Find Verified Pneumatic Cylinder Suppliers, Manufacturers and Wholesalers

Pneumatic Cylinder
ISO 6432 Round Body
Model : SDNU
Bore Size : 12 to 25 mm
Stroke Length : upto 200mm
Action : Double Acting
Medium : Filtered and Lubricated Compressed Air
Operating Pressure : 1-10 Kgf/cm2
Operating Piston Speed : 50-1200mm/sec
Cushion Type: Fixed / Adjustable Cushioning
Port Size : M5x0.8, G1/8"

Pneumatic Cylinder
Model : ESC
SPAC Standard Tie Rod Profile
Bore Size : 32 to 250 mm
Stroke Length : upto 1000mm
Action : Double Acting
Medium : Filtered and Lubricated Compressed Air
Operating Pressure : 1-10 Kgf/cm2
Operating Piston Speed : 50-800mm/sec
Cushion Type: Adjustable Cushioning both end
Port Size : G1/8", G1/4", G3/8", G1/2", G3/4" , G1"

Pneumatic Cylinder
ISO Standard
Bore Size : 32 to 125 mm
Stroke Length : upto 1000mm
Action : Double Acting
Medium : Filtered and Lubricated Compressed Air
Operating Pressure : 1-10 Kgf/cm2
Operating Piston Speed : 50-800mm/sec
Cushion Type: Adjustable Cushioning both end
Port Size : G1/8", G1/4", G3/8", G1/2"

Pneumatic Cylinder
ISO Standard
Model : ESNC (ISO 15552)
Bore Size : 32 to 320 mm
Stroke Length : upto 1000mm
Action : Double Acting
Medium : Filtered and Lubricated Compressed Air
Operating Pressure : 1-10 Kgf/cm2
Operating Piston Speed : 50-800mm/sec
Cushion Type: Adjustable Cushioning both end
Port Size : G1/8", G1/4", G3/8", G1/2", G3/4" , G1"

Pneumatic cylinders

1) sc/su/si standard cylinder series
Accessary
2) mal/ma/mac mini cylinder series
Accessary
3) sda/sdas super thin cylinder series
Accessary
4) tn/md/stm cylinder series
Accessary
5) rotary(circumgyrate)/break(block) cylinder
Accessary

1

Medium bore size (32 to 100) series of standard tie rod cylinders. Environment-friendly cylinder that has eliminated hazardous substances. Suitable for all applications with reliable performance and a wide variety of options.

Pneumatic double acting non-magnetic cylinder used for automation process.

Our Company mainly produce highly quality pneumatic air cylinders including SI, SC Standard cylinders, SDA Thin type compact air cylinders, DNC standard cylinder and MAL Mini cylinders.

Pneumatic Cylinder Manual Override Used In Automation System.can Available From Din 50 To Din 300

Custom-made pneumatic cylinders are produced daily in our factory; in Aluminum, Brass, Steel and Stainless Steel; sizes from 10 mm to 2.000 mm; Single- and double-acting, with and without end cushioning, integrated valves or locking devices. We are highly experienced in that field and worldwide a top address for custom-made cylinders.

Pneumatic Cylinder
ISO 15552 Micky Mouse Profile
Model : SDSU
Bore Size : 32 to 100 mm
Stroke Length : upto 1000mm
Action : Double Acting
Medium : Filtered and Lubricated Compressed Air
Operating Pressure : 1-10 Kgf/cm2
Operating Piston Speed : 50-800mm/sec
Cushion Type: Adjustable Cushioning both end
Port Size : G1/8", G1/4", G3/8", G1/2",

Filled gas: Nitrogen
Color: sliver/black or as you need
Surface: spray painting for cylinder, chorme plating for piston rod
Warranty: 180000cycles
Material: finishing rolling seamless steel tube for cylinder,steel for piston rod
Quality: ISO/TS16949;ISO9001:2008
Operating Temperature Range: -15~+80ºc(5~176ºF)as standard; -50~+80ºC(-58~+176ºF) or-15~200ºC(5-392ºF)availale

Product name: scd series pneumatic cylinder
Working temperature: 0~70 degree celsius
Working speed range: 30~800mm/s
Pressure: 0.5~8 kgf/cm
Buffer type: adjustable buffer

Features of scd series standard pneumatic cylinder
1. Double rod type.
2. It's tie rod cylinder.
3. There are several modes of back cover so that the installation of clinder wil be more convenient.
4. Various sizes of cylinders and mounting accessories for your choice.
Remark: the medium used by the cylinder must be fitlered to 40 m or below.

our Pneumatic Slider Cylinder are best selling and best alternative price for your requirements. we delivery day to day for this products over domestique and overseas with month. SMC airtac MXS HMXS FESTO are our distributions products.

