1310/1550 dual-wavelength testing;
Visible light source, facilitate to inspect fiber break;
Complete PC analysis software for you to quickly and efficiently generate a professional OTDR reports;
Easy to operate, both the touch-screen panel and keyboard button can completely operate the equipment, meeting different operator¡¦s habits;
All important tests can provide a hotkey to operate automatically, to ensure higher test efficiency;
3.5-inch TFT LCD with brightness adjustment support, suit for high luminance environment and night;
With auto-sleep function to save power;
NI-MH battery-powered, low-voltage protection, continuous working time up to 8 hours;
Hardware power switch, thorough stop electrical energy loss, ensures the battery can work longer;
We Dodem self design and make OTDR
DT630 series handhold OTDR is mainly used for the following tests:
Determine fiber optic cable or fiber optic¡¦s failure point, connection point, breakpoint position
Describe fiber optic cable or fiber¡¦s loss distribution curve, measure cable, fiber¡¦s length and the loss, attenuation coefficient between two points
Measure fiber optic cable, optical fiber connector¡¦s insertion loss
Measure fiber optic cable, optical fiber¡¦s reflection loss;
DT630 series handhold OTDR can be widely used in metropolitan, WAN, CATV and other communication systems for fiber optic cable or fiber installation, troubleshoot, transformation and maintenance.
Specifications:
Source type: LCD
Connector type: FC (SC, LC)
Wavelength: 1310nm 1550nm
Fiber type: single mode
Attenuation Dead Zone: 6m
Event deadzone: 4m
Dynamic Range: 28dB
Maximum test distance: 80Km
Data storage capacity: 180 test curve
Size: 220mm¡Ñ110mm¡Ñ70mm
Data storage capacity: 180 test curve
Size: 220mm¡Ñ110mm¡Ñ70mm
Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed. Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
ST3200 OTDR (Optical Time Domain Reflectometer) is an intelligent optical fiber communication tester. This tester is easy to use and portable, which has a 3.5-inch color LCD touching screen. It also possesses events intelligent analysis and more user---friendly operation.
It is an ideal test instrument for the fiber testing and troubleshooting. It can test the length of optical fiber and optical fiber cable attenuation coefficient. It can exactly display the loss distribution curve of the optical fiber and cable as well as the loss between two points and the joint loss. It also can test the distance between two points and the position of joint, fault point as well as breaking point. This tester has VFL (Vision Fault Locating) system. So it becomes convenient to test the fault location of jumper wire.
Main functions:
* Test the distance between two points and dynamically display the distance between two cursors
* Test the loss between two points and the loss constant of the optical fiber and cable
* Test the joint loss
* Auto-optimization and quick response
* Search for the event points automatically
* The function of wave form storage: it can store the wave form data and test condition into the disk and the stored information also can display again.
* Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly.
Snp-18c palm otdr is the newest instrument designed for testing fttx network. It is mainly used to measure the physical characteristics of optical fiber, such as the length, the transmission loss and the splice loss etc. It can also locate the faults or breaks of optical fiber. It is widely applied in the manufacture, construction and maintenance in optical fiber communication system.
Features:
Small, powerful and portable
Battery powered
3.5 inch tft-lcd can meet the needs of high luminance environment and night.
Be with simple and friendly graphical user interface.
Touch screen panel and keyboard button can meet different operator's habits.
Hotkey for rapid testing, and just press the hotkey you can obtain the required operational test results.
Provides three power saving modes, close the lcd screen, equipment sleep and power-down, continuous working time up to 8 hours
1310/1550 dual-wavelength testing
Visible light source, facilitate to inspect fiber break
Complete pc analysis software
Easy to operate
Application:
Determine fiber optic cable or fiber optic's failure point, connection point, breakpoint position.
Describe fiber optic cable or fiber's loss distribution curve, measure cable, fiber's length and the loss, attenuation coefficient between two points
Measure fiber optic cable, optical fiber connector's insertion loss
Measure fiber optic cable, optical fiber's reflection loss
Be widely used in metropolitan, wan, catv and other communication systems for fiber optic cable or fiber installation, troubleshoot, transformation and maintenance.
AV® 6416 Palm OTDR
Makes OTDR measurement simple and intelligent with its one–button function.
