Please click here to check who's online and chat with them.

Find Verified Pfa 50Ml Class A Fixed Volume Flask Suppliers, Manufacturers and Wholesalers

Oct-21-24
 
Premium Material: Constructed with high-performance PFA material, it offers outstanding chemical inertness, suitable for a variety of corrosive chemicals, ensuring long-term stability and reliability.

Precise Graduations: Precisely calibrated graduation lines provide accurate volume readings, meeting the needs of high-precision experiments, reducing errors, and enhancing the accuracy of experimental results.

Volumetric Design: The unique volumetric design facilitates quick and accurate adjustment to the desired volume, simplifying operational procedures and improving work efficiency.

High Transparency: The high transparency of PFA material allows for clear visibility of solution status, making it easy to observe solution color, clarity, and other characteristics.
Wide Temperature Range: With a broad operating temperature range, it maintains stable physical and chemical properties even under high or low temperature conditions.

Application Scenarios:
Suitable for chemical analysis, biological experiments, environmental monitoring, pharmaceutical research and development, and other fields, especially in experiments requiring high-precision volume measurements, such as solution preparation, titration analysis, sample dilution, etc.
GOLD Member
Apr-06-18

Fly Ash

MOQ: Not Specified
Supplier From Mumbai, Maharashtra, India
 
Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container
GOLD Member
Apr-01-25

Hot Selling Stylish Bamboo Cups, A

$2.50 - $3.50 / Piece (FOB)
MOQ: 100  Pieces
Sample Available
 
100% Vietnamese natural bamboo materials.
The surface is treated by a good looking polish and optional colors
Sizes and colors: as customer's request
Volume: 50ml - 1L
GOLD Member
Apr-28-22
 
- Origin: Vietnam
- Materials: 100% natural bamboo, vacuum flask 304 stainless steel.
- Size: 7.4 cm diameter x 24.5 cm high
- Volume: 500 ml
- Heat-retaining: 24 hours
- Packing: 50 pcs/ctn
- NW: 350gr/ pc
- MOQ: 300 pcs
GOLD Member
Apr-02-22
 
Silicone Foam Wound Dressing
the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing.

Information for Use:

1)clean the wound with saline.

2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely.

3)tear the face mask, Stick to the wound.

4)use the second dressing to fix (island).

Applications:
Pressure ulcer
Leg venous ulcer
Diabetic foot ulcer
First and second degree burns
Skin grafts and donor site
Post-operative and traumatic wounds
Advantages:
high absorptive volume of liquid
isolate the wound penetrent liquid from wound, reduce the infection
heal without scab,reduce the scar
promote wound healing
1451 Pfa 50Ml Class A Fixed Volume Flask Suppliers
Short on time? Let Pfa 50Ml Class A Fixed Volume Flask sellers contact you.
GOLD Member
Apr-04-22
 
Silicone Foam Wound Dressing
the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing.

Information for Use:

1)clean the wound with saline.

2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely.

3)tear the face mask, Stick to the wound.

4)use the second dressing to fix (island).

Applications:
Pressure ulcer
Leg venous ulcer
Diabetic foot ulcer
First and second degree burns
Skin grafts and donor site
Post-operative and traumatic wounds
Advantages:
high absorptive volume of liquid
isolate the wound penetrent liquid from wound, reduce the infection
heal without scab,reduce the scar
promote wound healing
GOLD Member
VERIFIED
Aug-13-22
Supplier From Jamnagar, Gujarat, India
 
Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates.
The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs.

Technical Specification:

Protein: 16% to 22%
Fat: 1.5% to 2.5%
Fibre: 24% to 32%
Ash: 2.5% to 6%
Moisture: 10% to 12%
As in reference to the supply of Alfalfa Hay, we would like to share following details related to same:


Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process.
The dry matter recovery is variable in nature. The dry matter means the hay residue of the same
The pricing will fluctuate based on the dry matter recovery.
The baling is done with a static baler in fixed size.
During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green).
Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay.
Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total.
The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology
The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments.
The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.
GOLD Member
Apr-08-25
 
PRODUCT DESCRIPTION

Volumetric Flask Flask with I/C Glass  Stopper, Class A, Accuracy as per USP(US
pharmacopoeia ) & alibration @20 CManufactured from 3.3 Low Expansion Borosilicate Amber glass
Comes with Penny Head Solid Glass Stopper
5 to 20ml Supplied with TRAPEZOIDAL shape for better Stability.
Each flask with Unique serial number & Individual work Certificate

Product code: 261

Minimum Price(USD): 6
Maximum Price(USD): 35
VERIFIED
Jun-01-21
 
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982

DESCRIPTION :

* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.

FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature

AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5

NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock

Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7

Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
VERIFIED
Jun-01-21
 
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982

DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.

FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature

AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5

NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock

Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick

Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
GOLD Member
VERIFIED
Jun-22-24

Wood Pellets 6Mm In 15Kg Bags For Heating System

$70
MOQ: 10  Tons (UK)
Sample Available
Supplier From Ontario, Canada
 
Class A1 Pine Wood Pellets 6mm DIN+ plus & ENplus A1/A2 ( BSL Approved Wood Pellets In 15kg bags )
We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in
Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous.

Excellent Wood Pellet Standard

Ash amount: 0.7% max
Moisture: 10% max
Diameter: 6 mm-8mm
Length: 10mm-50mm
Made from pure wood , no bark
Bright, uniform surface color
No horizontal or vertical cracks
Density: 650kg/m3 min
calorific value: 4100 to 4500 kcal/kg
Uniform size: quality in production
Clear in water cup test
Non Toxic Fumes
Zero Additive
Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers
choice with desired logo.

80% pine - 20% beech (white) pellets
Diameter: 6 mm
Lenght: < 30 mm
Humidity: < 10%
Calorific value: 4300 +/- 0,05 Kcal/kg
Sulfur: < 0,03%
Ash content: < 0,7%
Additives: < 2%

Pine wood pellets 6mm
4-40mm lenght,
moisture <10%,
Ash content 1% -1.5%,
Lower heat Value 4150 Kcal / kg,
higher heat value 4800 Kacal / kg
May-17-24
 
PFA (fluororesin) volumetric flasks can meet A-level volumetric standards and are designed with integrated molding without welding. The bottle mouth is sealed with threads to ensure its sealing performance and prevent liquid leakage. Can tolerate organic solutions such as strong acids and bases. Can be used for reagent adjustment in water quality detection and ICP analysis.
#volumetricflask #labbottle #labware #ICPMS
Apr-10-24
 
Multiple specifications available: 10, 25, 50, 100, 250, 500, 1000ml.
Compared with glass, it is more resistant to falling and less likely to break, and has a longer service life. The inner wall is smooth and non-stick.
GOLD Member
Apr-10-24

Piroctone Olamine Cas 68890-66-4

$5
MOQ: 1  Kilograms
Sample Available
 
Piroctone Olamine is a broad spectrum of microbiostat, maybe used in for mulating antidandruff, shampoo, hair keep and hair care, soap, etc. mainly used in Cosmetic raw materials, detergent raw materials, hair care chemicals, oral care minerals chemicals. an anti-dandruff active ingredient, soothes inflamed scalp and reduces flaking. It has a specific action against Pityrosporum Ovale, the agent responsible for the production of dandruff.
Anti-dandruff products containing piroctone Olamine can destroy fungal dandruff, prevent the formation of new dandruff, keep the scalp clean, itchy and prevent the formation of new dandruff.


Function

Effective antidandruff, antifungal activity, reduce dandruff shedding

Volume of use: 0.1-1.0% for flushing type products, 0.05-0.2% for non-washing products.

Commonly used in hair care, skin care, sunscreen, and oral care etc.



Application

Antidandruff hair keep: 0.1-0.8% active ingredient.

Antidandruff fixing agent: 0.05-0.2% active ingredients.

Antidandruff hair emulsion: 0.1-0.3% active ingredients.

Antidandruff hair supporting: 0.05-0.1%active ingredient.

Preservative: 0.2-0.5% active ingredient

Smell-eliminating agent: 0.2-0.5% active ingredient

Smell-eliminating scented soap: 0.2-0.5% active ingredient.
GOLD Member
VERIFIED
Oct-04-24
Supplier From Hong Kong, Hong Kong
 
Hydolys Group is pleased to offer premium-quality Thermal Coal directly from a world-class mining operation up to 4 million MT of coal with high calorific value and highly competitive pricing. We guarantee consistent quality and full compliance with international standards, making our product ideal for industrial, energy, and infrastructure applications.

