Find Verified Paper Slitting And Rewinding Machine Suppliers, Manufacturers and Wholesalers

Main Parameters:
Model Paper slitting machine RYFQ-1600
Technical parameter Control system
Max width mother roll 1600mm PLC Controller Delta(Taiwan)
Min-width finish roll 35mm Main-machine interface WEINVIEW6070i
Max-diameter mother roll 1500mm Tension sensor Hz100kg
Max-diameter finish roll 1300mm Actuator CHNT
Speed of Slitting 0-300m/min Signal component Omron
Slitting capability 60-700gsm Pneumatic component Airtac
winding way Air expansion winding Program edition RYS-RS2.0
Slitting knife Could up to 18sets Inverter YASKAWA 15KW
Paper giving way By hydraulic clamping Length sensor Have
speed regulation control Inverter outfit assemble
Power input According to customer require Loading material Hydraulic clamping type
Size (mm) L*W*H Unloading material Pneumatic
Unwinding machine 3600 *1600 *1200mm Edge correcting motor Y11 60:1
Rewinding machine (B)3000*1600*1200mm
(C)2450*1200*800mm Count meter Automatic
Up-knife specification 2*110*75mm Tension adjust magnetic powder brake
Down-knife specification 4*110*75mm rewind double airshaft
Total weight 5050kg Slitting by clipper,
Drive system Magnetic powder tension control system
Mainframe power 15KW Enclosed component
Mainframe wheeling speed 1400r/min Air compressor no
Liquid compression motor 1.5kw Useful tool have
Way of correcting edge Hydraulic
Driving way Chain driving
Bearing Wanxiang

Technical Parameters:
Model RYFQ-900 RYFQ-1100
Material thickness: 0.012-0.5mmfilm30-350gpaper
Max. Diameter of Raw material: 800mm
(can choose the separated stand, which max. Can put 1400mm)
Paper core: 3#
Max. Effective width of raw material: 800mm 1100mm
Min. Width of Rewinding: 10mm(paper), 5mm(film)
Width of Slitting: 20-800mm
Max. Diameter of rewinding: 500mm
Error-correction length: 150mm
Precision: ±0.15mm
Max. Speed: 350m/min
Slitting speed: 10---350m/min
Total power: 12.5KW
Total weight: 3000KG
Dimension: 2800mm*3400mm*1400mm 3000mm*3400mm*1400mm
Slitting tools: 20sets Standard (can inform the width you want to make, so that we can set the knife basic before send to you)
Upper slitter dimension:
105*75*1.2mm
Brand: shanghai shenlong
Bottom round cutters dimension:
80*20*16mm
Brand: shanghai shenlong
Rewinding shaft 4pcs of air shaft
Diameter of aluminum roller 100mm

Introduction:
This machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc. it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, it also has the function of meter can be setup in advance and auto stop working, etc.

Main Technological Parameters:
1. Width: 1100mm
2. Thickness of material: 20g/m2~500g/m2 decided according to the material
3. Max diameter of raw material: �?600mm
4. Max diameter of rewinding: �?150mm
5. Width of material:

Main Parameters:
Model Paper slitting machine RYFQ-1600
Technical parameter Control system
Max width mother roll 1600mm PLC Controller Delta(Taiwan)
Min-width finish roll 35mm Main-machine interface WEINVIEW6070i
Max-diameter mother roll 1500mm Tension sensor Hz100kg
Max-diameter finish roll 1300mm Actuator CHNT
Speed of Slitting 0-300m/min Signal component Omron
Slitting capability 60-700gsm Pneumatic component Airtac
winding way Air expansion winding Program edition RYS-RS2.0
Slitting knife Could up to 18sets Inverter YASKAWA 15KW
Paper giving way By hydraulic clamping Length sensor Have
speed regulation control Inverter outfit assemble
Power input According to customer require Loading material Hydraulic clamping type
Size (mm) L*W*H Unloading material Pneumatic
Unwinding machine 3600 *1600 *1200mm Edge correcting motor Y11 60:1
Rewinding machine (B)3000*1600*1200mm
(C)2450*1200*800mm Count meter Automatic
Up-knife specification 2*110*75mm Tension adjust magnetic powder brake
Down-knife specification 4*110*75mm rewind double airshaft
Total weight 5050kg Slitting by clipper,
Drive system Magnetic powder tension control system
Mainframe power 15KW Enclosed component
Mainframe wheeling speed 1400r/min Air compressor no
Liquid compression motor 1.5kw Useful tool have
Way of correcting edge Hydraulic
Driving way Chain driving
Bearing Wanxiang