Description:
With a short 1.6m dead zone the AV® 6416 is designed for FTTx application. It can test the length, fiber loss connector loss and other physical characteristics of fiber. it can locate events on fiber cables precisely. It is really the tool of choice for FTTx application installation and maintenance as well as for fiber R&D and producing testing. AV® 6416 rugged design, lightweight and easy operation, as well as the low-reflection LCD and more than 10 hours battery life make it be perfect in filed testing. Meanwhile, Its two USB interfaces help to store and transfer traces easily and conveniently.
Features:
1. Applicable fiber: Single mode
2. Built-in Visible Fault Locator (VFL)
3. 1.6m extra-short event dead zon
4. Wavelength: 1310/1550nm±20nm
5. Dynamic Range: 28/26dB .
6. Distance Range: 4,8,16,32,64,128,256km
7. Pulse with: 10,30,80,160,320,640,1280,5120,1024ns
8. Loss threshold: 0.01dB
9. Universal connector FC/SC/ST
10. Memory capacity >800 traces
11. Interface: USB, mini USB
12. Display: Color LCD
13. One year Warranty.
SF2011 ( Mini OTDR ) Optical Fiber Ranger
By using the method of Optical Time Domain Reflection technology, the SF-2011 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2011 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users.
Features:
1,Portable, rugged, lightweight; Easy to use.
2,Built-in visual fault locator (VFL), conveniently to find the faults in dead zone.
3,Long battery life, up to 5000 measurements operation.
4,Automatic Pulse Width Control design to ensure a convenient operation.
5,Testing the distance of the fiber and identify the faults location in the fiber link.
6,Locates reflective and non-reflective breaks in the fiber network.
7,Support USB to transmit the data.
Specification:
Connector Type: FC/APC FC/PC
Light Source: FP laser diode
Wavelength:1550nm,1310nm
Fiber Type: 9/125um single mode
Precision:¡À10m(Reflection point),¡À200m(No reflection point)
Minimum dead zone: 10m
Max distance: 80km 50km
Resolution: 0.001km
Display unit: km
VFL
Wavelength: 650nm
Power Out: 1mW
Connector Type:Universal Connector
Battery
Battery Type: 2 AA alkaline battery
Continuous operating time(@25¡ãC):>1000times or VFL continuous working 10hours
Auto power off: 3min
Environmental
Operating temp: 0¡ãC to +40¡ãC
Storage temp: -20¡ãC to +70¡ãC
Humidity: 0 to 95%(no frozen)
Physical
SUN Telecoms SUN-OT5000 Handheld OTDR Series is more compact and user-friendly. The hotkey feature enables convenient events review and analysis. SUN-OT5000 Handheld OTDR Series supports averaging and real-time test on single-mode (1310/1490/1550/1625nm) and multimode (850/1300 nm) fibers and complies with various connector types. With í¦TraceManagerí¦ software, you can download trace files from OTDR to PC for further analysis, reporting and printing.
Features:
SM/MM models available
Dynamic range selectable: up to 45dB
Model SUN-OT5000-1625S3: 1625nm wavelength for PON system
Quick startup: < 5 seconds
Hotkey feature: easy operation, events review and analysis
High precision measurement, large internal memory
TraceManager software: easy batch editing and single-page multi-trace printing
Visible fault locator: fast locating failures anywhere in the network
Enhanced power performance: up to 8 hours continuous operation with one charge
Handy and smart: only 1kg (2.2 lbs)
Safe and rugged: 2-meter drop test passed
Multilanguage
1.Light weight, hand-held, easy-to-use
2.Measure rang up to 30kmíó50kmíó80km
3.Tolerance of measurement is 0.02%
4.Maximum 5 fault events display
5.5 digits of decimal lcd dispaly
6.Red light fault detector is compatible
7.Auto-shut down in 5 minutes
8.Using two aa alkaline batteries, low battery annunciator
Application:
1.Fault location of fiber networks;
2.Fiber length measurement;
3.Fiber networks construction and maintenance;
4.Optical communication system;
5.Fiber catv networks;
6.Security and surveilance system;
7.Fiber lan or pigtail jumper project
The P5 is a high performance mini-OTDR, which is small in size, light in weight and rugged in configuration. It has a large color LCD and a USB interface. It also features a long battery operation life. With the P5 series OTDR, you can measure unit/connection/transmission loss and locate faults or breaks on optical fibers. It is widely applied in the manufacture, construction and maintenance of optical fibers.