Product Specifications :
- Available Quantity : up to 4,000,000 MT
- Calorific Value (NCV) : 5,300 - 5,500 kcal/kg
- Total Moisture (ARB) : Max 14.0%
- Volatile Matter (ARB) : Max 20.0%
- Ash (ARB) : Max 23.0%
- Sulphur (ARB) : Max 1.0%
- Hardgrove Grindability Index : 45-70
- Nominal Top Size : 50 mm
- Initial Deformation Temperature (IDT) : Min 1,150C (reducing atmosphere)
- Origin : Democratic Republic of Congo - Indonesia - Australia
- Destination : CIF Any Safe World Port (ASWP)

Why Choose Hydolys Group?
- Direct Mine Access No intermediaries, best pricing guaranteed
- Massive Volume Capacity Reliable supply for large-scale operations
- Flexible Contracts Spot deals or long-term agreements tailored to your needs
- Global Logistics Expertise Timely and secure delivery to any ASWP

We would be happy to discuss your requirements in detail, including pricing, payment terms, and logistics. Let's work together to provide you with a solution that is fully aligned with your operational needs. For more info, visit : https://www.hydolysgroup.com/thermal-coal

Contact Information :
- Email : contact@hydolysgroup.com
- Email : huguesdohy@hydolysgroup.com
- Whatsapp : +33 06 47 19 22 95

Address :
- 233 Hollywood Road, Hong Kong
- 2 Marina Boulevard, Singapore


================================
OTHER PRODUCTS
================================

Metals & Non-Ferrous :
- Copper Cathodes
- Copper Powder
- Copper Ingot
- Thermal Coal
- Gold
- Nickel
- Iron Ore
- Cobalt
- Chrome
- Magnetite
- Antimony
- Flourite
- Manganese
- Lead
- Tin
- Aluminium


Agricultural :
- Cocoa
- Coffee
- Arabic Gum
- Black Pepper
- Spices

Other :
- Cement
- Iron Pipes
- Motor Oil
- Hydraulic Oil
GOLD Member
Jul-04-24

Cantique True Beauty Hair Perfume

$10.50
MOQ: 1000  Pieces
Supplier From Busan, South Korea (Republic Of Korea)
 
- An in-care hair perfume that protects and nourishes hair
- Nourishing ingredients to care for damaged hair and cuticles
- Non-greasy, moisturising fine mist
- Official NAVER WEBTOON licensed product

* Specifications:
- Type: Hair Perfume
- Volume: 50ml
- MOQ: 1,000EA
- Made in South Korea
VERIFIED
Apr-26-20

Boiling Flasks

$1
MOQ: Not Specified
 
1111 Boiling Flask, Flat Bottom, Boro 3.3 Glass
Description: Boiling flask is globe shape but flat bottom, used for boiling operations, these flasks are made of heat resistant borosilicate glass and may be exposed to flame. The flasks are not graduated. They are often used with condenser, seperatory funnel and so on. The flasks also make unique decorative storage containers. Often used in laboratory .Used for heating, boiling, purify and distilling.
There are 18 sizes available, 25ml Flat bottom Boiling flask, 50ml, 100ml Flat bottom Boiling flask, 125ml Flat bottom Boiling flask, 250ml Flat bottom Boiling flask, 300ml Flat bottom Boiling flask, 500ml Flat bottom Boiling flask, 1000ml Flat bottom Boiling flask, 2000ml Flat bottom Boiling flask, 3000ml Flat bottom Boiling flask, 4000ml Flat bottom Boiling flask, 5000ml Flat bottom Boiling flask, 6000ml Flat bottom Boiling flask, 10000ml Flat bottom Boiling flask,15000ml Flat bottom Boiling flask, 20000ml Flat bottom Boiling flask,50000ml Flat bottom Boiling flask.
Material: Boro 3.3 Glass
Color: Clear Glass
Selling points: heat resistant borosilicate glass storage containers.

1115 Boiling Flask, Round bottom, Boro 3.3 Glass
Description: Narrow neck round bottom boiling flask is Made of special Borosilicate glass (Bore 3.3) that has excellent chemical and physical properties. Stable structure with great mechanical strength and high resistance against chemical attacks; Withstands high thermal shock.Used in chemical industry, petrochemical industry, biochemical pharmaceuticals, laboratory and education.
There are 18 sizes available, 25ml Round bottom Boiling flask, 50ml, 100ml Round bottom Boiling flask, 125ml Round bottom Boiling flask, 250ml Round bottom Boiling flask, 300ml Round bottom Boiling flask, 500ml Round bottom Boiling flask, 1000ml Round bottom Boiling flask, 2000ml Round bottom Boiling flask, 3000ml Round bottom Boiling flask, 4000ml Round bottom Boiling flask, 5000ml Round bottom Boiling flask, 6000ml Round bottom Boiling flask, 10000ml Round bottom Boiling flask,15000ml Round bottom Boiling flask, 20000ml Round bottom Boiling flask,50000ml Round bottom Boiling flask.
Material: Boro 3.3 Glass
Color: Clear Glass
Selling points: High transparency
VERIFIED
Apr-26-20
 