Introduction:
This slitting machine is used for slitting and rewinding various large rolling materials such as paper,(20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ-900B RYFQ-1100B RYFQ-1300B
Max. width of unwinding 900mm 1100mm 1300mm
Max. diameter of unwinding �¦600mm �¦600mm �¦600mm
Width of slitting 20-900mm 20-1100mm 20-1300mm
Max. diameter of rewinding �¦400mm �¦400mm �¦400mm
Speed 5-150m/min 5-150m/min 5-150m/min
Deviation-rectifying Error �±0.5mm �±0.5mm �±0.5mm
Total power 3kw 3kw 3kw
Weight (approx. ) 1500kg 1800kg 2100kg
Overall dimension(LxWxH) 1100x1600x1400 (mm) 1100x1800x1400 (mm) 1100x2000x1400(mm)

Introduction:
This machine is used for slitting and rewinding various large rolling material in thickness 40g/m2-300g/m2, such as paper, paper sticker, film, pvc, opp, bopp, PET, Aluminum foil et

Main Parameters:
Model RYFQ-1300C
Max width of unwinding 1300mm
Max diameter of unwinding 1400
Min. width of slitting 30mm
Max. diameter of rewinding 600mm
Max Speed 350m/min
Total power 22KW
Power supply 380v.50hz
Weight 4500kg
Overall dimension (LXWXH) 2700X2800X2000mm

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ- 1100C RYFQ- 1300C RYFQ- 1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding �¦1400mm �¦1400mm �¦1400mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding �¦500mm �¦500mm �¦500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting �±0.2mm �±0.2mm �±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight(approx) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Introductionï¼?
This Slitting and rewinding machine is widely used for slitting white board paper, carbon-free paper, coated paper, two-side offset paper, etc. It is high speed with 400m/min which can cut 30-510gsm paper and other film materials

Main Parameters:
Material type: white board paper, carbon-free paper, coated paper, two-side offset paper, etc.
Material thickness: 30-510gï¼?paperï¼?
Max. Diameter of raw material: 1800mm
Raw material paper core: 3#, 6#
Max. Width of raw Material: 1800mm
Min. Width of Raw Materialï¼? 400mm
Roller surface width: 1850mm
Width of slitting: 40-1800mm
Rewinding paper core: 3#
Max diameter of rewinding: 1500mm
Error-correction length: 150mm
Precision: �±0.15mm
Max. Speed: 400m/min
Slitting speed: 10-400m/min
Total power: 52KW
Total weight: 18000kg
Dimension: 7500mmx4200mmx2300mm
Slitting tools: 10 sets for standard, also can do according to customerâ??s requirement.
Upper slitter dimension: �¦160*100*50mm Brand: shanghai shenlong
Bottom round cutters dimension: �¦150*120*40mm Brand: shanghai shenlong
Rewinding shaft with 2pcs of 3# air shaft, recycle using.
This equipment is with 13pcs if �¦120 aluminum roller, 1pcs of rubber roller and 1pcs of steel roller.
With 2pcs of round cutter shaft

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Main Parameters:
Paper: 50-600g/m2
Effect working Width: 2200mm
Design speed: 400m/min.
Paper leading model: Down-side leading.
Working speed: 300m/min.
Max. diameter of Raw paper roll: 2000mm
Max. Diameter of Finished paper roll: 1500mm

Introduction:
This high speed paper slitting rewinding machine is used for slitting and rewinding various large rolling materials such as paper, (20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device.

Main Parameters:
Model RYFQ-1100E RYFQ-1300E RYFQ-1600E
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding �¦1400mm �¦1400mm �¦1400mm
Min. width of slitting 10mm 10mm 10mm
Max. diameter of rewinding �¦500mm �¦500mm �¦500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting �±0.2mm �±0.2mm �±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight(about) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Introduction:
This high speed paper slitting rewinding machine is used for slitting and rewinding various large rolling materials such as paper, (20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device.

Main Parameters:
Model RYFQ-1100E RYFQ-1300E RYFQ-1600E
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding �¦1400mm �¦1400mm �¦1400mm
Min. width of slitting 10mm 10mm 10mm
Max. diameter of rewinding �¦500mm �¦500mm �¦500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting �±0.2mm �±0.2mm �±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight(about) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Main Parameters:
Paper: 50-600g/m2
Effect working Width: 2200mm
Design speed: 400m/min.
Paper leading model: Down-side leading.
Working speed: 300m/min.
Max. diameter of Raw paper roll: 2000mm
Max. Diameter of Finished paper roll: 1500mm

Introduction:

This machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc. it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, it also has the function of meter can be setup in advance and auto stop working, etc.



