Nrs Star Phase Inflatable Sup Board Wholesale Suppliers, Manufacturers & Distributors

$538.30

MOQ: MOQ: Not Specified

Water Sport Equip

Supplier From Singapore, Singapore, Singapore

Supplier Of Toys & Games

Water Sport Equip

Supplier From Singapore, Singapore, Singapore

Supplier Of Toys & Games

From family fun to fitness paddling, from lakes to rivers, the fun and stable NRS STAR Phase Inflatable SUP Board is the perfect all-around SUP for paddlers who like to mix things up. Available in three sizes to suit nearly any paddler, the Phase is equally capable for touring, fitness paddling, families and light river running. Advanced materials and construction create a lightweight board that's easy to transport to and from the water. PVC-coated drop-stitch material inflates to a fully rigid 20 psi (1.38 bars) for superior paddling performance, then folds up for compact transport and storage. Textured foam deck pad provides comfortable, no-slip footing as you paddle. Top-quality Leafield D7 inflation/deflation valve for unsurpassed reliability. Sturdy webbing handle in the center of the board for easy carrying. Four stainless D-rings on the nose give you options for attaching gear. Includes one 9" (22.9cm) fin, travel bag, high-pressure pump and repair kit.

What is Drop Stitch? It's a pretty amazing material NRS is using to build their inflatable SUP Boards. Other uses for the technology have been floating docks, high-pressure rescue lifting bags and airplane wings! This material lets NRS build inflatables with flat surfaces that can be inflated to rock-hard rigidity. You get hard-shell performance along with the easy transportation and storage of an inflatable. What makes this possible? Tens of thousands of fine threads. The process starts by joining two pieces of polyester woven support fabric with thousands of fine polyester thread lengths. This base material is made in strips from five to ten feet (1.5m to 3m) in width, and up to 400 needle heads may be used in the setup. Each needle sews a continuous, evenly spaced thread, back and forth between the two pieces of woven fabric, locking them together into an incredibly strong unit. These drop-stitch sewing machines are marvels of complexity. When a change is made in the spacing distance between the two pieces of woven fabric, it can take over 20 days to remove and replace the required needles. The tens of thousands of polyester threads create a super strong inflatable material.

Next, an air-tight coating is applied to the outer surfaces of both sides of the material. The sidewall material is made of polyester base fabric that is coated on both sides. Polyester thread is used throughout because it is strong, durable and has very little stretch. The actual assembly process involves labor-intensive gluing of the sidewall material to the top and bottom pieces of the drop-stitch material. Then a wide seam tape is glued over each lap seam for a bomber, air-tight final product. What you have now is a super strong construction that can be inflated to pressures up to 20 pounds per square inch (psi) or 1.38 bars for metric minded folks. Drop stitch a high tech material that lets NRS build new, innovative inflatables that are stretching boating world boundaries. Innovation, NRS-style.

GOLD Member

Jul-18-23

Kajar India Exports

Supplier From Greater Noida, Uttar Pradesh, India

We are indian manufacturer & exporter of basmati and non basmati rice and offer vide range as follow:
rice variety (1121 | 1718 | 1509 | 1401 | pusa | sugandha | sharbati | pr11/14 | parmal) ir64 parboiled (conventional and pesticides free as per us and eu countries)
rice form (raw | steam | sella | golden sella)
bag size 1kg, 2kg, 5kg, 10kg, 20kg, 30kg, 40kg & 50kg
bag material (pp | non woven | jute | poly pouch | bopp)

we also have vide range of lentils, spices, tea & coffee, cashew. toys & baby products, cotton t shirts, shirts, sportswear, blankets, bedding, curtains, towels, pillow covers, pocket fragrances, air fresheners, leather products (handbags, laptops bags, wallet/purses & designer handbags) jute bags, paper bag, cotton bags, shopping bags, wire & cables, electrical switch and sockets and much more..Including of exports of good, we provide end to end freight forwarding including all documentation and transportation along with custom clearing.

Sep-29-13

Inflatable Sup Board Set

(2.5)

Ask for price

MOQ: MOQ: Not Specified

Gosun Water Products Co., Ltd.

Supplier From Huizhou, Guangdong, China

Gosun Water Products Co., Ltd.

Supplier From Huizhou, Guangdong, China

Inflatable sup board

ble surfboard and export many surfboard to customer in usa, europe and au, our designer and production manager with more than 6 years experience of surf, the worker of glue department with more than 4 years experience.

We use imported rigid drop stitch material (korea) and the first grade pvc tarp for outside cover(the up and down sides were stick 0.6mm pvc tarp, and with 0.9mm pvc for rail reinforcement), so the quality can be guaranteed.