Features of SC Series Standard Pneumatic Cylinder:
1. Double acting type
2. It's tie rod cylinder
3. There are several modes of back cover so that the installation of clinder wil be more convenient
4. Various sizes of cylinders and mounting accessories for your choice
Note:
The medium used by the cylinder must be fitlered to 40m or below.
Product Details:
Acting Type: Double Acting
Pressure Range: 0.05Mpa--0.8Mpa(7.3--116Psi)
Working Temperature: 0--70 Degree Celsius
Cushion: Adjustable Cushion
Packing: In Cartons
Proof Pressure: 1.35MPa(195psi)
Working Speed Range: 50--800 mm/s

We have been professionally producing high quality SDA Compact cylinders for more than ten years. It can effectively minimize the space requirements.

A compact air cylinder functions in the same manner as a standard air cylinder with both single and double acting, single or double rod, and non-rotating models. However, compact cylinders minimize space requirements by allowing for precise, direct mounting in the least amount of space possible.

114729-PL-676-20 Connector Inline Pin AuXiliary Power
ADHESIVE SILICONE RTV HIGH TEMP RED C10125
Oil seal AH1001010403 BOMCO pump
338-3540 Hydraulic return circuit filter
https://www.amlppmfg.com/ay10084-2-whale-hook-assy-medium.html
Bearing 22226C 450114240088 tart drum assembly to XJ-750
Gasket Torque converter housing gasket 29503288
LOCKING DETECTOR SENSOR P/N 3301010038 E2E-X3D1-N �?12.24V
Gear wheel Z=19 E302.2.9.1.7 for XJ-450
6I-2505 ICE primary air filter
gear 29500573
Logic Element LC50B20D6X R900938033
Round dies for metric thread GOST 9740-71: M16
Stem seal 211002 for hydraulic valve 3 1/8" 5000psi Manuf MSP DrileX Model AH2504
Diaphragm NB800G.27.03.00/3NB-800F
Piston sealing ring outer FW1305.16-00
air release valve KPJ-L10
GASKET,DOOSAN,65.96601-0046A
Rear thrust flange GNZS594E-03-02
770792 CONTACT BLOCK,AUX,GPS1 SERIES
BOLT 50010-20-C5D
GASKET DOOSAN,65.96601-0067
Spare part for hydraulic release cylinder Z07150000017AA for XJ-750S
High pressure hose 10 meters ZQ203-100
"Industrial Control Transformer
CAT NO. PH350MQMJ
Primary Voltage: 400 V, Secondary: 120V
350VA, 50-60 Hz, 800 C RISE
Make: Hammond Power Solutions Inc., China"
Clamp assembly AH80101051900 BOMCO
YHSF water-cooled high temperature air pressure dust removal camera protective cover
BG322004-0222-Adjusting shim
CU1 Exde, Heavy Duty Industrial & Marine, Weatherproof
YX Ring JB/ZQ4264-97
5019715 SPACER,LOWER SPRING MOUNT,9" GRABBER
Air Ring 130mm ID XJFH5/35S-2017
BOLT: 3/8-16 UNC-2A X 20GH3101-05.15
56040822 INTERNAL AIR FILTER
LC1-D25M7C-AC CONTACTOR
Retainer die for jaw NC50-5-1/2" FH 124935
FUSE SIEMENS;3ND2 240 NH2-aM;200A/690VAC/120KVA FUSE
BC13 6201-0200 Spray pump motor
M39*3 4.10.12.051 round nut
HolderValve Stem Guide RS11306.05.26.001 F1000 Pump Spare Parts
O-ring 9090028530 for Diverter DIV37-1/2"-500
RETURNING OIL FILTER KMCL-3Y04 RFA-10X10Y
Analog soft starter for electric motors RVS-AX 170
57624780 Return filter cartridge
SEAL GLUE242
YHB40 Encapsulation Type Explosion-proof Electric Pan/Tilt
OIL FILTER SUCTION NJU-250X180F
https://www.amlppmfg.com/valve-reducing-for-tds-ps-500a-7500750.html
Screen WMONXR180J Swaco Mongoose
DERRICK FLC 2000 SHALE SHAKER PYRAMID SCREEN
Pressure reducing valve manual JYS21-25 of BOP hydraulic control station FKQ480X5
Plug 1317949 MP-16 Weatherford pump
M+C M6610 control unit for Allison M5610AR transmission to XJ-450
HAMMERSEAL UNION COMPLETE ASSY.SIZE.12" PS120A
Flange PERKIN1825667C1
GATE VALVE PN 7500PSI 2" J0252002572140
Brake kit 01.06-00
GH3101-03.11Oil seal:8.5"X10.5"X0.625"
HUMMEL circular plug connector 7680643020 ct. No 3301011350
810576 CABLE SERVICE LOOP,225/240-FT
ZJ-50/315 DB20 piston rod GH3161-28.05G
Washer 2815780721063
Harting 9370240301 shell
Cylinder pneumatic 44049.66.300
O-RING S01-1359.01N
LOWER SPACER R01-3005.010
WASHER LOCK-REGULAR 50912-C

