Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L)
Specialty
1. Economical type for most of area, common people can afford it
2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid
3. Mature technology and stable operation
4. Higher efficiency on photo thermal conversion.
5. Accessory is popular and easy maintenance
Solar water heater Specifications:
1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm
2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm
3) Inner tank of solare water heater: SUS304 food grade stainless steel.
4) solar water heater Outer tank: Stainless steel, 0.4mm
5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L
6) Thickness of solar water heater bracket: 1.5mm
7) Glass vacuum tube of solar water heater: 58mm X 1800mm
Remark:
1. Solar heat storage tank diameter(mm): 460mm/480mm
2. Thickness, insulated(mm): 50mm
3. Vent connection(inch): 1/2''or /3/4''
4. Electric heater: 47mm 1500W, 3/4''
5. Water connection(inch): 1/2'' or 3/4''
6. Collector angle(degree): 25-45
Ke58s
Vacuum tube: 58x1800mm
Inner tank: stainless steel 304 2b food grade
Outer tank: aluminum galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
Tubes with capacity 135l up to 325l
Material and major element of solar water heater:
1. Inner water tank: sus304-2b stainless steel /0.5mm thick
2. Outer water tank: white plate /0.4mm thick
3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick
4.Solar vacuum tube:
A) size: 47 x 1, 500mm / 58 x 1, 800mm
B) qty: 15 /18 / 20 / 24 / 30 pcs
5.Temperature insulation layer;
5.5cm imported polyurethane, keep same temperature and high pressure foam
6.Tank diameter:460 mm
Heating system:
Thermosyphon (passive)
Connection type:
Direct-plug
Installation:
Roof mounted
Housing material:
Coated steel
Certification:
Ce
Capacity:
165
Place of origin:
Zhejiang china (mainland)
Brand name:
Jinyi & oem
Model number:
Jng5818-15
Out tank material:
Coated steel
Out tank diameter:
470mm
Out tank thickness:
0.4mm
Inner tank material:
Sus304-2b
Inner tank diameter:
360mm
Inner tank thickness:
0.4mm
Tank insulation pu foam:
High density
Tank insulation thickness:
55mm
Vacuum tubes length:
1800mm
Support bracket material:
Galvanized steel
Packaging detail:1. Cartons: 4ctns 2. Pallet: (charge by extra)
1. The outer tank: Color Coated Steel, thickness 0.4mm.
2. The inner tank: SUS304/2B, thickness0.5mm.
3. The warm keeping layer: polyurethane foaming 55mm.
4. The bracket, Galvanized Steel, thickness 1.5mm
5. Vacuum tube: 47-1500 or 58-1800, Two layer.
6. Angel of bracket: as your need.
Model: UNP-S02 Series
Type: No pressure
Solar Vacuum Tube: 8/10/12/15/18/20/24/30/36
Tube Size: 58*1800 1.95kgs
Tank Capacity: from 80L to 300L
Material: Stainless steel
Bracket: U type and 1.2mm thickness
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer:polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800.
6. Tank capacity:70-400l.
7. Assistant tank heating element, mg rod, reflector and controller can be provided.
Characteristic:
1. Operated completely automatic if connect with intelligent controller.
2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system.
Technical specificationa
*Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable.
*Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm.
*Silicon rings to connect and seal them.
*The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time.
*Whole glass vacuum tubes adopt super hard borax and silica glass.
*Absorb rate:=93%, thermal radiation rate:=6%(100 íµ)
*Resist 25mm hail, using life can last 15 years.
*Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube.
*If you use electrical appliances to aid heating, to switch off the power supple before boiling.
*To test the water temperature before using, in order to avoid scalding.
OEM factory since 1998
CE,ISO,CCC,SGS
Samples welcome
5 years warranty and free training
Features:1.Cheap and reliable solution, Simple structure, Easy installation.
High-efficiency.
Scientific and reasonable design.
Withstand water pressure no more than 0.1MPa
Operated without any power supplying
Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy.
Hot water can be used directly and higher heating efficiency
Detail Specifications:
Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm;
Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm; Density:36~39KG/m3;
Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%.
Freeze protection:-25íµ
Hair resistance: 25-35mm
Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage
All install documents are free
OEM factory since 1998
CE,ISO,CCC,SGS
Samples welcome
5 years warranty and free training
Features:1.Cheap and reliable solution, Simple structure, Easy installation.
High-efficiency.
Scientific and reasonable design.
Withstand water pressure no more than 0.1MPa
Operated without any power supplying
Electric heater 1.5KW for heating when there is no enough sunshine,such as raining,snowy.
Hot water can be used directly and higher heating efficiency
Detail Specifications:
Inner tank: Food grade SUS304-2B stainless steel by argon protect welding& thickness: 0.5mm;2) Outer tank:Color steel coated anti-corrosion layer &thickness:0.5mm;
Insulation layer: Imported polyurethane foamed with overall high pressure equipment & thickness : 55mm;Density:36~39KG/m3;
Vacuum tube: AlN-Al high selective coating tube& Absorption:í¦93%; Emittance:í_ 5%.
Freeze protection:-25íµ
Hair resistance: 25-35mm
Bracket: hot galvanized steel painted with anti-corrosion layer &thickness:1.5mm;suitable on inclined or flat roof; Wind stress: 183.5km/h without damage
All install documents are free
KM24-150-S consists of 24 vacuum tubesand its water tank's capacity is 150 Liter. The inner of tanks isstainless steel, while the outer of them is galvanized. It has 50 mm polyurethaninsulation and high quality.This type of solar system includes a water tank, an expansion tank, 24 pcs vacuum tubes and standparts.
24381 Non Pressurized Solar Water Heater Suppliers
Short on time? Let Non Pressurized Solar Water Heater sellers contact you.
