PRODUCTS INFO:
Type:POPULA Ventilation Industry 4-72 A Series Centrifugal Fan
Brand:POPULA
Electric Current:AC
Power:0.75-22 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:688~25736 CMH
Air Pressure:102-4152 Pa
Speed:960-2930 rpm
Max Noise:
POPULA Fan Smoke Exhaust Pipeline Centrifugal Fan Ventilation Industry 4-72 C Series Centrifugal Fan
PRODUCTS INFO:
Type:POPULA Pipeline Centrifugal Fan 4-72 C
Brand:POPULA
Electric Current:AC
Power:1.1-110 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:3684~107124 CMH
Air Pressure:220~3020 Pa
Speed:355-2240 rpm
Max Noise:
Type:POPULA Pipeline Centrifugal Fan 4-72 B
Brand:POPULA
Electric Current:AC
Power:11-200 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:35985~221730 CMH
Air Pressure:299~3157 Pa
Speed:250~900 rpm
Max Noise:
hotels, laboratories, environmental protection supporting equipment, etc.
for ventilation and exhaust of harmful gases such as acid and alkali.
However, it is not allowed to transport corrosive gases such as halogen
derivatives, ketones, etc. containing aromatic compounds, aliphatic
compounds, and aromatic hydrocarbons. It has the characteristics of
chemical corrosion resistance, low aging resistance, small specific
gravity, low mechanical vibration, low noise, and smooth operation. The
gas it transports is not allowed to contain dust and hard particles
containing viscous substances 150mg/m , gas temperature 0C,
relative humidity 100%.
PRODUCTS INFO:
Type:POPULA Fiberglass centrifugal fan PP4-72
Brand:POPULA
Electric Current:AC
Power:0.75~7.5 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:565-19083 CMH
Air Pressure:126~1550 Pa
Speed:960~1450 rpm
Max Noise:
POPULA fiberglass centrifugal fan GF4-72 A motor directly connected to FRP material
Product Introduction:
The GF4-72 Type A fiberglass centrifugal fan is a high-efficiency, high-performance, low energy consumption and environmentally friendly fan designed and improved by our company on the basis of the original 4-72 fan. This model has a more suitable appearance for gas flow performance. The GF4-72 fiberglass centrifugal fan is designed and improved based on the performance parameters of the metal 4-72 fan, and is made of fiberglass composite material. This series of fans can transport corrosive gases containing acid, alkali and chemical components. The transported gas is not allowed to contain viscous substances, dust and hard particles â?¤ 150mg/m�³, gas temperature â?¤ 60 â??, and relative humidity â?¤ 100%. This series of fans has the characteristics of high strength, light weight, non aging, good corrosion resistance, low noise, and smooth operation. It is a high-efficiency, high-performance, and low energy consumption universal anti-corrosion fan. This series of fans is widely used in chemical, electroplating, oxidation, power plants, laboratories, circuit boards, environmental protection equipment and other places containing corrosive gases.
GBF4-72 fiberglass explosion-proof centrifugal fan is made by configuring EXdl or EXdl Class A/B explosion-proof isolation type motors according to customer usage conditions. It can transport flammable and explosive volatile gases such as methane, ethane, propane, styrene, toluene, xylene, carbon monoxide, acetic acid, kerosene, gasoline, furan, etc. Its performance parameters and installation dimensions are consistent with the GF4-72 fiberglass centrifugal fan.
PRODUCTS INFO:
Type:POPULA Fiberglass centrifugal fan GF4-72 A
Brand:POPULA
Electric Current:AC
Power:0.75-15 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:580-21510 CMH
Air Pressure:230~3180 Pa
Speed:960-2900 rpm
Max Noise:
10000 Popula 4 72 A Series Centrifugal Fan Suppliers
Short on time? Let Popula 4 72 A Series Centrifugal Fan sellers contact you.
L-Valine powder, CAS No.72-18-4, essential amino acid manufactured by fermentation from carbohydrate sources. No materials of animal origin are used in the production of L-valine. Along with L-leucine and L-isoleucine, is part of the branched chain of amino acids (BCAAs). L-valine is a branched chain amino acid (as are L-isoleucine and L-leucine), which is important for supplying energy to muscles. The branched chain amino acids enhance energy, increase endurance and aid in muscle tissue recovery and repair. Branched chain preparations are used in sports nutrition and health foods.
