FEATURES
Compliant with IEEE802.3bt
90W output power on 4-pairs
Data Rate: 10/100/1000Mbps
Full protection for OCP, OLP, and OVP
LED indication for power and POE status
2-Pair PDs received power on 2-Pairs
Automatic Detection and Protection of Non standard Ethernet Terminals
This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project.
Main Feature:
Supply power to wireless access points and surveillance cameras over cat-5 cabling.
24 -Port 10/100/1000Mbps Data input
24 -Port 10/100/1000Mbps Data + Power output
industrial MeanWell power supply built in
passive 24v POE 4/5+,7/8-
Remote power feeding up to 100 meters
1U rack design, suitable for cabinet-mounted
Scalable Solution
The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet
to support additional terminals, providing a simple, cost effective method for expanding the network.
Easy to Use
The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet
terminals and supply inline power.
Single-port Ethernet power supply equipment, which is suitable for indoor use, can work normally from 100VAC to 240VAC input voltage. The power supply and network terminal equipment are connected by over five types of cables. It has an Ethernet data port and an output port after data and power combination. This device can provide POE power supply applications in line with IEEE802.3af/at international standards for all Ethernet devices, such as routers, switches, wireless AP, network telephones, industrial network terminals, network cameras, etc. It can also provide efficient engineering in places where power supply cannot be provided remotely or where power supply by Ethernet network lines can be used to improve system reliability and simplify equipment installation.
Solest 68 is a formulated ISO VG68 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 68 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Soles lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Rotary, Centrifugal, Scroll Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 68, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 68 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
236 Passive Poe Injector Single Output 52Vdc 90W Poe Suppliers
Short on time? Let Passive Poe Injector Single Output 52Vdc 90W Poe sellers contact you.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently
return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning
compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning
compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. This
grade offers excellent resistance to dilution in HFC refrigerants.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently
return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a
controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 180 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment,
as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced downtime
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field.
Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR
1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field.
Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently
return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a
controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection.
Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
China PoE Injector for IP Cameras
Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.
PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd
injecteur poe Specifications
Parameter Description
Key Features Industrial PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
Gigabit data rates
12-48VDC input make it possible for solar application
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GB-E
Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 1/2(-),3/6(+)
Output Power Voltage: 55Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 12 to 48Vdc
DC Input Current: 8.0A
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 144.5mmX 95mmX 35.4mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Yellow
Warranty 2 year
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
poe injector 60w
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter PoE Injector for camera Description
Key Features Wall-mounted
Part Number PT-PSE106GW-AR-D
Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input DC Input Voltage: 36 to 72 Vdc
DC Input Current: 2.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 380gï¼?13.4ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals CE/FCC
PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case.
PoE Injector for information kiosks
After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks.
PoE Injector for POS
For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.
We are PoE supplier
PoE Injector for information kiosks Specifications
Parameter Description
Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
1000Base-FX to 10/100/1000Base-TX
SFP slot for Multi mode or Single mode SFP transceiver
Gigabit data rates
12-48VDC input make it possible for solar application
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GBS-E
Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 3/6(+),1/2(-)
Output Power Voltage: 55Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 12 to 48 Vdc
DC Input Current: 8.0A
PoE Injector for door locks
PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection
PoE Injector for displays
Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
PoE Injector for information kiosks
Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc.
PoE Injector for IoT application Specifications
Parameter high quality PoE Injector Description
Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
1000Base-FX to 10/100/1000Base-TX
SFP slot for Multi mode or Single mode SFP transceiver
Gigabit data rates
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GBS-D
Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 3/6(+),1/2(-)
Output Power Voltage: 50-57Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 50-57Vdc
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*1, SFP slot*1
Size:144.5 X 96 X 35.4mm
Weight: 485gï¼?1.1lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Green
SFP fiber indicator: Green
PoE data indicator: Yellow
Warranty 2 year
