Deliver Power up to 328ft (100m)
Plug and Play installation
Max 30W output power
Simplified the installation of Ethernet based devices
Compliant with IEEE802.3at
Auto Detection and protection of non-standard Ethernet terminal .
Deliver Power up to 328ft (100m)
Plug and Play installation
8 ports PoE
Simplified the installation of Ethernet based devices
Auto Detection and protection of non-standard Ethernet terminal
Pass Through Data Rates : 8-Port 10/100 Mbps.
Deliver Power up to 328ft (100m)
IEEE802.3af Standard compliant
Plug and Play installation
Output Voltage selectable (5/9/12V)
Simplified the installation of Ethernet based devices.
Enable the non-PoE devices get power from PoE Switch.
1 Function: Complete Passive Power Over Ethernet set, including RJ45 Injector + POE Splitter. Suitable for using with products that basically do not support Power Over Ethernet.
2 Easy to Install and Manage: Customers can automatically and securely mix existing and PoE devices on the network and can coexist with existing Ethernet cables.
1 Function: Complete Passive Power Over Ethernet set, including RJ45 Injector + POE Splitter. Suitable for using with products that basically do not support Power Over Ethernet.
2 Easy to Install and Manage: Customers can automatically and securely mix existing and PoE devices on the network and can coexist with existing Ethernet cables.
126120 Power Over Ethernet Suppliers
Short on time? Let Power Over Ethernet sellers contact you.
Nc-pus081h 8-port 10/100mbps desktop switch with 4-port poe provides the seamless network connection. It integrates 100mbps fast ethernet and 10mbps ethernet network capabilities.4 of the 8 auto-negotiation rj45 ports (port-1 to port-4) of the switch support power over ethernet (poe) function. These poe ports can automatically detect and supply power with those ieee 802.3af compliant powered devices (pds). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as aps, ip cameras or ip phones, etc.
Highlights:
Power supply 100-240vac, 50/60hz
Dimensions (l x w x h ) 280mm*180mm*44mm
Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design.
Below are the key features of pse-hqd
Ieee802.3af compliant.
Per port maximum output pse-hqd, 650ma.
Pse-hqd supports high power mode and backward compatible to normal power mode.
Maximum total power protection.
Support pd power classification from class 0 to class 4.
Per port over/under voltage protection.
Per port short circuit protection.
Per port over current protection.
Thermal cut off.
Equip common mode choke (per port) to reduce emi.
Enhance current surge protection.
Per port pse status indication.
Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design.
Below are the key features of pse-qd
1.Ieee802.3af compliant.
2.Per port maximum output pse-qd, 450ma
3.Maximum total power protection.
4.Support pd power classification from class 0 to class 4.
5.Per port over/under voltage protection.
6.Per port short circuit protection.
7.Per port over current protection.
8.Thermal cut off.
9.Equip common mode choke (per port) to reduce emi.
10.Enhance current surge protection.
11.Per port pse status indication.
Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
The main features of tpd-50 are as following
A.Isolated pd module, isolation level 1.5kv
B.Ieee802.3af compliant.
C.Support wide input voltage range, 39vdc to 55vdc.
D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50)
E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
Below are the main features of thpd-33 modules
A.Isolated pd module, isolation level 1.5kv
B.Backward compatible ieee802.3af
C.Support wide input voltage range, 36vdc to 55vdc.
D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33)
E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space.
High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules.
Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system.
The main features of tpd-12 are as following
A.Isolated pd module, isolation level 1.5kv
B.Ieee802.3af compliant.
C.Support wide input voltage range, 39vdc to 55vdc.
D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12)
E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
F.Thermal cut off & short circuit protection.
G.The operating temperature is from -15oc to 55oc, @full load.
The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules.
With all the features and benefits of the nvc110 designed for the professional market, the airgoggle nvc 110p supports additonal power over ethernet function, the ieee 802.3af standards. With the added poe function, this makes the camera much easier to use in isolated indoor areas and remote outdoor security applications.
Key features
Supports power over ethernet and only one ethernet cable needed to connect to the camera
Highly efficient mpeg-4 video compression (100:1), at least 10 times more efficient, in terms of network bandwidth usage, when compared to motion jpeg (m-jpeg).
Auto iris and vari-focal
Supports up to 30 frames/sec, minimum storage needed
Bi-directional audio communications
Real streaming audio/video
Motion detection and event-triggered alarm processing
Simple to record and playback on a pc
Remote pan/tilt/zoom control
Wide range of network protocols supported
User-friendly network video recorder (nvr100) viewer software included
Pda pv100 viewer included for remote wireless pda viewing
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2 'C output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
126120 Power Over Ethernet Suppliers
Short on time? Let Power Over Ethernet sellers contact you.
