Find Verified Non Asbestos Gasket Suppliers, Manufacturers and Wholesalers

Non-asbestos Gasket Good Alternative To Compressed Asbestos Gasket
Non-Asbestos Gasket is a general-purpose sheet material reinforced with high-grade asbestos-free fibers and bonded with heat-resistant nitrile rubber.

It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket.

The gasket is suitable for engineering, automobile, chemical, oil & gas, petrochemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off.

COMMON SPECIFICATIONS

Thickness (mm) 0.46.0
Available size (m) 1.5 1.6, 1.5 2, 1.5 3, 1.5 4, 1.5 6
Maximum continuous working temperature 650 °F
Steam max continuous working temperature -100 °F
Maximum pressure 85 bar
Tensile strength (MPa) 13
Residual stress (MPa) > 22
Compressibility 6%
Cold compressibility 8%
Cold recovery 3%
Hot creep 22%
Hot recovery 2%
Density (g/cm3) 1.62.0
Gas permeability (mL/min)

We offer Non Asbestos Gaskets which are gaining significance due to the known hazards of asbestos made products. We offer a wide range of proven Compressed Non Asbestos Gaskets with high fluid media in addition to a few special applications. Our Non Asbestos Gaskets have high strength and durability. These Compressed Non Asbestos Gaskets remain in use even when exposed to very high temperature.
Features :
Thickness : 0.25 mm to 6mm
High strength
Excellent durability
Can withstand up to 450oC temperature
Incomparable chemical and steam resistance

The product is mainly made of aramid fibers and artificial rock wool as the reinforcing materials, and is specially manufactured by the roller pressing method using natural rubber, styrene-butadiene rubber or nitrile rubber as the adhesive. It has excellent temperature resistance, pressure resistance, oil resistance, airtightness, and compression rebound performance. According to customer requirements, it can be equipped with metal wires. It is generally applied to industrial equipment such as pipe flanges, valves, heat exchangers, pressure vessels, mechanical equipment, and engines.
Application media: Various gases, water, steam, chemical solvents, and various oils, etc.

G1520 is an outstanding asbestos-free gasket with excellent performance. It is made by pressing with the roller pressing method using aramid fibers, high-temperature resistant synthetic mineral fibers, and oil-resistant rubber. It features high temperature resistance, pressure resistance, oil resistance, excellent airtightness, and compressive resilience. After testing, it is completely replaceable with imported materials as an asbestos-free material. According to customer requirements, it can also be equipped with metal wires. It is a 100% asbestos-free high-quality and environmentally friendly material. It has been exported to many countries and regions such as Europe and America in large quantities. It is widely used in industrial equipment such as pipe flanges, valves, heat exchangers, pressure vessels, mechanical equipment, engines, etc.
Application media: Various gases, water, steam, chemical solvents, and various oils.

Non-asbestos Gasketing Sheet is applied to the automobile,agricultural machinery,motorcycle,engineering machinery etc..the medium is the lubricating oil,the spacer material under150centigrade of suitable temperature.
Whatsapp:86-13566083951
Standard Size:1000mmx1000mm,1000x1200mm,1000x500mm
Thickness:0.5~2.0mm
Color:Black,Grey,Green

Compressed non-asbestos fibre(CNAF) gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF).

Compressed non-asbestos fibre(CNAF) sheet, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.5Mtr(Width) x 1.5Mtr(Length)






1.5Mtr(Length) x 1.5Mtr(Width) x 50cm(Height)

Gross weight @ 200kgs

We can provide all kinds asbestos gasket sheet and non asbestos gasket sheet with good price.
Thickness: 0.3 to 6mm
4500 x 1500mm, 4100 x 1500 mm, 3850 x 1300 mm, 3810 x 2700 mm
1500 x 2000 mm, 1500 x 1500 mm , 1500 x 1350 mm, 1500 x 1000 mm,
1270 x 1270 mm,
The other size is optional or according to the requirements of customers.
Packing: in roll or in wooden pallet of about 1000 kgs, 2000kgs net each.

