Potassium Hydroxide is used in chemical manufacturing including potassium carbonate and other potassium chemicals, fertilizers, phosphates, agrochemicals, alkaline batteries and dyes. It is also widely used in soap and bleaching industry. It is widely used in cosmetics and personal care products, perfumes and fragrances, washing & cleaning products, water treatment products, coating products, and pH stabilizers, and thickening agent.
Potassium Hydroxide (50% Solution) FCC
WC Code: 16-021-002
Sales Specification
Appearance: Clear and colorless
Assay: 49.50 % â?? 50.50 %
Specific Gravity at 25oC: 1.503 â?? 1.515
Potassium Carbonate (K2CO3): 0.3 % Max.
Sodium (Na): 2,000 ppm Max.
Iron (Fe): 1 ppm Max.
Calcium (Ca) & Magnesium (Mg): 0.5 ppm Max
Packing
Sodium hydroxide 50% Solution is used for a variety of industrial applications like Pulp and paper industry (pulping and bleaching, de-inking waste paper). It is also used in Textile industry (fiber processing and dyeing) and in Soaps and detergents industry (saponification of fats and oils, anionic surfactant manufacturing).Sodium Hydroxide 50% Solution is also used in Bleach manufacturing. Sodium Hydroxide 50% Solution is used in Petroleum exploration and processing and in Aluminum production., as well as Chemical processing. It used in Waste neutralization, Acid gas scrubbing and Neutralizing of acids and acid gases.
Functions
Hydroxide Alkalinity, as NaOH: 48.50%
Sodium Chloride (NaCI): 100ppm
Sodium Carbonate (Na2CO3): 0.20% Max
Sodium Chlorate (NaCIO3): 0.30 Max
Sodium Sulfate (Na2SO4): 0.04 Max
Iron (Fe): 10.00 Max
Packing
Sodium Hydroxide Solution is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.
Appearance: A clear colorless liquid free from foreign matter
Relative Density at 40�°C: 1.506 %
Sodium Hydroxide [as NaOH]: 48.80%
Sodium Hydroxide (On Dry Basis) [as NaOH] : 99.80%
Sodium Carbonate [as Na2CO3]: 0.084%
Chlorides [as Cl] : 0.004%
Sulphate [as SO4] : 0.005%
Silicates [as SiO2] : 0.003 %
Copper as [as Cu]: 0.08 ppm
Manganese [as Mn]: 0.06 ppm
Iron [as Fe]: 4.02 ppm
Matter insoluble in water: 0.010ppm
Sodium hydroxide 50% Solution is used for a variety of industrial applications like Pulp and paper industry (pulping and bleaching, de-inking waste paper). It is also used in Textile industry (fiber processing and dyeing) and in Soaps and detergents industry (saponification of fats and oils, anionic surfactant manufacturing).Sodium Hydroxide 50% Solution is also used in Bleach manufacturing. Sodium Hydroxide 50% Solution is used in Petroleum exploration and processing and in Aluminum production., as well as Chemical processing. It used in Waste neutralization, Acid gas scrubbing and Neutralizing of acids and acid gases.
Functions
Hydroxide Alkalinity, as NaOH: 48.50%
Sodium Chloride (NaCI): 100ppm
Sodium Carbonate (Na2CO3): 0.20% Max
Sodium Chlorate (NaCIO3): 0.30 Max
Sodium Sulfate (Na2SO4): 0.04 Max
Iron (Fe): 10.00 Max
Packing
Categories Others
Qty in 20 FCL 25000kg
Min Order 1000kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E524
CAS No. 1310-73-2
HS Code 281511
Specification FCC/USP
Sodium Hydroxide E524, CAS No.1310-73-2, also called Caustic Soda, it appears either white flakes or a white granular powder. Food grade sodium hydroxide is an essential ingredient in manufacturing of Sodium Stearate, Sodium Bicarbonate, and various other sodium salts. Sodium Hydroxide is also used for pH and alkalinity adjustment.
As an experienced Sodium Hydroxide manufacturer and supplier, we has been supplying and exporting Sodium Hydroxide for almost 10 years. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Specifications
Potassium Hydroxide is a white flake or colorless clear liquid. It is one of the strongest alkalis.
Properties:
Product Name:Caustic Potash or Potassium Hydroxide
CAS No.:1310-58-3
EINECS No.:215-181-3
HS.Code:2815200000
Molecular Weight:56.11
Appearance: White Flake or colorless clear liquid
Main Applications:
Potassium Hydroxide is mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetics. Industrial ,medicine intermediate, potassium chemicals, synthetic rubber,
ABS resin, food additive dyestuffs and so on
Packages:
Plastic woven bags.
According to customer's requirement.
Strong alkaline white solid or colorless liquid products, Ion-Exchange Membrane process.
Main Applications of Potassium-hydroxide :
It is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium-permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation,de-sulfuration in petroleum refining, bio-fuel and alkaline battery.
(1). Potassium hydroxide is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation, cresol, de-sulfuration in petroleum refining, bio-fuel and alkaline battery.
