Find Verified Precision Dx Urine Test Strip Etg 500 Suppliers, Manufacturers and Wholesalers

The Precision DX - ETG Test strip is a fast visual, competitive panel immunoassay that can be used for the detection of ETG drug metabolites at specific cutoff levels in human urine.

Read results at 5 minutes
500 ng/mL cut-off
Compared to Lab Tests
Compared to Generic, it's easier to interpret, more accurate, and reads faster
Results remain valid for up to 4 hours after test initiation
These are screening devices read positive or negative, qualitative, and although highly accurate, if you read a positive we recommend a certified lab for LC-MS/MS Confirmation. For more information dial 1-866-526-2873 or email sales@americanscreeningcorp.com.

These drug tests are intended for workplace testing & forensic use ONLY (not FDA cleared or CLIA waived).

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag

- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12

One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds.

OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems.

Tiny blood sample (1 microlitre)

End-fill strip automatically draws in blood

Indicator window shows when you have enough blood

Touchable strip

Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.

Blood glucose testing strip designed to eliminate the risk of a false reading by checking each sample twice.
one Touch Ultra 100 Test Strips is a brilliant diabetic care product for diabetic patient to examine the blood sugar level on a regular basis and keep a check on it. The pack consists of 50 blood glucose monitoring strips. The Onetouch Ultra 2 is one of the best in class glucometers which makes self-monitoring of blood glucose very easy.
OEM Meter Diabetes Sensor Blood Glucose Test Strips
Packing:24Sets / CTN
CTN Dimension:37X32.5X20.5CM
G.W:4.7 KGs N.W:4.2 KGs

Thai White Rice 100% | Premium Grade | FOB Thailand
Certified by: ISO, HACCP, HALAL, US FDA, BRC

Price : USD 500-550
Product Description : "Our Thai White Rice 100% is sourced from the finest rice paddies in Thailand, carefully milled and packed under strict quality standards. Ideal for importers, wholesalers, and food manufacturers seeking premium-grade rice with consistent quality and compliance with international standards.

Available FOB Thailand, our rice is rigorously tested and certified to ensure top-tier safety and quality.

Product Specifications:
Whole Kernels: 60%
Broken Kernels: 4.5%
Small Broken (C1): 0.1%
Red & Under-Milled Kernels: 0.5%
Yellow Kernels: 0.2%
Chalky Kernels: 6.0%
Damaged Kernels: 0.25%
White Glutinous Kernels: 1.5%
Paddy Grains: 5 grains/kg
Moisture Content: 14%

Origin: Thailand

Packaging: 5kg, 25kg, 50kg PP/PE bags (customized options available)

Minimum Order Quantity (MOQ): 1 x 20FT Container

Supply Ability: 20,000 MT/month

Price Range: FOB Thailand $500-550 per MT

Key Features:
100% Thai Origin - Known for purity and fragrance
Uniform Grain Size -Perfect for restaurants and repackaging
High Milling Quality - Long shelf life and minimal breakage
Moisture-Controlled - For optimal freshness during shipment
Compliant with International Food Safety Standards

Certified & Compliant:
ISO - Quality Management System
HACCP - Hazard Analysis Critical Control Points
HALAL - Certified for Muslim consumers
US FDA - U.S. Food & Drug Administration approved
BRC -Global Food Safety Certification 0.5"
Keywords : Thai White Rice Exporter
Premium Thai Rice Supplier
Thai White Rice Wholesale Price

Place Of Origin : Thailand

Thai White Rice 100% | Premium Grade | FOB Thailand
Certified by: ISO, HACCP, HALAL, US FDA, BRC

Price : USD 500-550
Product Description : Our Thai White Rice 100% is sourced from the finest rice paddies in Thailand, carefully milled and packed under strict quality standards. Ideal for importers, wholesalers, and food manufacturers seeking premium-grade rice with consistent quality and compliance with international standards.

Available FOB Thailand, our rice is rigorously tested and certified to ensure top-tier safety and quality.

Product Specifications:
Whole Kernels: 60%
Broken Kernels: 4.5%
Small Broken (C1): 0.1%
Red & Under-Milled Kernels: 0.5%
Yellow Kernels: 0.2%
Chalky Kernels: 6.0%
Damaged Kernels: 0.25%
White Glutinous Kernels: 1.5%
Paddy Grains: 5 grains/kg
Moisture Content: 14%

Origin: Thailand

Packaging: 5kg, 25kg, 50kg PP/PE bags (customized options available)

Minimum Order Quantity (MOQ): 1 x 20FT Container

Supply Ability: 20,000 MT/month

Price Range: FOB Thailand $500-550 per MT

Key Features:
100% Thai Origin - Known for purity and fragrance
Uniform Grain Size- Perfect for restaurants and repackaging
High Milling Quality - Long shelf life and minimal breakage
Moisture-Controlled - For optimal freshness during shipment
Compliant with International Food Safety Standards

Certified & Compliant:
ISO - Quality Management System
HACCP - Hazard Analysis Critical Control Points
HALAL - Certified for Muslim consumers
US FDA - U.S. Food & Drug Administration approved
BRC - Global Food Safety Certification"
Keywords : "Thai White Rice Exporter
Premium Thai Rice Supplier
Thai White Rice Wholesale Price"

Place Of Origin : Thailand
Brand Name : Private Label

We are supplier and exporter of TMT Rebars.

TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storeyed buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS

Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg

Fruit Vegetable Peeling Machine, pineapple peeling machine ,and so on lots of kind fruit /vegetable peeling machine .
Watermelon peeling machine with half cutting function ,
Capacity 1-1.5T, bent straight, tall, thin, soft and hard can be peeled, with adjustable peeling thickness. The machine computer control has adaptive function (i.e. automatically adjust to low with height, fine with thickness, and straight with bending), and can be peeled with single or double knives. It is a key equipment for industrial processing of dried fruits and vegetables, slices, diced, strips, blocks, Rong, powder, preserved, and fresh cut. It is also compatible with 26 types of fruits and vegetables, including winter melon, watermelon, pineapple, papaya, grapefruit, and taro.
Operation: Click on the touch screen - Set parameters - Place the fruit into the fruit holder - The machine automatically completes picking, delivering, peeling, and separating the material. Peeling and separating
Processing capacity 500 pieces/hour
Peeling thickness 1.5-10mm
Adapt to fruit height of 80-400mm
Adapted fruit diameter 80-250mm
Power 1.5kw 220V/50Hz
Weight 300kg
Machine size 1.45 x 0.9 x1.7m

Meat dicer cutter machine is one of the common machines in the meat processing industry. They can quickly and accurately cut large pieces of meat, such as beef, pork, lamb, or poultry, into small diced pieces for subsequent cooking or process purpose .
Machine size : 1480*800*1000mm 1950*1000*1120mm
Cutting groove 84*84*350mm 120*120*550mm
Cutting grating 5/6/7/8/10/12/14/21/24/28/30mm
working power 3kw/380v 3.7kw/380v
machine weight 500kg 700kg
capacity 500-600kg/h 700-900kg/h
Our meat dicer cutter machine is suitable for large factories, mining enterprises, universities, government cafeterias, central kitchens, fast food companies, food factories, fresh supermarkets, meat product factories, semi-finished product processing and distribution places, etc
304 stainless steel, it can accurately cut into shapes such as dice, silk, and strips. It is an important equipment in the production process of meat products. It can cut the main raw materials such as meat pieces, minced meat, and fat into the diced meat that users need. The size and style of the diced meat are determined by the tool switch, with high work efficiency, large output, easy maintenance, simple tool disassembly and cleaning, and can meet the production needs of a large number of users.

Belt press juicing machine for fruit vegetable
Use for :
01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice
04.Extraction of medicinal juice

1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee
2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life
3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise
4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content.
5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost
6. Juice yield 85%
Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw,
filter belt speed 1.5-3.5m
Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm
Width 1475-3430mm high 1820-2420mm

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Accu-Chek test strips are essential components of blood glucose monitoring for individuals with diabetes. These strips are designed to work seamlessly with Accu-Chek blood glucose meters, enabling accurate and reliable measurement of blood sugar levels. The strips utilize advanced technology to require only a small blood sample, making the testing process more comfortable. With rapid and precise results, Accu-Chek test strips empower users to effectively manage their diabetes by providing valuable insights into their current glucose levels. This user-friendly and indispensable tool plays a crucial role in facilitating proactive health management for individuals living with diabetes.

Spring steel strip
Steel grade
65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc
Thickness 0.08-4.0mm
Width 3-400mm
Hardness <200HV, 200-300HV, 300-550HV
Edge slit edge; both rounded; one side round, one side slit; square etc
Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc
Tolerance thickness +/-0.01mm max; width +/-0.05mm max
Physical propety Tensile strength: 450-1850N/mm2

Spring steel strip
Steel grade
65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc
Thickness 0.08-4.0mm
Width 3-400mm
Hardness <200HV, 200-300HV, 300-550HV
Edge slit edge; both rounded; one side round, one side slit; square etc
Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc
Tolerance thickness +/-0.01mm max; width +/-0.05mm max
Physical propety Tensile strength: 450-1850N/mm2

Spring steel strip
Steel grade
65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc
Thickness 0.08-4.0mm
Width 3-400mm
Hardness <200HV, 200-300HV, 300-550HV
Edge slit edge; both rounded; one side round, one side slit; square etc
Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc
Tolerance thickness +/-0.01mm max; width +/-0.05mm max
Physical propety Tensile strength: 450-1850N/mm2

ss 301 steel strip
wide 10mm
thickness 0.5mm
hardness 1300-1400 mpa
sharpend from one side

K 67 SPRING STEELHARDNESS 43HRCTHICKNESS : 2.5MMQTY:3.000 U
Standard:AiSi
Standard:ASTM
Standard:DIN
Standard: hard GB
Standard:JIS
Place of Origin:CN;GUA
Technique:Cold Rolled
Surface Treatment:Polished
Steel Grade:Ck67ck70ck75 Sae1070 Sae1074
Application:Industry
Width:8-300mm
Length:Customer\'s Request
Product Name:High Carbon Steel Strip Spring
Surface:Heat treatment
Grade:ck60,ck67,ck70,ck75,C75cr1 SAE 1060, SAE 1065, SAE 1070, SAE 1075
Color:Blue, polished blue, polished bright
Material:carbon steel coil
Edge:Round, slit, square
Certificate:ISO9001:2008/SGS/BV
Thickness:0.15-2.5mm
Hardness:<20hrc, 20-30hrc, 30-55hrc