1121 Erlenmeyer flasks, narrow neck, with graduation, Boro 3.3 Glass
Description: This flask is made of borosilicate 3.3 glass for durability and chemical-and temperature-resistance, and its uniform wall thickness provides mechanical strength for shock-resistance. Borosilicate glass has a low coefficient of thermal expansion and is resistant to thermal stress. Boiling flasks provide uniform heating of liquids for quality testing, sampling, and research in chemistry, education, research, and life science applications.
There are 14 sizes available. 5ml Erlenmeyer flasks, 10ml conical flask, 25ml Erlenmeyer flasks, 50ml Erlenmeyer flasks,100ml conical flask, 150ml Erlenmeyer flasks, 250ml Erlenmeyer flasks, 300ml Erlenmeyer flasks, 500ml Erlenmeyer flasks, 1000ml Erlenmeyer flasks, 2000ml Erlenmeyer flasks, 3000ml conical flask, 5000ml, 10000ml conical flask.
Material: Boro 3.3 Glass
Color: Clear Glass
Selling points: High transparency heat resistance high quality

1120 Erlenmeyer flasks Wide Neck with Graduation DIN 12385

5009 Conical Flask, Standard ground mouth
Description: This flask is conical and with standard ground mouth.
There are 30 sizes available: 5/10 standard ground mouth conical flask, 5/14 standard ground mouth conical flask, 10/10 standard ground mouth conical flask, 10/14 standard ground mouth conical flask, 10/19 standard ground mouth conical flask, 25/10 standard ground mouth conical flask, 25/14 standard ground mouth conical flask, 25/19 standard ground mouth conical flask, 50/14 standard ground mouth conical flask, 50/19 standard ground mouth conical flask, 50/24 standard ground mouth conical flask, 100/14 standard ground mouth conical flask, 100/19 standard ground mouth conical flask, 100/24 standard ground mouth conical flask, 100/29 standard ground mouth conical flask, 150/19 standard ground mouth conical flask, 150/24 standard ground mouth conical flask, 250/19 standard ground mouth conical flask, 250/24 standard ground mouth conical flask, 250/29 standard ground mouth conical flask, 250/34 standard ground mouth conical flask, 500/19 standard ground mouth conical flask, 500/24 standard ground mouth conical flask, 500/29 standard ground mouth conical flask, 500/34 standard ground mouth conical flask, 1000/24 standard ground mouth conical flask, 1000/29 standard ground mouth conical flask, 1000/34 standard ground mouth conical flask, 2000/29 standard ground mouth conical flask, 2000/34 standard ground mouth conical flask.
Material: Boro 3.3 Glass
Color: Clear
Key Product Features:
1.High quality
2.Preferential price
3.Excellent service
GOLD Member
Oct-14-24

Sodium Metasilicate Anhydrous

$1.50K
MOQ: 27  Metric Tonnes
Supplier From North York, Ontario, Canada
 
Sodium Metasilicate Anhydrous is a white, free-flowing, granular powder, which is used in many cleaners, detergents, and soap formulations. It is an effective cement binding agent, coagulant , dye fixative, binder, corrosion inhibitor, and penetrating sealant.
Sales Specification

Na2O: 50.50 ±1.00%
SiO2: 46.50 ±1.00%
Fe: 200 PPM Max
Bulk Density: 1.05-1.35 g/cm3
Particle Size (18-60 Mesh): 93.00% Min
Whiteness: 85.00 Min
Packing

50 lb bag, 44 bags per pallet.
DOT Transportation

UN/NA: 3262
Proper Shipping Name: Corrosive Solid, Basic, Inorganic, n.o.s. (Sodium metasilicate, Anhydrous)
Hazard Class: 8
Packing Group: II
GOLD Member
Aug-01-24
 
Certification
BRC

,
FDA

,
FSSC22000

,
GMP

,
HACCP

,
HALAL

Manufactured by
NAM VIET Foods & Beverage JSC

Minimum Order Quantity
300 cartons

Packaging
Can (Tinned)

Shelf Life
24 Months

Payment method
L/C

,
MoneyGram

,
Paypal

,
T/T

,
Western Union

Primary Ingredient
Instant Coffee

Supply ability
600 Twenty-Foot Containers per month

Volume
320ml

The Ultimate Guide to 320ml VINUT Keto Coffee Drink with Collagen

Are you a coffee lover who wants to stay fit and healthy while enjoying your daily caffeine fix? Look no further than 320ml VINUT Keto Coffee Drink with Collagen! This innovative beverage combines the delicious taste of coffee with the health benefits of collagen and the ketogenic diet
1451 Pfa 50Ml Class A Fixed Volume Flask Suppliers
Short on time? Let Pfa 50Ml Class A Fixed Volume Flask sellers contact you.
Explore Pfa 50Ml Class A Fixed Volume Flask related import export discussions