Pack:83*45*45cm master carton

Oct-01-13

Inflatable Sup Board

(2.5)

Ask for price

MOQ: MOQ: Not Specified

Gosun Water Products Co., Ltd.

Supplier From Huizhou, Guangdong, China

Gosun Water Products Co., Ltd.

Supplier From Huizhou, Guangdong, China

Quality details:

We are the manufacture of inflatable surfboard and export many surfboard to customer in usa, europe and au, our designer and production manager with more than 6 years experience of surf, the worker of glue department with more than 4 years experience.

We use imported rigid drop stitch material (korea) and the first grade pvc tarp for outside cover(the up and down sides were stick 0.6mm pvc tarp, and with 0.9mm pvc for rail reinforcement), so the quality can be guaranteed.

2013 fanatic 11'x33'' inflatable sup

Material details:

2013 fanatic 11'x33'' inflatable sup

Actual photos of the mirasol drop stitch material:

2013 fanatic 11'x33'' inflatable sup

Quality details:

2013 fanatic 11'x33'' inflatable sup2013 fanatic 11'x33'' inflatable sup

2013 fanatic 11'x33'' inflatable sup

Accessory

2013 fanatic 11'x33'' inflatable sup

Product show

2013 fanatic 11'x33'' inflatable sup

Good technique, smooth surface, strong reinforcement.

2013 fanatic 11'x33'' inflatable sup

Weight: 20 kg
Pack: 83*45*45cm
Accessary: pump, pressure gauge, paddles, bag, repair kit

GOLD Member

Oct-25-21

Virgin Papers Kraft Papers Color Paper

$0.21

MOQ: MOQ: 25 Metric Tonnes

Sample Available

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

We are the manufacturing Multi-Types of Virgin Papers as per industries requirements for all industries, example Kraft Paper, Colors Paper, Corrugated etc.
Please find our list of Our Products,
Segments Ã¢?? Applications of Product
Cultural Papers
Writing & Printing, Diary / Calendar Printing, SS Maplitho White/Natural Shade, SS Maplitho (High Bright), SS Maplitho (High Bulk), MG/MF Cover/Board, Book Printing, Map Printing, Label Printing, Magazine Printing, Lottery Printing, Security Paper Printing, Computer Stationery Paper, Wedding/Invitation/Greeting Card Mfg. Greeting Paper (MG/MF)
Business Communication Paper.
Photo Copy, Star Copier 2K, Ledger Azure laid, A/c Book / Loose Leaf Mfg., SS A/c Book
Industrial Use Papers.
Decorative / Industrial Laminates - Kraft Paper, Decorative / Industrial Laminates - Padding Paper
Decorative / Industrial Laminates - Barrier Paper, Clay/Color coating, MG/MF Base Paper
Corrugated Box Mfg.-Kraft Paper, Water Proof/Gum Tape Mfg., Cone Mfg., Envelope Mfg., Battery Jacket Mfg., Fire Crackers, Wedding/Greeting Card, Foil Lamination MG Poster, Poly Coated Wrapper/Pouches, Bidi Wrapper Metallization, Soap Wrapper Poster ARSR, Soap Wrapper/Biscuit/Bakery Packing, TDL Poster, Soap Packing, Stiffener Cover, Fire Crackers, Ribbed Kraft (NS/Pink), Water Proofing, Tobacco Packing, Poly Coated Wrapper
Envelope Manufacturing Papers
File Mfg.MG Color Poster/Cover/ Pulp Board
Identity Card, Ice Cream Cup Mfg., TDL Maplitho, Drawing/Sketch Book Mfg., Cartridge Paper
Other Grades, Braille press / Text Book Maplitho Braille, Defense/Ammunition Packing Defense Kraft Paper, Banks Azure laid

800 Nrs Star Phase Inflatable Sup Board Suppliers

Short on time? Let Nrs Star Phase Inflatable Sup Board sellers contact you.

GOLD Member

Oct-25-21

Virgin Printing Papers Kraft Papers Color Paper

$0.25

MOQ: MOQ: 25 Metric Tonnes

Sample Available

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

GOLD Member

Oct-25-21

Virgin Color Papers

$0.25

MOQ: MOQ: 25 Metric Tonnes

Sample Available

Goods Exim International

Supplier From Dubai, India

Supplier Of Paper Products

Goods Exim International

Supplier From Dubai, India

Supplier Of Paper Products

GOLD Member

Oct-25-21

Kraft Papers

$0.25

MOQ: MOQ: 25 Metric Tonnes

Sample Available

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

Goods Exim International

Supplier From Dubai, India

Supplier Of Kraft Paper

GOLD Member

Apr-12-24

Snooker Table Billiard Table Pool Table

(3.8)

