Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
Pipe Fittings Metals offered for making butt-weld pipe fittings:
Monel, Nickle, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalam, Bismuth, Aluminium, High Speed Steel, Zinc, Lead Etc
Size: 1/8" NB TO 48" NB (Seamless & Welded)
Wall Thickness: Sch.5S to Sch:XXS.
Balaji Impex offers a premium range of PVC Pipes & Fittings, designed for durability, high performance, and leak-proof connections. Made from high-quality PVC material, they are corrosion-resistant, lightweight, and easy to install. Ideal for plumbing, drainage, and irrigation systems, our pipes and fittings ensure efficient water flow and long-lasting reliability for residential, commercial, and industrial applications.
Polished 304 Stainless Pipe is a standard stainless pipe that has been polished to a 180 Grit Brushed Finish on its exterior for cosmetic and ornamental applications. Unlike the dull mill finish of standard stainless pipe, this polished stainless steel pipe allows your projects to have a more finished look with excellent corrosion resistance making it ideal for handrails, architectural design, restaurant and store fixtures, trade show displays, marine components and more. Just like standard stainless pipe it has an interior weld seam.
Origin:Unites States
Code: 2025820BN
Material: HDPE pipe PE4710 shredded Black
Category: HDPE
Type: pipe PE4710 shredded
Color: Black
Quantity:36 Tons
Loading weight: 18 Tons
Specification:"HDPE pipe PE4710 shredded black
MFI: 0.3
Unwashed. But clean. No dust, no oil.
Sizes are 0.5 inch to 1.5 inch
PE4710 and PE100 are both grades of high-density polyethylene (HDPE), but PE4710 is derived from PE100 and offers higher performance, particularlyin pressure applications. PE100 has similar or lower physical property requirements than PE4710, while PE4710 has stricter design factors andadditional performance requirements.
Key Differences:
Performance Requirements: PE4710 has higher performance requirementsincluding better resistance to slow crack growth (SCG) and rapid crackpropagation (RCP) compared to PE100.
Packing: Jumbo bags
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: United States
Code: 2025882BN
Material: HDPE PE100 pipe cutting Black
Category: HDPE
Type: PE100 pipe cutting
Color: Black
Quantity: 16 Tons
Loading weight: 80 Tons
Specification: "HDPE PE100 pipe cutting, PIR
Loading weight 16~20tons/load
Monthly 20loads
Packing bulk into containers
On going shpts"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: United States
Code: 2025820BN
Material: HDPE pipe PE100 shredded Black
Category: HDPE
Type: pipe PE100 shredded
Color: Black
Quantity: 36 Tons
Loading weight: 18 Tons
Specification:"HDPE pipe PE100 shredded black
MFI: 0.3
Unwashed. But clean. No dust, no oil.
Sizes are 0.5 inch to 1.5 inch
Packing: Jumbo bags
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
GOOD GRADE OCC WASTE PAPER SCRAP MADE IN USA GRADE 11 AND 12
Place of Origin : JAPAN, US, EUROPE
Materials : Waste Paper
Type : OCC, ONP, OMG, YELLOW PAGES, A3, A4 WASTE PAPER
Color : Mixed & NOT MIXED
Unit : Ton/Tons
Minimum Order : 20 Tons
Payment Term : T/T 50/50 and L/C 100% at sight
Shipping Lines : Ocean shipping
Estimate Lead Time : 15 - 20 days
Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach
Supplying Capacity : 200 tons/month
Packaging : Bale (1.2-1.4 Tons/Bale), 20-25 Tons loading 40FT container
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
