POTOP Desktop Cast Film Extruder
Main parameters:
Model FDSI-25/22
Applicable materials PE/PP/PET/PC/PVDF/EVA etc.
Screw diameter 25mm
L/D 28
Screw speed 0-120rpm
Die with 200mm
Roller width 220mm
Product width 150mm (depends on materials)
Product thickness 0.02-0.1mm
Pressure measurement range
&accuracy 0-50MPa 0.5%F.S
Line speed 0-10m/min
Film defect system Yes
Operating temperature Room temperature-350�°C
Temperature control accuracy �±1â??
Control SIEMENS PLC
Working voltage Three-phase 380VAC�±10%,Single-phase 220VAC�±10%,50Hz
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet
extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5
Density 0.92 � 0.015
Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters."
Model FASI-25/22
Applicable materials PP, PE, PL, PVC, PE, ABS EVAã??PAã??TPU  etc.
Screw diameter 25mm
L/D 28
Screw speed 0-120rpm
Line speed 0-10m/min
Casting Roller Steel roller: 215*220mm
Rubber roller: 120*220mm
Casting die with 200mm
Film width 150mm (depends on materials)
Pressure measurement range &accuracy 0-50MPa 0.5%F.S
Heating/cooling method Electric heating / Fan cooling
Operating temperature Room temperature-350 C
Temperature control accuracy ±1
Control SIEMENS PLC
Working voltage Three-phase 380VAC ±10%,Single-phase 220VAC ±10%,50Hz
1257 Potop Desktop Cast Film Extruder Suppliers
Short on time? Let Potop Desktop Cast Film Extruder sellers contact you.
It is used in synthetic resin, adhesive, coating, etc., and also used in the production of herbicide, etc.
1. Pesticides: used in the production of pesticides, etc;
2. Coating: synthetic high-grade automotive paint;
3. Resin: synthesize various adhesives;
4. Papermaking: synthetic paper reinforcing agent;
5. Casting: sanding and film remover, synthetic casting adhesive;
6. Aquaculture: fumigation disinfectant;
7. Organic chemical industry;
8. Others: disinfection, sterilizing agent.
Purity: 96%min.
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.
2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.
3.Polyethylene glycol series products can be used as raw materials for ester surfactants.
4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.
5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.
7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.
We are a company specialized in producing PET flakes with good standards we have our factory. Main Products: Clear PET Flakes, light/blue PET Flakes, Green PET Flakes, Granules, Mixed color PET Flakes. Export Percentage: 71% - 80%. We supply high quality product, good price, best services, custom designs as well as delivery on time so please remember us. We welcome to work with various organization, groups, and traders of gifts and other cooperative.
Introduction of Pet Bottle Flakes
Pet Bottle Flakes are obtained post-consumer from recycled PET bottles. It is a light-weight, high-strength plastic material. Pet Bottle Flakes is blow moulded, injection moulded and extruded to produce bottles, films and injection moulded parts.
1.Type:PET Flakes
2.Style:Hot Washed
3.Color:Light Blue
4.Feature:High Quality
Used PET bottles will be recycled through physical recycling methods. It produces small pieces of regular size and consistent shape, namely recycled Pet Bottle Flakes , through recycling processes such as crushing, removing labels, removing impurities, washing, and drying.
Application of Pet Bottle Flakes
PET bottle flakes are mainly used in the textile industry, such as polyester staple fiber, the production of carpets, wadding cotton, non-woven fabrics, etc. Other cases like regenerated silk, which is used to produce high-end textile materials, such as blankets, sofas, curtains, clothing, etc.
At the same time, it is also used in the modified plastics industry, such as alloys, high-barrier materials, glass fiber reinforced materials, etc., which are used to make household appliances, automobiles, computers and other parts.
We are a company specialized in producing PET flakes with good standards we have our factory. Main Products: Clear PET Flakes, light/blue PET Flakes, Green PET Flakes, Granules, Mixed color PET Flakes. Export Percentage: 71% - 80%. We supply high quality product, good price, best services, custom designs as well as delivery on time so please remember us. We welcome to work with various organization, groups, and traders of gifts and other cooperative.
Introduction of Pet Bottle Flakes
Pet Bottle Flakes are obtained post-consumer from recycled PET bottles. It is a light-weight, high-strength plastic material. Pet Bottle Flakes is blow moulded, injection moulded and extruded to produce bottles, films and injection moulded parts.
1.Type:PET Flakes
2.Style:Hot Washed
3.Color:Light Blue
4.Feature:High Quality
Used PET bottles will be recycled through physical recycling methods. It produces small pieces of regular size and consistent shape, namely recycled Pet Bottle Flakes , through recycling processes such as crushing, removing labels, removing impurities, washing, and drying.
Application of Pet Bottle Flakes
PET bottle flakes are mainly used in the textile industry, such as polyester staple fiber, the production of carpets, wadding cotton, non-woven fabrics, etc. Other cases like regenerated silk, which is used to produce high-end textile materials, such as blankets, sofas, curtains, clothing, etc.
At the same time, it is also used in the modified plastics industry, such as alloys, high-barrier materials, glass fiber reinforced materials, etc., which are used to make household appliances, automobiles, computers and other parts.
We are a company specialized in producing PET flakes with good standards we have our factory. Main Products: Clear PET Flakes, light/blue PET Flakes, Green PET Flakes, Granules, Mixed color PET Flakes. Export Percentage: 71% - 80%. We supply high quality product, good price, best services, custom designs as well as delivery on time so please remember us. We welcome to work with various organization, groups, and traders of gifts and other cooperative.