As an experienced L-Valine manufacturer and supplier, we has been supplying and exporting L-Valine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Product Description
Categories Amino Acids
Qty in 20' FCL 20000kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
CAS No. 72-18-4
HS Code 292249
Specification Feed/Food Grade
L-Valine Specification
Specific rotation +27.6-+29.0
Heavy metals 10ppm
Water content 0.20%
Residue on ignition 0.10%
assay 99.0-100.5%
PH 5.0~6.5
STRONBULL 4-72 industrial centrifugal fan 3 Phase carbon steel air exhausting blower fan
PRODUCTS INFO:
Type:STRONBULL industrial centrifugal fan 4-72
Brand:STRONBULL
Electric Current:AC
Power:0.75-220kw
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:688-107124M3/h
Air Pressure:1210 - 3131 Pa
Speed:960r/min ,1450r/min,2960r/min
Max Noise:
Zen Bar Soap.
Available in 3 Variants : Japanese Red Shiso & Sandalwood, Japanese Red Shiso & Sea Salt, Japanese Red Shiso & Sulphur.
Packaging 72 x 80gr and 4x18x80gr (Banded 4).
Product is Manufactured by PT Bina Karya Indonesia
Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste.
Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance.
Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )
POPULA FGXF series fiberglass reinforced plastic/PP diagonal flow ventilation fan
Puduct introduce:
FGXF type fiberglass/polypropylene inclined flow fan is a drum structure, its small inlet and outlet characteristics accelerate the airflow speed, high pressure coefficient. In the case of the same model as the general axial fan, its flow rate and pressure are greater than that of the axial fan. This series of fans replace low-pressure fans, energy saving investment and footprint, simplified design, safe installation, in the axial fan pressure can not meet the pipeline ventilation occasions, the use of oblique flow fan is the best choice. It has the characteristics of light weight, good corrosion resistance, not easy to age and low noise. It is widely used in industrial and mining enterprises, hotels, museums, gymnasiums, chemical industries, laboratories, environmental protection facilities, and other places for pipeline pressure and exhaust air use. The conveyed gas is not allowed to contain viscous substances, dust and hard particles of the conveyed gas
Foshan POPULA Fan C6-46 A Dust Removal Centrifugal Fan Low Noise Ventilation and Ventilation
Product Introduction:
It is suitable to expel air with dirt , wood scraps and fine fiber . It can also be used for ventilation with the temperature of air below 80â??.Made up of 6 forward curved blades , the fan is not easy to wear and amass dirt . This series consist of A drive type , C drive type as well as D drive type.
PRODUCTS INFO:
Type:POPULA dust removal centrifugal fan C6-46 A
Brand:POPULA
Electric Current:AC
Power: 2.2~7.5 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:1183-11552 CMH
Air Pressure:568-1607 Pa
Speed:960-2900 rpm
Max Noise:
POPULA Fan HCF Centrifugal Fan I A Single Board Rear Tilting Kitchen Oil Smoke Exhaust Hotel Oil Smoke Exhaust
Product Introduction:
Impeller : Backward single-platemoeller . Convenient for clean.Noise : 10% lower than similarfans . Suitable Air : Non-hypergolicnon-corrosive , dustinesss 120mg /m�³ -20c < air temperature < 85â??.Application : Suitable for kitchen lampblack exhausting and using with smoke purifier.
PRODUCTS INFO:
Type:POPULA Single Board Rear Tilting centrifugal fan HCF-I A
Brand:POPULA
Electric Current:AC
Power:0.75-30 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:1876~51494 CMH
Air Pressure:201-4301 Pa
Speed:720-2900 rpm
Max Noise:
Cherry Olive Date Core or Seeds Removing Machine are necessary machine for fruit process .
Fruit Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi plum /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Olive Cherry Date seeds Removing Machine
Fruit seeds stone Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear stone removing machine
Longan /Automatic stone core removal machine of large-scale red date
automatic jujube type /Hawthorn / Beach date /Prunus cherry and so on ...about 20-40kind fruit can be stone removing machine
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Fruit Stone Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
10000 Popula 4 72 A Series Centrifugal Fan Suppliers
Short on time? Let Popula 4 72 A Series Centrifugal Fan sellers contact you.
