Product Description
4/8E PDH is developed based on the VLSI chips. Relying on the advanced multiplexing technique, 4/8E PDH realizes 4/8 E1 and 100Mb/s fast Ethernet transmission with the function of Auto-Laser-Shutdown (ALS,optional).
Technology Characteristics
-> Transmits 4/8 E1 and one wire speed Ethernet
-> Line bit rate is 150Mb/s
-> Complies with ITU-T G.703 on interface and G.742, G.823 on jitter performance
-> Complies with ITU-T G.802.3 on Ethernet interface and supports auto-negotiation for 10M/100M and half/full duplex working mode
-> Supports VLAN and pause follow control for Ethernet
-> All necessary alarm functions, supervises the status of remote terminal
-> Supports E1 tributaries loop back for network fault diagnostics
-> Supplies standard order wire telephone
-> Supplies one customer RS232 data channel
-> Supplies RS232 for equipment management
-> AC 220 or DC-48 is optional
-> Single board design, 1U, and 19 Inch standard
Optical interface:
-> Transmit Mode : Single/ Multi-mode
-> Module : Single/Double Fiber
-> Interface : FC/SC/ST
-> Wavelength : 1310nm/1550nm
-> Distance : 2Km/40Km/60Km/120Km
E1 interface:
-> Bit rate : 2.048Mb/s , í+50ppm
-> Impedance : 75ª+ unbalanced(Declaration is needed if 120ª+ balanced required)
-> Coding: HDB3, according to ITU-T G.703
-> Jitter: complies with ITU-T G.823 and G.742. Seeing appendix
Ethernet interface:
-> 10M/100M through auto-negotiation
-> Full/Half duplex through auto-negotiation
-> Connector: RJ-45
-> See appendix for Throughput, Packing error rat, Delay, and others
Order wire interface:
-> Phone set: Standard 2-wire phone set
-> Bandwidth: 64Kb/s
-> Coding: PCM
RS232 for management:
-> Bit rate: 9600b/s
-> Data width: 8bits
-> Stop bit: 1bit
-> Parity check bit: None
-> Connector: DB9 (pin)
RS232 for customer data channel:
-> Bit rate: í_250kb/s
-> Connector: DB9(pin)
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 483í-200í-44mm
-> Net Weight : 2.5Kg
Provides 4e1/8e1/16e1 the g.703 connection
Realizes long-distance monitoring of this end equipment to the far-end equipment
Provides function of ordering 4e1/8e1/16e1 to loop return from the remote end, fiber self-loop at local end; and provides a group service telephone interface (to select)
Three power supplies: dc-48v, dc+24v or ac220v
Transmitting range: 2-120km
The double filament bidirectional and the single filament bidirectional type may select
Conforms to the telecommunication level operation
Requirement, and does not have the fault time equally (mtbf) above 100, 000 hours
Single fiber transmission able to multiplex 18 CWDM channels (Not many competitors can do 18CH CWDM over 1 single fiber), usually connected at the BBU
â?¢ Single fiber Optical Add and Drop of CWDM channels (available with 3CH/ 4CH/ 6CH/ 9CH), usually connected at the RRU
Provides 4e1/8e1/16e1 the g.703 connection
Realizes long-distance monitoring of this end equipment to the far-end equipment
Provides function of ordering 4e1/8e1/16e1 to loop return from the remote end, fiber self-loop at local end; and provides a group service telephone interface (to select)
Three power supplies: dc-48v, dc+24v or ac220v
Transmitting range: 2-120km
The double filament bidirectional and the single filament bidirectional type may select
Conforms to the telecommunication level operation
Requirement, and does not have the fault time equally (mtbf) above 100, 000 hours
DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance.
DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
15613 Optical Multiplexer Suppliers
Short on time? Let Optical Multiplexer sellers contact you.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.
We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.
The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.
We have various Whitening Agent Optical Brightener Available for Paper application like...
Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.
We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.
The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.
We have various Whitening Agent Optical Brightener Available for Paper application like...
Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.
Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.
Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.
We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.
The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.
We have various Whitening Agent Optical Brightener Available for Paper application like...
Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.
BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper.
It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system.
It Should be applied prior to either alum or cationic auxiliaries.
Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on:
- Type of furnish
- Base pulp pH and brightness
- Desired brightness and whiteness gain
1.Certificated by ROHS,FCC and CE .We can supply all kinds of video digital optical converter,and other fiber optical equipments according to your special requirement. Please feel free to contact us any time with your specifications.
