Nylon is a synthetic material which is the most used material in the market today. It is capable of being extruded into strands of various sizes and thicknesses to suit different applications. Our nylon filter mesh is woven by monofilament yarns. The key properties of nylon filter mesh include:
High tensile strength
Light weight
Elasticity and flexibility
Resistance to acids, alkalis, corrosion, dust, temperatures, and wear
Hydrophilic
Good moisture absorption
Soft, smooth feel
Easy cutting, dyeing, and cleaning
In addition to its availability in many designs and configurations, nylon mesh offers a number of other key advantages over alternative filter mesh options. For example, its smooth surface facilitates the removal of filtered solids, making it an effective and efficient solution for pool filters and skimmers.
Nylon fibers can be knitted into durable mesh suitable for different straining, sieving, and filtering applications.
Collection of Cells and Algae
Particle Analysis
Large Particulate Filtration
Background Filter for automated particle imaging system
Pre-filtration of Solvents
Paint Monitoring
Medical Filtration (Blood Filtration)
Food & Beverage
Primary bag air filter, also called pocket air filter,is made of three parts: the filter frame, sewn-in pockets and pocket rings, and it is commonly used in the first or second stage of the filtration system.
Primary bag air filters can be designed in various sizes and also can be produced with various pockets or bags. Because of its special design, it can offer more than five times surface area than flat filter. A multilayered, melt-blown polypropylene medium is used to make the individual pockets. To ensure that the air flow is distributed evenly across the entire filter, pockets are made to inflate and stay apart from one another.
Primary filters are intended to catch floatable particles larger than 5 microns. While it is possible for the primary filter to capture what the pre-filter captures, doing so would significantly decrease the efficiency and efficacy in capturing the tiny airborne particles. This pocket type filter will not be distorted, or twisted when used normally, thereby extending the service life of the product. Every pocket is fully sealed, so it can avoid any dust or air leaks.
Advantages
Longer service life due to low initial pressure drop.
Widely available in a variety of sizes, pocket counts, and pocket materials.
For varied purposes, there are many different and broad filtering efficiencies available.
Simple to use, maintain, and take away.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Air Bleed Screen Filter Mesh Formed Filters Screen Filter Air Bleed Filters & Baskets
Plastic Filters
Formed Filters FEATURES
Screen Filter Air Bleed
Air bleed replacement kit
This is a custom filter screen product made according to customer requirment.
YMX Filters accept filters according to customer's sample or drawing. We also help with the designing of the filter products.
This filter screen features in the plastic injected frame. Plastic injection frames on filters is an ideal solution to help get a filter product strong, easy, and cheap.
YMX FILTER MANUFACTURING CO., LTD is a custom fabricator of series of wire screen, cone strainers and woven wire cloth products. For more than 20 years' experience, we are serving customers from a wide range of industries from all over the world.
If you are interested in custom wire screen, you can click here to browse our website.
Frame material : Galvanized frame/ Aluminum alloy frame/ Stainless steel frame
Frame thickness:10/21/46/96 etc
Filter material:aluminum wave nets/stainless steel nets
Maximum temperature:above 250â??
Maximum humidity:100%
Optional aluminum depth 7~96mm
Efficiency:G1 G2 (EN779)45%~95%@0.5�¼
Customized size: Available
Packing : Inner packing is carton ,outer packing is pallet
Port: Qingdao
SPECIFICATION
The metal mesh pre air filter adopt multi-layer expanded aluminum foil mesh or stainless steel mesh and the metal mesh is pressed into undulations and intersect each other at appropriate angles
Metal meshes are arranged from thick to fine according to density and pore size, thus increasing the dust collection capacity and filtration efficiency. The initial resistance is lower than 20Pa.
APPLICATION
1.The metal mesh pre air filter can used for clean room conditioning system ,pre-filtration through fresh air venting units ,and exterior air conditioning connection .
2.Primary filtration for central air conditioning system .
3.Pre-filtration at the intake of Air purification equipment .
4.Primary filtration in a filtration system .
5.Ventilation system for outdoor and other harsh environments.
6.Pre-filtration in Ventilation system for outdoor fire-proof and high temp resistance working condition .
compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
* First stage: two stainless steel orifice tubes provide 10 micron mechanical separation
* Second stage: in-depth fiber media captures solid and liquid particles to 3 micron
2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
* Firt stage: captures larger particles with alternate layers of fiber media and media screen
* Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media
3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: multiple layers of bonded, blended fiber media for fine coalescence
* Second stage: multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve
4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser
* Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence
Outer coated, closed cell foam sleeve
5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor
* Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor
Multiple layers of fine media prevent particle migration
Outer coated, closed cell foam sleeve prevents fiber migration
Designed life is 1000 hours under rated conditions.
Application: ¡Ý5¦Ìm , Filter dust (especially used in the train or the subway, where the place has air-conditioner),
pre-filter through air filter program
Type: pads or rolls size
Media: synthetic fiber with gradual density,
Washable: about 2-3 times
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