Non asbestos sheet
Length:1000mm;1350mm;2000mm;4000mm
Width: 1500mm
Density:1.8 to 2.0g/cm3
Working pressure:100 bar
Working Temperature:370 D.C.(Color:Blue)
Working Temperature:400 D.C.(Color:Black)
Compressibility(astm f36): 7 to 17%
Recovery(DASTM 13 16Hrs-300 D.C. - 50N/mm): 20 N/mm
Gas infiltration(DIN 3535/4):0.5ml/min
Immersion test (ASTM F146)
Immersion in ASTM oil#3 under
5Hrs/150D.C.
Thickness increase: 10%
Tehsile strength:8N/mm
Sulfuric-Acid under 48 Hrs/23D.C.
Loss on ignition(DIN52911):26%
Density(DIN3754): 1.85g/cm3
PH value:2 to 14

Non-asbestos joint sheet
At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework.

1volume/polybag

Our range of Compressed Asbestos Gaskets is widely demanded in the market because of its outsatnding quality. Compressed Asbestos Fibre (CAF) Gaskets are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders and fillers and vulcanized into sheets of homogenous compositions and uniform thickness. To avoid the necessity of producing perfect finish on the contact faces of a mechanical assembly, which is not only costly but quite often impracticable, a gasket of compressed asbestos fibre jointing enables a tight seal to be created and maintained between separable members. The seal is effected by the yielding, or the flow of the jointing material into the imperfections of the joint contact faces. In this way the gasket provides an unbroken barrier of homogenous structure through which no pathways exist for escape of the confined media.
Features :
Thickness : 0.25 mm to 6 mm

ASBESTOS GASKET IDEAL INSULATING AND CORROSION RESISTANT MATERIAL
Asbestos Gasket is inexpensive, readily available and stable. It is fireproof and can withstand extreme heat making it the ideal thermal isolation material. As well, asbestos gaskets are non-corrosive, impervious to chemical reactions and non-conductive of electricity.

It is widely used in exhaust systems, turbo chargers and cylinder.

TYPES

White fibrous chrysotile asbestos on a black background
Chrysotile asbestos

Grey acicular fiber amphibole asbestos on a black background
Amphibole asbestos

COMMON SPECIFICATIONS

Thickness (mm) 0.46.0
Plate sizes (mm) 1000 1500, 1270 1270, 1270 1300, 1270 3810, 1300 1300, 1350 1350, 1350 1500, 1360 1500, 1500 1500, 1500 2000, 1500 3000, 1500 4000, 1500 4100, 1500 4500, 2000 3000
Maximum continuous working temperature 200 °C
Steam max continuous working temperature 120 °C
Maximum operating pressure 70 bar
Maximum pressure (MPa) 1.5
Tensile strength (MPa) 6
Compressibility 12 ± 5 %
Density (g/cm3) 1.62.0
Color red, green, blue, yellow, black, gray and more
ple in.

Specifications - "PRODUCT: SPIRAL WOUND GASKET / NON METALLIC GASKET
SIZE & RANGE: 1 /2 INCH TO 120 INCH / UPTO 200 INCH
STANDARD: API 601/ASME B 16.20/DIN/IS / ASMEB16.21/DIN/IS/AWWA/BS4504"

Product Origin - India, China

Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)

EPDM Rubber Gasket for Aluminum System
All kinds of shape, form
All Black color

Crown Rubber & Plastic Products manufactures high-quality head gaskets in various sizes, dimensions, and materials, designed to provide reliable sealing against liquids and gases. Engineered to withstand high temperatures and demanding operating conditions, our gaskets ensure optimal engine performance and durability.

If you're seeking a dependable gasket supplier, Crown Rubber & Plastic Products is your trusted partner.

Our manifold gaskets are precision-engineered to provide reliable sealing between the engine and intake or exhaust manifolds.

Designed to withstand high temperatures and pressures, they prevent gas and fluid leaks, reduce emissions, and maintain optimal engine performance.

These gaskets help ensure smooth vehicle operation and maximum efficiency, making them ideal for both automotive and industrial applications.

EPDM Rubber Gaskets packing Picture And EPDM Cord tube

Our Precision Molded Flange Gaskets are engineered for accurate fit and superior sealing in high-performance piping systems.

Made from high-quality elastomers, they offer excellent resistance to pressure, temperature, and chemical exposure, ensuring leak-free operation in critical industrial applications.