The mileage-correction tool is a matured programming device for mileage adjustment at digital odometers. It is not only for mileage-correction at different vehicles, it is also possible to repair comfortably and accomplished digital clusters.
PLCs have the central control role in various fields, including manufacturing and public systems, and in service fields. They can be used to construct optimal small and large-scale systems.
Features:
It is newest version 1/2008, which Fully support European, American and Asian vehicle types, most of which can be adjusted via OBD-II diagnostic plug.
1. BENZ A/C/CL/CLK/E/G/M/SL/SLK class (before 2000) New E/C class adopt CAN cable technology, cluster-socket operation (no need to adjust EIS/EZS)
2. Most of BMW 3/5/7/8/X/Z class vehicles, include operation on EWS, LCM can be adjusted via OBD-II diagnostic plug.
Mercedes benz star2000 (version 2007) is the professional diagnostic equipment for mercedes benz manufactured after year 2000. It is the replacement of hht. Star2000 operate based on the windows xp system. It includes workshops information system(wis), the movement management system (star utilities) and the automatically diagnose system(das). It can enter all the benz cars, such as autobus truck, saloon car, sports car, smart car and so on.
Das/wis/star finder/epc.
This diagnostics software allows you to perform complete diagnostics of all from 1995 until present models. Diagnostics is performed via obd-ii connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Main features:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly all the functions like the original dealer diagnostic tool. Our diagnostic interface contains k-line multiplexer, can-bus interfaces and sae j1850 bus (both pwm and vpw).
Gt1 is supplied with a pentium based laptop pc on a windows platform connected to a high specification communications and measurement interface.
Bmw group tester one (version 2.1) is offered to the aftermarket in the same specification that is currently supplied to bmw franchised dealers. It is special-purpose tool of bmw series.
Gt1 can complete coverage of all bmw systems, one thing that can only be done using the gt1, this function is called electronic control unit (ecu) programming and configuration. Many of the original electronic systems on modern vehicles can now be reprogrammed using software; historically any changes to rectify software problems would involve a new ecu which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems.
The vehicle communication module (vcm) is a high performance, rugged, vehicle serial communications gateway. This device provides multiple vehicle serial communication interfaces to meet the requirements of all ford motor company vehicles.
The vcm unit is housed in a magnesium enclosure with a tough, protective, plastic cover for the pcmcia expansion slot which can, for example, be used for wireless lan cards or memory expansion.
The vcm device contains five led status indicators to provide the user with a visual mode of internal vcm, vehicle, and host device (e.G. Ngs classic's t-handle, pc, pocket pc/pds, and laptop/ids) operation.
Toyota Denso Test 2:
(DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags, even through Communication Diagnosis DST- 2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional.
Easy operation on LCD display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and Oscilloscope Not only communication basis diagnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your PC saved data such as data-list can be downloaded to your PC.
All type of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II.
Toyota denso it2 character:
1. Touchscreen & back lighting control
2. Easy & quick
3. User needn't worry about the after service since factory has an open patio for maintenance.
Toyota Tester2 Main Unit Specification:
Dimensions: 145mm (W) x 223mm (H) x 71mm (D)
Weight: Approx. 1380g
Source Voltage: DC10-32V
Power Consumption Normal: 7W (12VDC), Charging: 10W (12VDC)
Operation Temperature: 0~45C
Storage Temperature: -10~60C
LCD display: 5.7 inch color STN (320x240), transparent type of 256 colors Adjustable brightness/contrast
Touch panel Input: by finger or stylus pen
Key: 4 (up, down, two function keys)
Built-in clock for a time stamp
PC Communication: PC card slot CFx1ch (CF standard type I, II)
USB Host: 1ch.
Toyota Denso IT2 Function:
1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 .Back up power supply: Lithium-ion battery 7.4v 1000mAH Recharge hour ( at normal temperature) Approximate operating time: 5 hours ( fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range ( vertical scale) 1V/div, 2V/div, 5V / div Time range ( horizontal scale) 100ms / div, 200ms / div, 10s / div Oscilloscope Function Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range ( vertical scale) 100mV / div, 200mV / div, 500mV / div ~10V / div Time range ( horizontal scale) 5us / div, 100us / div, 200us / div, ~10s / div( 200ms and higher is the Roll mode)
Toyota denso IT2 Package List:
- Mainframe -- 1pc
- OBD-II -- 1pc
- Charging line -- 1pc
- Lin line -- 1pc
- Measuring leads for multimeter 1 -- 1pc
- Measuring leads for multimeter 2 -- 1pc.
After sale service:
1) Free update during one year
2) Free repair and maintenance service in one year
3) Free technical support by internet or via phone.
OverviewL
Autocom CDP Pro is a PC based OBD II diagnostic tool with full functionality for reading and erasing diagnostic fault codes (DTC), real-time data, activations of components, adjustments and so on. CDP Pro supports 16 pole (J1962) diagnostic socket and handles all known communications standards for vehicle diagnostics.
Software version:2011.1
Autocom CDP Pro CARS (Compact Diagnostic Partner ) CARS
Autocom diagnostic tools are intuitive, fast and user friendly!
Description:
The CDP Pro database offers a deep OBD2 generic and manufacturer specific coverage of European Cars like MB, BMW, Audi, VW, Porsche, Volvo, SAAB, Jaguar, Land Rover etc, and very good coverage of Japanese and North American Cars. For diagnostics in older pre-OBD2 cars, Autocom supplies specific OBD1 cables.
The CDP Pro database is translated to several languages and is frequently updated.
Autocom uses Original Data from vehicle manufacturers to guarantee the best quality and functionality. Wireless communication is included in all of Autocom"s diagnostic products.
The user can also add extra options such as repair information, service schedules and electrical diagrams from external suppliers, which can be connected to the program with ready to use links.
Functions:
-Manufacture specific serial diagnose
-Scan function
-EOBD/OBDII communication
-Serial Systems
-Engine
-Ignition
-Climate
-ABS
-Service reset
-SRS
-Immobilizer
-Instrument
-Comfort system
-Gear-box etc.
Specification:
1. Full Translate Language :
English , Cesky, Dansk, Deutsch, Espanol, Francais, Greek, Hollands, Hungarian, Italiano, Norsk, Polish, Romania,Russian, Srpski, Suomen kieli, Svenska, Turkish
2. Autocom CDP Pro features
-User-friendly and intuitive software for passenger cars, light and heavy commercial vehicles and buses
-Fast and safe identification of vehicles and systems with the aid of Autocom ISI (Intelligent System Identification)
-Intelligent System Scan (ISS) function - automatically scans through all the vehicle"s control systems
-Bluetooth and USB connectivity are standard
-Software available on CD/DVD and the Internet for PCs, or SD-card for handheld PCs
-Quick and easy installation
-Handles all current communications standards for vehicle diagnostics
-Help texts for available functions
-Reading and erasing fault codes
-Reading real-time data
-Restoring service messages
-Programming capabilities such as injectors, keys, remote controls etc
-Unique multiplex technology, which minimizes the need for special cables
3. In serial we do following:
-Read and erase fault codes
-Read live data
-Basic settings
-Programming
-Scan function
-Fully compliant to the eOBD/OBDII standard.
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.!
Features & Benefits:
1. Designed for sprinkler standards NFPA 13, 15 and 16.
2. Dual hazard operation.
3. Cross-zone (double-interlock) capability.
4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit).
5. Optional Digital Alarm Communicators