Main Technological Parameters:

1. Width: 1100mm

2. Thickness of material: 20g/m2~500g/m2 decided according to the material

3. Max diameter of raw material: 600mm

4. Max diameter of rewinding: 150mm

5. Width of material:

Main Parameters:
Model RYFQ-900B RYFQ-1100B RYFQ-1300B
Max. width of unwinding 900mm 1100mm 1300mm
Max. diameter of unwinding 600mm 600mm 600mm
Width of slitting 20-900mm 20-1100mm 20-1300mm
Max. diameter of rewinding 400mm 400mm 400mm
Speed 5-150m/min 5-150m/min 5-150m/min
Deviation-rectifying Error ±0.5mm ±0.5mm ±0.5mm
Total power 3kw 3kw 3kw
Weight (approx. ) 1500kg 1800kg 2100kg
Overall dimension(LxWxH) 1100x1600x1400 (mm) 1100x1800x1400 (mm) 1100x2000x1400(mm)

Introduction:
This slitting machine is used for slitting and rewinding various large rolling materials such as paper,(20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ-1300C
Max width of unwinding 1300mm
Max diameter of unwinding 1400
Min. width of slitting 30mm
Max. diameter of rewinding 00mm
Max Speed 350m/min
Total power 22KW
Power supply 380v.50hz
Weight 4500kg
Overall dimension (LXWXH) 2700X2800X2000mm

Introduction:
This machine is used for slitting and rewinding various large rolling material in thickness 40g/m2-300g/m2, such as paper, paper sticker, film, pvc, opp, bopp, PET, Aluminum foil et.

Main Parameters:
Model RYFQ-1100C RYFQ-1300C RYFQ-1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 700mm 700mm 700mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 600mm 600mm 600mm
Speed 10-160m/min 10-160m/min 10-160m/min
Precision �±0.2mm �±0.2mm �±0.2mm
Total power 7kw 7.8kw 8.5kw
Suitable power supply 380v/50hz 380v/50hz 380v/50hz
Weight (approx.) 2100kg 2300kg 2600kg
Overall dimension
(LÃ??WÃ??H )(mm) 2850Ã??2200Ã??1350 2850Ã??2350Ã??1350 2850Ã??2650Ã??1350

Introduction:
This machine is used for slitting and rewinding various large rolling materials such as
paper, (20g/-200g/) cellophane paper, bill paper, double-face adhesive tape, PVC, Al ,foil,weave material, non-woven of cloth, BOPP, OPP, PET etc.

Main Parameters:
Model RYFQ- 1100C RYFQ- 1300C RYFQ- 1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 1400mm 1400mm 1400mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 500mm 500mm 500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting ±0.2mm ±0.2mm ±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight(approx) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Introduction
This Slitting and rewinding machine is widely used for slitting white board paper, carbon-free paper, coated paper, two-side offset paper, etc. It is high speed with 400m/min which can cut 30-510gsm paper and other film materials.

Function description:
Unwinding part
Adopts shaftless hydraulic fixing system, easily for one person operation. Using special conic node system from 3 to 6 for durable using. The 2 sides clamping arm are controlled by the hydraulic dovetail groove linear guideway. 2pcs of hydraulic clamping oil cylinder moves to each side at the same time, easily operation.
2pcs of hydraulic type loading and unloading material oil cylinder can bear 3T material to save the manpower and time.
It does not need to input the material thickness, the proximity switch can inspect the unwinding diameter directly which near the transmission shaft. The machine can slow down according to the rest material, in this way, the worker can prepare for the next roller. The unwinding tension adopts the sensor close-cycle automatic tension, controlled by PLC.
With the manual adjustment system, the unloading material tightness can be controlled. The adjustable range: +/-20mm
Automatic error-correction for the edge position is controlled by the CCD photographic system. The whole frame adopts guide way type to move left and right which driven by the servo motor. The moving part uses thread screw.
Pneumatic material connecting device, with the square steel structure, adopts the way of pneumatic and rubber pressing roll to save the material
Bridge type feeding materials
The unwinding adopts the Italy pneumatic braking.
Precision proportional valve use SMC

Main body part
The bare frame uses the 80# casting material, easily for dismounting and transportation.
The transmission combines the servo motor with synchronous wheel speed ratio.
Automatic traction device adopts pneumatic pressure way. The servo motor drives the mirror roll.
Close-cycle vector control.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, around 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.