(2). Potassium hydroxide can be used as a desiccant, sorbent, used for preparing potassium soap, oxalic acid and various salt, also used in electroplating, carving and so on.
(3). Potassium hydroxide can be used for the production of potassium soap,alkaline battery, cosmetics in light industry (such as cream, cream and shampoo).
(4). In the dye industry, Potassium hydroxide can be used for the production of vat dyes, such as vat blue RSN, etc..
(5). In the electrochemical industry, Potassium hydroxide can be used for electroplating, engraving, etc..
(6). In the textile industry, Potassium hydroxide can be used for printing and dyeing, bleaching and mercerizing, and used as the main raw material for synthetic fiber, polyester fiber manufacturing.
(7). In addition, it is also used in metallurgical heating agent and leather fat, etc..
(8). Potassium hydroxide can be used as analytical reagent, reagent, carbon dioxide and water absorbent, and also used in pharmaceutical industry;
(9). Potassium hydroxide can be used as the PH value of acid and alkali neutralization solution.
(10). Potassium hydroxide can be used as the basic chemical reagent, carbon dioxide absorbent. saponification agents.
Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.
Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
HiraChem is your specialist supplier of Sodium Hydroxide.
Sodium Hydroxide (Caustic Soda ) 98-99% Flakes.
Sodium Hydroxide, also known as lye and caustic soda, is an inorganic compound with formula NaOH. It is a white solid, a salt (ionic compound), consisting of sodium cations Na+ and hydroxide anions OHâ??. Sodium hydroxide is a highly caustic base and alkali, that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. It is highly soluble in water and readily absorbs moisture and carbon dioxide from the air. It forms a series of hydrates NaOH·nH2O. The monohydrate NaOH·H2O cystallizes from water solutions between 12.3 and 61.8 C. The commercially available "sodium hydroxide" is often this monohydrate, and published data may refer to it instead of the anhydrous compound
English name:Â Calcium Nitrite
Molecular formula:Â Ca(NO2)2
Molecular weight:Â 132
CAS NO. 13780-06-8
HS CODE:Â 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties:Â White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.
Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2Â as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2Â as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2Â as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0
Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.
Solid type: white powder or granules, hygroscopic, readily soluble in water. The aqueous solution may absorb CO2 and form aluminum hydroxide precipitate. Addition of NaOH is required to increase stability.
Liquid type: transparent slurry, stable during storage life. Prolonged stay of diluted aqueous solution may cause aluminum hydroxide precipitate.
Use:
In the construction process, it can be used as leaking stoppage agent combined with the sodium silicate.
In paper-making, this product can mix with aluminum sulfate to be a good filling agent.
In water treatment, it can be used as additive of purifier.
Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions
Use
Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry.
Quality Standard
Item Standard BP2000
Appearance purple noodle crystal
Purity 99.3% min
Chloride 0.01% max
Sulfate 0.05% max
Insoluble matter in water 0.15% max
Moisture 0.5% max
As 20 ppm max
Cd 50 ppm max
Cr 50 ppm max
Hg 10 ppm max
Pb 50 ppm max
Se 50 ppm max
Ni 50 ppm max
Sb 50 ppm max
Packing and Storage
Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Product Name: Sodium permanganate
Use level: Industrial
Content: 40 (%)
CAS Number: 10101-50-5
Molecular formula:NaMnO4
Molecular Weight: 141.93
Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate.
Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on.
Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place.
Quality Standard: Â
Items index
Sodium permanganate (NaMnO4) Content / (%) 40
Water-insoluble content / (%) 0.01
Potassium (K) content / (%) 0.22
pH value 6 ?8
Density / (g/cm3) 1.36 1.39
Chloride (Cl) content / (%) 0.02
Description: It has excellent detergency, emulsification ,and foamability, it is easy to dissolve in water. As well as favorable hard-water resistant and high-biodegradation.
Specifications:
ITEM SLES - 70 SLES - 28
Appearance Transparent or white viscous paste light yellow transparent liquid
Odor No strange odors No strange odors
Active Matter% 70�±2 28�±2
PH value 7.0-9.5 7.0-9.5
Unsulfated matter% Max. 2.0 Max. 1.0
Sodium sulfate % Max. 1.0 Max. 0.5
Microbiological(CFU/g) Max. 100 Max. 100
Dioxane(ppm) Max. 50 Max. 50
Heavy metal(ppm) Max. 10 Max. 10
Peroxide% Max. 0.1 Max. 0.1
Color Max. 10 Max. 10
Usage:
1. Used to prepare the shampoo, bath foam, soap,hand cleaner , liquid detergent and detergent.
2. Used in hard surface cleaner, such as the glass cleaner, car cleaner, they always used with the K12ã??LAS-Naã??6501.
3.Used in the textile, paper making, leather, machinery, petroleum. Industry.
Packing: plastic drum, per 160kg/170kg/200kg/220kg net weight
Loading weight in 1x20fcl:
18.24mt for 160kg drum
19.38mt for 170kg drum
17.6mt for 220kg drum
Storage: sealed and stored at the room temperature, the shelf life is two years.
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