Features:
42/40dB high dynamic range
Rugged
1.6m short event dead zone
High quality touch screen
0.1m sample resolution with 65534 sampling points
Offer Chinese and English interface
Deep memory for data storage
Transmit data to PC by serial or parallel interfaces
Battery operation life over 8 hours
Intelligent battery capacity display
USB interface
Write/read file in Bellcore GR196 file forma
We try to supply otdr similar to Yokogawa otdr, Anritsu otdr, EXFO otdr, JDSU otdr, Ideal Networks otdr
Standard Package:
Instrument, FC/PC Connector, Lithium Battery, Trace Manager Software CD, Data Cable , AC adaptor, Soft carrying case, Warranty card, CE certificate, Certificate of calibration, Quick reference guide.
Delivery:
by air
Payment:
T/T,D/P,L/C etc
After sales:
After sales team with 10 members to serve you any time.
MOQ:
1 pc
Techwin (China) is the leading manufacturer and supplier of test and measurement for thewireless and wireline communications in the world. Our products cover not only forresearch, development and manufacturing, but also for installation.
Techwin (China) offer complete fiber cable products, such as fusion splicer, fiber cleaver,OT DR, power meter, laser source, cable fault locator, fiber identifier, visual fault locator,optical fiber talk set, PON power meter, optical variable attenuator, optical tool kit, fiberpatch cord, PLC splitter, fiber coupler, splice on connector, fast connector, fiber cable,ADSS, OPGW and thermal stripper etc.
Q2:What's your best price?
A:Based on the quality of our products and the quantity of your estimated. We would quote the great best matching price all the time.
Q3:Why choose us to cooperate?
A:1. We have first-class production line and strict quality management system.
2. We have professional procedure system and big production capacity to guarantee fast deliver and on time shipment.
3. We can provide the most competitive price to meet your budget.
4. We also design and innovate the new products based on our rich experience .
5. We have professional team to provide comprehensive one-stop service for you.
Q4:If u can accept small trial order?
A:Yes,Small trial order can be available also,But u should pay 100% T/T down payment in advance.
Q5:Can u offer discount ?
A:Yes,discount available on large order.The larger the order,The more discount we will offer.
Q6:What is ur delivery time?
A:Usually,Delivery will be made within 2 weeks after down payment;If order is very large,3 weeks or 4 weeks we will need.
Technical Specifications1
Wavelength (nm) 1310/1550
Dynamic range (dB)2 38/36, 32/30
Pulse width (ns) 5,20,40,80,160,320,640,1280,2560,5120,10240,20480
Event blind zone (m)3 2m
Attenuation blind zone (m)3 9m
Linearity (dB/dB) ±0.05 dB/ dB
Loss threshold (dB) 0.05
Loss resolution ratio (dB) 0.01
Sampling resolution ratio (m) 0.125 to 8
Sampling point 32K
Distance uncertainty (m) ±(1 m + 510-5 distance + sampling interval)
Distance scope (km) 0.3 to180
Typical real-time refreshing duration (s) 0.2
Memory capacity of trace SD Card (2G), > 10000 pieces
Duration of measurement Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
General specification
Dimension (HWD) 15023566
Weight 1.5kg
Temperature Running temperature -10 to 50
Memory temperature -40 to 70
Relative humidity 0% to 95% (non condensation)
Power supply Lithium battery; continuing working duration ?¥ 8 hours
Warranty period 12 months
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by the minimum pulse width.
Techwin Handheld Tester OTDR TW3100E with Automatic Measurement Mode
We will try our best to provide products similar to Yokogawa OTDR, Anritsu OTDR, EXFO OTDR, JDSU OTDR, Ideal Networks OTDR.
Introduction
1.Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
2.Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
3.Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
4.Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
5.FTTx online testing, able to identify the splitter and the fibers end.
6.Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours.
7.Bellcore file format (.sor), with the storage of greater than 10,000 traces.
8.Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.