2. If you want to Convert analogue composite videos such as VHS.Beta,DVD,DVR,or TV programs to Digital Files onto your SD Card or SDHC card;then view files on your computer or a digital device clearly.Pl choose us. We will supply the most appropriate, the best cost-effective products for you.
3. application for this product include CCTV,video surveillance,homeland security,ITS and etc.
4. Adopt TDM,ADM,CWDM technicals, Especially applicable for the enviroment where it is not convenient for the wiring.
5. Professional Manufacturer OEM service offered. High Quility Reasonable Price
Features
1. Multiplexer Transmit and converter 6 kinds of signals: Video, Digital, Switch (Alarm), Audio, Ethernet, Phone etc.
2. Digital, uncompressing optical fiber transmission platform)
3. Fiber interface: ST/FC/SC optional
4. Special design matching circuit for Light source module, Low heat,
5. Special Lightning protection design.3 core in interface decompose the High voltage, Low voltage, static.
6. Special Broadband power design. AC 220V,DC-48V,24V,12V,6V,5V optional. Low Power consumption.
7. PAL,NTSC,SECAM Compatible
8. Power,Video/Digital presence, Fiber Status Indicating LED¡¯s to monitor Systems.
9. Support stand-alone wall hung and 1U/2U/4Urack-mount optional
10. Ultra wide range of temperature(-40¡ãC---85¡ãC), adapt to the more environments.
11. High stability,without debugging, without any site electrical, optical adjustment.)
12. 3 Years Warranty
13. Wavelength: 1310nm/1550nm
Technical index
1.Max capability:4 channels(10g) , 8channels(20g), 18channels (180g, full wave fiber)
2. Range of wave length: fully compatible with itu-i g.695 standard
3. Operation access type: pdh, atm, stm-16/stm-4/stm-1, oc-48/oc-12/oc-32, ethernet 10/100baset, ge, ficon/escon/fiber channel
4. Fiber optic port transmission type:155mbit/s, 622mbit/s, 1.25gbit/s, 2.5gbit/s;
5. Fiber type:g.652, g.653, g.655
6. Transmission distance:30km, 50km, 80km optional
Optical line index
1. Center wavelength:1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
2. Space of wavelength:20nm
3. Light through bandwidth:+- 6 nm
4. Center wave of transmit temperature excursion:0.08nm-0.1nm
5. Transmission power of each wave:-5dbm~+3dbm
6. Receiving power of each wave: -22dbm~-3dbm
7. Receiving sensitivity:<-24dbm
8. Connector: line port fc, user's end: sc
9. User's end wavelength:single-mode:1200nm~1610nm, multi-mode:850nm
10. Fiber optical patch cord: g.652 g.653 g.655 single-mode
Dimension
Standard 19" chassis, 1 u height
Power supply
1. Ac power supply: 220vac +-15% 50hz
2.Dc power supply:-24vdc with +16v~+32v;-48vdc with -36v~72v
3.Power consumption:< 18w
Working environment
1.Operating temperature: -30 ~ +70 degree
2. Storage temperature: -40 ~+85 degree
3.Environment humidity: 5-90%(non-condensing)
4.Atmospheric pressure: 86-106kpa
DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION
Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature
Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for
cotton (terry-towel) & blend.
Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2
bleach.
Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2
bleach.
Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach.
TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature
Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder -- Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder (B) -- Padding & Exhaust at medium temperature
Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White BVN Powder
(BB Supra) --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White HI Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White S Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature
HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature.
Bridgeo Milky White HF Liquid
(UF AS LIQ) -- Padding and exhaust at low temperature.
Bridgeo Milky White BSU Liquid 264 Padding and exhaust at low temperature.
Bridgeo Milky White AS Powder --
Suitable for Acid Cross Linking, Padding and exhaust at
low temp, reddish tone
DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION REMARKS
Bridgeo Milky White BA 267% Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BMK Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White SRK Powder 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BHT-HC Powder 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BHT-HC Liquid 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White UP-HC Liquid 113 Suitable for virgin and wood pulp at
alkaline pH.
Bridgeo Milky White UP Liquid 113 Suitable for virgin and wood pulp at
alkaline pH.
Bridgeo Milky White UF-UP Liquid 113 Suitable for virgin and wood pulp at
alkaline pH. Urea & Salt Free
TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Used in Waste Paper & Straw Pulp in acidic to
neutral pH.