$18.00K

MOQ: MOQ: 5 Boxes

Eec-poland Ltd

Supplier From Warszawa, Poland

Supplier Of Pool and Snooker Accessories

Eec-poland Ltd

Supplier From Warszawa, Poland

Supplier Of Pool and Snooker Accessories

Essential details
Place of Origin:
Poland
Brand Name:
STAR
Model Number:
XW101-12S
Sport:
Snooker
Pocket Material:
Leather Pockets
Rail Material:
Steel Block
Cushion Material:
Steel Block
Leg Material:
Solid Wood
Size:
3850*2060*850mm
Net Weight (kg):
1560
Gross Weight (kg):
1480
is_customized:
Yes
Gender:
Unisex
Snooker Tournamnet Table:
Tournament Star Snooker Table XW101-12S
Accessories:
Included
Heating System:
LED lighting
E-Score Board:
Gooden Color
Rubber Material:
UK Northern Rubber
Cloth:
6811 #10
Slate thickness:
2 inches
Color of cloth:
Green Color
Certificate:
ISO 9000
Material:
100% Natural Slate Solid Wood

Payment : TT

Oct-30-13

Inflatable Sup Board

(1.3)

Ask for price

MOQ: MOQ: Not Specified

Leisurefun Sports

Supplier From Dongguan, Guangdong, China

Supplier Of Boats & Vessels

Leisurefun Sports

Supplier From Dongguan, Guangdong, China

Supplier Of Boats & Vessels

Pressure 16-20 psi,
Size: 10'6"x30"-4"
Color: customerized
Accessories: eva, fin, d-ring, high pressure hand pump, backpack bag, adjustable paddle

Pack size: 95x5x25cm, weight around 20kg

GOLD Member

Oct-25-20

150 Mm V6 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

GOLD Member

Oct-25-20

V6 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

GOLD Member

Oct-25-20

125 Mm V5 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

GOLD Member

Oct-25-20

V5 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW Ã¢?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 mÂ²/sec (max.)
- Ph Value : 6.5 to 8.5

GOLD Member

Oct-25-20

200 Mm V8 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available

Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

GOLD Member

Oct-25-20

175 Mm V7 Borewell Submersible Pumpset

Ask for price

MOQ: MOQ: Not Specified

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

Falcon Pumps Pvt. Ltd.

Supplier From Rajkot, Gujarat, India

Supplier Of Industrial Pumps

V7 Borewell Submersible Pumpset

Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps

Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

Jun-16-22

Inflatable Sup Paddle Board

$110

MOQ: MOQ: Not Specified

Jiangsu Hangyang Outdoor Products Co., Ltd.

Supplier From Suqian, jiangsu, China

Supplier Of Sports Goods & Equipments

Jiangsu Hangyang Outdoor Products Co., Ltd.

Supplier From Suqian, jiangsu, China

Supplier Of Sports Goods & Equipments

Number of dropstitches/m 24,800 pcs.
Thread type: 500D, Weight per unit area: 2.550 g/m
Material thickness PVC incl. Stitch: 1,2 mm
Material thickness PVC Rail: 1,2 mm
Wall thickness paddle: 1,2 mm

Jun-14-22

Inflatable Sup Paddle Board

$110

MOQ: MOQ: Not Specified

Jiangsu Hangyang Outdoor Products Co., Ltd.

Supplier From Suqian, jiangsu, China

Supplier Of Sports Goods & Equipments

Jiangsu Hangyang Outdoor Products Co., Ltd.

Supplier From Suqian, jiangsu, China

Supplier Of Sports Goods & Equipments

Number of dropstitches/mÂ²: 24,800 pcs.
Thread type: 500D, Weight per unit area: 2.550 g/mÂ²
Material thickness PVC incl. Stitch: 1,2 mm
Material thickness PVC Rail: 1,2 mm
Wall thickness paddle: 1,2 mm

Sep-03-21

Inflatable Sup Board

$100

MOQ: MOQ: Not Specified

Weihai Alix Outdoors Product Co.,Ltd.

Supplier From Weihai, Shandong, China

Supplier Of Skateboards

Weihai Alix Outdoors Product Co.,Ltd.

Supplier From Weihai, Shandong, China

Supplier Of Skateboards

Product name:
Inflatable Paddle Board

Logo:
Customer's Logo

Accessories:
pump,paddle,fins,repair kit,bag,leash

Weight:
7.82KG

Size:
305*76*15cm

Delivery time:
7days

Certification:
CE Certification

Material:
Stitch + PVC+EVA

Warranty:
1 Year

Apr-23-21

10'6 Inflatable Sup Board