Introduction of Pet Bottle Flakes
Pet Bottle Flakes are obtained post-consumer from recycled PET bottles. It is a light-weight, high-strength plastic material. Pet Bottle Flakes is blow moulded, injection moulded and extruded to produce bottles, films and injection moulded parts.
1.Type:PET Flakes
2.Style:Hot Washed
3.Color:Light Blue
4.Feature:High Quality
Used PET bottles will be recycled through physical recycling methods. It produces small pieces of regular size and consistent shape, namely recycled Pet Bottle Flakes , through recycling processes such as crushing, removing labels, removing impurities, washing, and drying.
Application of Pet Bottle Flakes
PET bottle flakes are mainly used in the textile industry, such as polyester staple fiber, the production of carpets, wadding cotton, non-woven fabrics, etc. Other cases like regenerated silk, which is used to produce high-end textile materials, such as blankets, sofas, curtains, clothing, etc.
At the same time, it is also used in the modified plastics industry, such as alloys, high-barrier materials, glass fiber reinforced materials, etc., which are used to make household appliances, automobiles, computers and other parts.
Main parameters:
Model FBVI-20-22
Applicable materials PEã??POFã??PVCã??PLA� LDPE LLEPE HDPE EVOH etc.
Screw diameter 20mm
L/D 28
Screw speed 0-120rpm
Line speed 0-10m/min
Roller width 220mm
Film tube width 200mm
Pressure measurement range &accuracy 0-50MPa 0.5%F.S
Operating temperature Room temperature-350�°C
Temperature control accuracy ±1
Control SIEMENS PLC
Working voltage Three-phase 380VAC±10%,Single-phase 220VAC±10%,50Hz
Casting film: referring to raw materials melted inside the extruders, the melt are extruded through narrow opening (T-Die) and formed cooingly though the quench roller. Owing to the use of quench roller, it is realized of high production speed triple or four times that of blowing films and high transparency, small thickness tolerance and the unique film transverse lengthways capacities.
The output of casting films in the developed countries fa exceeds that of blowing films.
The advantages of the casting film:
Including high transparence, superior stiffness, excellent moisture-proof capacity, excelling heat resistance, easy heat-sealing and high heat-sealing intension, because of which the casting films are occupying the more and more important position in the field of packing.
Application: packing for food, stationery, grocery, textiles and costume and used to compound with other films as internal materials and so on.
Sizes: Standard
Raw Material Used: Cast Iron & Brass Roller.
Hand Operated, Light in Weight, Operation is very easy.
Effortless rolling and printing.
Useful for Printing Detergent Bar rapidly after extruded from Plodder machine.
Size: Standard
Raw Material Used: Mild Steel & Cast Iron.
For forming of Detergent Bars.
After mixing the detergent chemicals Plodder Machine compresses the detergent paste & extrudes it in the form of bar of designed die shape & section, which is than divided into cakes as per desired length.
Feeding of the detergent paste has to be continuous through the hopper to the press worm.
Press worm strongly compresses and forwards the detergent paste into the conical forepart, finally it leaves the die.
The orifice of the die is designed as per the required shape of the Detergent Cake by the customer.
Double bars are extruded at the same time.
Changeable Die.
Smooth & easy operation.
Requires minimum working shape.
Production capacity per shift 1000 to 1200 kg/8 hr. approx.
Machine works on 3Phase with 3HP 1440 rpm Motor.
Size: Standard
Raw Material Used: Mild Steel & Cast Iron.
For forming of Toilet Soap.
Soap Strips is formed in the Toilet Soap Milling Machine.
Thin Soap Strips is fed to the Toilet Soap Plodder Machine.
Press worm strongly compresses & forwards the soap strips into the conical
forepart through the heating device.
A heating device is for maintaining proper temperature for the fed material.
Temperature is maintained with the Electric Thermostat device.
Toilet Soap Plodder Machine compresses the Soap Strips and extrudes it in the form of bars.
The bars extruded from the Die are of the desired shape and width, than after is cut into required length. Changeable Die.
Single Worm (L-3A Worm Dia. 12.7).
Refining Screen Barrel is provided for refining and homogenizing the soap.
Cooling jacket is provided at the plodder cylinder.
Easy and smooth in operation.
Minimum working space.
Appropriate working height.
Production capacity is 500 kg/8 hrs. approx.
Machine works on 5HP. 3Phase 1440 rpm Motor.
Stearic acid, also known as octadecanoic acid, produced by oil hydrolysis, mainly for the production of stearate. Each gram is dissolved in 21ml ethanol, 5ml benzene.
Stearic acid are widely used as the basic raw materials of surfactants. Used as lubricant and stabilizer in plastics industry; Softener and fungicide in textile industry and household detergents; It is used as wax model in precision casting and soap base in grease industry.
Application:
1. Mainly used to produce stearate
2. Widely used in making cosmetics and other organic chemicals.
3. Solvent for oil-soluble pigment, crayon slip agent, wax paper polish, emulsifier for glyceryl stearate, etc.
4. Food industry additives, raw materials for daily chemical products.
5. Manufacture of PVC plastic pipes, plates, profiles, and films.
Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times
Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available
Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
1257 Potop Desktop Cast Film Extruder Suppliers
Short on time? Let Potop Desktop Cast Film Extruder sellers contact you.