Bridgeo Milky White ABP-X Powder 220 Mostly used in Waste Paper Pulp in acidic to
neutral pH.
Bridgeo Milky White UF-P Liquid 220 Mostly used in Pulp Board & Tissue in acidic to
neutral pH.
Urea &
Salt Free
Bridgeo Milky White ABIZ Liquid 220 Used in Tissue from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White API Liquid 220 Used in newsprint from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White ABP Liquid 220 Used in newsprint from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White SI Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH.
HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Used in Size Press & Coating, at any pH. Urea &
Salt Free
Bridgeo Milky White HF Liquid -- Used in Size Press & Coating, at any pH. Urea &
Salt Free
Bridgeo Milky White BSU Liquid 264 Used in Size Press & Coating, at any pH for extra
bluish whiteness
Urea &
Salt Free
Bridgeo Milky White MST Liquid 353 In Board Machine at Coating for reddish shade Urea &
Salt Free
Bridgeo Milky White BSUT Liquid 264 Used in Size Press & Coating for violetish
blue shade
Bridgeo Milky White AS Powder -- Used in Size Press & Coating.
DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION
Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature
Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for
cotton (terry-towel) & blend.
Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach
TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature
Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder -- Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder (B) -- Padding & Exhaust at medium temperature
Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White BVN Powder
(BB Supra) --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White HI Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White S Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature
HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature.
Bridgeo Milky White HF Liquid
(UF AS LIQ) -- Padding and exhaust at low temperature.
Disulpho Group
PRODUCT NAME C.I. NO. AREA OF APPLICATION REMARKS
Bridgeo Milky White BA 267% Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BMK Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White SRK Powder 252 Suitable for recycled pulp at wet end at alkaline pH.
Bridgeo Milky White BHT-HC Powder 252 Suitable for recycled pulp at wet end at alkaline pH.
Bridgeo Milky White BHT-HC Liquid 252 Suitable for recycled pulp at wet end at alkaline pH.
Bridgeo Milky White UP-HC Liquid 113 Suitable for virgin and wood pulp at alkaline pH.
Bridgeo Milky White UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH.
Bridgeo Milky White UF-UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH.
Urea & Salt Free
TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Used in Waste Paper & Straw Pulp in acidic to neutral pH.
Bridgeo Milky White ABP-X Powder 220 Mostly used in Waste Paper Pulp in acidic to neutral pH.
Bridgeo Milky White UF-P Liquid 220 Mostly used in Pulp Board & Tissue in acidic to neutral pH.
Urea & Salt Free
Bridgeo Milky White ABIZ Liquid 220 Used in Tissue from Waste Paper in acidic to neutral pH.
Bridgeo Milky White API Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH.
Bridgeo Milky White ABP Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH.
Bridgeo Milky White SI Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH
HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free
Bridgeo Milky White HF Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free
Bridgeo Milky White BSU Liquid 264 Used in Size Press & Coating, at any pH for extra bluish whiteness
Urea & Salt Free
Bridgeo Milky White MST Liquid 353 In Board Machine at Coating for reddish shade Urea & Salt Free
Bridgeo Milky White BSUT Liquid 264 Used in Size Press & Coating for violetish blue shade
Bridgeo Milky White AS Powder -- Used in Size Press & Coating.
A leading recycler of polymers like pp granules, gpps / eps granules, hips granules, abs granules and many more in india with having strong foundation and having great experience in the same field.
an iso 9001 2015 certified company located in gujarat, western part of india.
highly professional establishment with improved and new theme of international business in recycling business like omniscient is generating good response from international market. we stand ahead in this line on the basis of quality, reliability and durability of our products. that is why, in this era of high moral, latest business styles and professional touch, we are able to satisfy well by supplying qualitative products..
Optical brighteners, also known as fluorescent whitening agents (FWAs) or optical brightening agents (OBAs), are chemical compounds used in various industries, primarily in textiles, paper, and detergents. These substances absorb ultraviolet (UV) light and re-emit it as visible blue light, making colors and whites appear brighter and more vivid. Optical brighteners are often added to laundry detergents to give the illusion of cleaner and whiter clothing by enhancing their visual brightness. They are also used in the paper industry to improve the brightness and whiteness of paper products. Optical brighteners' ability to improve the appearance of materials under certain lighting conditions makes them valuable in enhancing the visual quality of a wide range of consumer and industrial products.
15613 Optical Multiplexer Suppliers
Short on time? Let Optical Multiplexer sellers contact you.