Pneumatic Cylinder Valve A1.184.0010 Printing Offset Machine Spare Parts
Made in China
New
Sensor OPT RS PROX      00.783.0388A
Sensor EMECH SWIT POS    00.783.0675
Induction sensor     61.110.1331
Sensor INDUC SWIT PROX  61.110.1381/02
sensor     61.110.032
Sensor CAPAC SWIT PROX  61.198.1553
Sensor CAPAC SWIT PROX     61.198.1563
Front guide sensor  68.110.1322
Light barrier  91.110.1321
Sensor     C2.196.1676
Reflex light barrier    C4.110.1321
Sensor US BARR RECV     F2.161.1421/02
Sensor CAPAC SWIT PROX    F2.110.1311
Side guide sensor       F2.110.1463
Sensor INDUC MEAS PROX       M2.161.1533
sensor    M2.198.1563
Sensor CAPAC SWIT PROX    M5.122.1311/05
Slowdown Belt     C3.015.453
13mm Rib Slowdown Belt    C3.015.653
Slowdown Belt     F4.514.578
Slowdown Belt     F4.614.560/01
Slowdown Belt      F4.614.821
Slowdown Belt      F4.614.862F
Press Slowdown Belt  F4.614.881F
SM52 Press Slowdown Belt  G2.020.009
Slowdown Belt    M2.015.357-01
Slowdown Belt    M2.015.840F
Slowdown Belt    M2.015.843F
Slowdown Belt    M2.015.844F
Slowdown Belt       M2.015.845F
Slowdown Belt     M2.015.870
Slowdown Belt   M2.015.871
Press Slowdown Belt   M2.015.872/01
Slowdown Belt       M2.015.878
Offset Printing Machine Slowdown Belt      M2.015.880
Slowdown Belt     M2.015.881F
Slowdown Belt     M2.015.895
PM52/GTO52 2 Colour Drive Belt   00.270.0128
Gear Motor 71.186.5311
Small Motor 61.144.1141
Small Motor 61.144.1101
Suction drum Motor 43.112.1311
Gear Motor 61.144.1121
Register Motor L2.105.5151
Register Motor L2.105.5161
Gear Motor M5.144.1121
Gear Motor R2.144.1121
Ink Gear Motor 61.186.5311
Ink Key Motor 61.186.5311
Suction drum Motor 89.186.5151
Suction drum Motor 00.781.0658
Servo-Drive Motor F2.112.1311
Servo-Drive Motor F4.144.1151
Servo-Drive Motor 43.112.1311
Servo-Drive Motor 71.112.1311
Servo-Drive Motor 71.112.1311/02
74 Machine Register Motor 3NM IPOT L2.105.5151/02
SM74/PM74 Geared Motor M5.144.1121/02
Register Motor L2.105.5161
Servo Gear Motor M4.112.1311
Motor R2.112.1311/02
Gear Motor R2.144.1121
Motor 00.781.1882
Register Motor 89.186.5151
SM102 Machine Motor 92.112.1311
Inside Motor 61.144.1121
Offset Printing Machine Motor 61.144.121
Servo Gear Motor 61.144.1141
Servo Gear Motor L2.105.1311
Servo Gear Motor G2.144.1141
Servo Gear Motor 61.144.1161
Servo Gear Motor G2.186.5151
Servo Gear Motor G2.186.5141
Servo Gear Motor 61.144.1151
Motor CPC 81.186.5141
Register Motor CPC 81.186.5151
CD102/SM102 Machine Gear Motor 61.144.1131
Dampening Motor 61.198.1243
Motor L2.105.1311
Inside Motor 71.112.1311
Encoder 63.101.2211

Material: EN AW-6063 T6 extruded-calibrated-anodized.

Minimum mechanical Characteristics:
Rm = Mpa 245
Rp 0,2 = Mpa 200
A5% = 8
HBW = 80

Anodizing:
Anodizing thickness: class 20 m +10/-4 internal) +10/-8 (external)surface hardness of the anodizing layer: 420 HV25 +130/-30

Internal roughness:
Ra radial <= 0,6 m
Rmax radial <= 9 m
Ra axial <= 0,4 m

Brake Pneumatic Cylinder


Standard Wooden Case