, or 5kg/block, 192 blocks/pallet, 24 pallets/40ft (23 MTs)
Payment method: T/T 40 in advance, 60% on scan bill, L/C at sight 100%
Delivery time: 10 - 20 days
ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature.
ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning.
MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: ABS
TYPE: Regrind
SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt
Origin: Bangladesh
LOADING WEIGHT: 26 Ton
FOB (USD/Ton): 750$ - 950$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity.
Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes
Processing suggestion
PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating.
After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately.
Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
Urea formaldehyde is a type of thermosetting resin that is produced by the reaction of urea and formaldehyde. This resin is commonly used in the production of adhesives, particularly for wood products such as particleboard, medium-density fiberboard (MDF), and plywood. The resin provides excellent bonding properties and is valued for its water resistance and durability.
Urea Formaldehyde Concentrate (UFC 85) is a clear and viscous liquid, composed of formaldehyde, urea and water. It provides high concentration of formaldehyde commercially available in an easy-to-use form.
Appearance
White or Light Yellow Emulsion
pH
6.5-8.5
Emulsion Lonic
Weak Anionic
Appropriate Thinner
10-30 â?? Water Thickening
Standard
GB/T 26527-2011
Organic Silicon Defoamer
1. The defoamer is composed of polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc.
2. At low concentrations, it can maintain good elimination bubble suppression effect.
3. Foam suppression performance is prominent
4. Easily dispersed in water
5. The compatibility of low and foaming medium
6. To prevent the growth of microorganisms
Advantage
It is composed of dispersant and stabilizer, low dosage, good acid and alkali resistance, stable chemical properties, easy to disperse in water, effectively prevent bacterial growth. The properties are stable during storage.
Application
1. Papermaking chemical pulping high temperature vacuum or pressure in the defoaming in pulp washing machine
2. When the alkali refining agent of textile industry, inhibit elimination of treatment before
3. Circuit board cleaning
4. Oil mud defoaming in the process of mining
5. Textile printing and dyeing processing
6. Agricultural chemicals
Carbomer
1.Carbomer (carbomer) is a high molecular weight polymer of acrylic acid bonded with pentaerythritol allyl ether or allyl sucrose. Calculated according to the dry product, the carboxylic acid group (-COOH) should be 56Chemicalbook.0%ï½?68.0%. Carbomer is a very important rheology modifier. The glue combined with water is acidic. The neutralized carbomer is an excellent gel matrix, which is important for thickening and suspension.
2.Carbomer (Carbomer) is a pentaerythritol and other resin that is linked with deformation. It is a very important and fantastic
rheological modulated chemistry book section. The neutralized carbomer is an excellent spring limit. , There are important
processes such as thickening and suspension, simple, good stability, and a wide range of deep, cream, and medium processes
Specification
Product Name:
Carbomer 940
Appearance
White Powder
Specification
99%
CAS
9007-20-9
Package
1kg/aluminum foil bag; 25kg/drum
Sample
Availiable
Storage
Dry Place
Shelf life
2 Years
Application:
Carbomer is used for topical formulations and suitable for preparation of gels, creams and coupling agent. Carbomer and
cross-linked acrylic resin as well as series products of these cross-linked polyacrylic acid are widely used at present and are often used in topical lotion, cream and gel. In a neutral environment, Carbomer system is an excellent gel matrix with crystal appearance and nice sense of touch, so Carbomer is suitable for preparation of cream or gel..
Good Price 30% LDAO Lauryl Dimethyl Amine Oxide CAS 1643-20-5
Product details
Chemical Name: Lauryl dimethyl amine oxide
Code: LDAO 30%
Other Name: N,N-dimethyldodecylamine-N-oxid
CAS NO.: 1643-20-5
Formula: C14H31NO
Purity : 30%
LDAO at room temperature is a colorless or yellowish transparent liquid, is a special type of surfactant,
it becomes cationic in acidic medium, and in neutral or alkaline medium is non-ionic. In addition to own
the general surface active agent properties, but also has excellent solubilization, thickening, emulsification, foaming, stable foam, soft, moisturizing, antistatic, good compatibility with human skin, the slightly physiological toxicity, easy to biodegradation.And it has certain bactericidal properties and mildew - proof effect
2. Mild to skin. Make cloth soft and smooth, make hair soft, easy to comb, glossy and shiny.
3. Bleach stable. Good ability of thickening and solubilizing to keep product stable.
4. Good ability of sterilizing and dispersing calcium soap, good biodegradability.
5. Be compatible with anioncic, cationic, amphoteric and nonionic surfactants.
6. Especially suitable for shampoos, bath washes, dish washing detergents
Application
Lauryl Dimethyl Amine Oxide used as detergent, emulsifier, wetting agent, foaming agent, softener,
milling agent and dyeing auxiliary.
Also can be used as sterilizing agent and antistatic agent, as a coagulant during metal plating, as an initiating agent or inhibiting agent in polymerization, as an emulsifying agent or moisturizing agent in cosmetics; otherwise, it can be used as an antirust agent for metal.
Storage:
Kept in dry, cool, and shaded place with original packaging, avoid moisture.
Ambient temperature is10-50, the container to be sealed.
It is not advisable to use containers of copper material. Recommended storage in plastic containers;
a shelf life of two years.
Specification
Product
Lauryl Dimethyl Amine Oxide(LDAO 30%)
CAS#
1643-20-5
Batch No
220310-10
Quantity:
28000KG
Date of manufacturing
Mar. 10th, 2022
Date of expire
Mar. 9th, 2023
Iteam
Specification
Results
Appearance
Light yellow clean liquid
Confirms
Active matter %
29 ~ 32
30.1
Free amine (%)
0.70
0.26
Free peroxide (%)
0.50
0.08
Color (APHA)
100
42
PH value ( 10% solu,25
6.0 ~ 8.0
7.5
Conclusion
Qualified
Urea formaldehyde adhesive powder is a type of adhesive that is commonly used in the woodworking and furniture industries for bonding wood and wood-based materials. It is a powdered resin that is typically mixed with water to form a glue-like substance for bonding purposes. Here are some key points about urea formaldehyde adhesive powder:
Composition: Urea formaldehyde adhesive powder is composed of urea formaldehyde resin, which is synthesized by the reaction of urea and formaldehyde. This reaction produces a thermosetting resin that is commonly used as an adhesive.
Powder Form: The adhesive is manufactured in a powdered form for ease of handling and storage. The powder is then mixed with water to form a workable adhesive solution.
Application: Urea formaldehyde adhesive powder is widely used in the bonding of wood and wood-based products, such as particleboard, plywood, and medium-density fiberboard (MDF).
It is suitable for applications where a strong and durable bond is required.
Curing Process: Urea formaldehyde adhesives are thermosetting, meaning that they undergo a curing process when exposed to heat and pressure. This process results in a cross-linked structure, providing a strong and durable bond.
Features: Urea formaldehyde adhesives offer good bonding strength, water resistance, and heat resistance.
They are cost-effective and have been widely used in the woodworking industry for many years.
