We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
1727 Niton Portable Xrf Alloy Element Analyzer Suppliers
Short on time? Let Niton Portable Xrf Alloy Element Analyzer sellers contact you.
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch
Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.
Product name
ALLOY 20 STAINLESS STEEL
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Weight : < 3 lbs 10.7 oz (1.66 kg)
Dimensions : 10.25 x 11 x 4 in. (256 x 275 x 100 mm)
Tube : Ag anode 45 kV maximum, 80 �¼A maximum
Detector : High-performance semiconductor
System Electronics : 400 MHz ARM 11 CPU, 300 MHz dedicated DSP, 80 MHz ASICS DSP for signal processing, 4096 channel MCA ,64 MB internal system memory/ 128MB internal user storage.
Display : Fixed angle, color, touch-screen display
Standard : Analytical Range 22 elements including all precious metals
Data Storage : Internal >10,000 readings with spectra
Data Transfer : USB, Bluetoothâ?¢, and RS-232 serial communication
Security : Password-protected user security
Mode : Precious Metals
Data Entry : Touch-screen keyboard, User-programmable pick lists, Optional wireless remote barcode reader
Standard Accessories and Features :
Locking shielded carrying case
Shielded belt holster
One 6-cell lithium-ion battery pack
110/220 VAC battery charger/ AC adaptor
PC connection cables (USB and RS-232)
Niton Data Transfer (NDTâ?¢) PC software
Safety lanyard
Mobile test stand
Optional Features and Accessories :
Thermo Scientific portable test stand
Additional battery pack
Wireless portable printer
Barcode scanner
Licensing/Registration : Varies by region. Contact your local distributor
Compliance : CE, RoHS
The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)
Used Rails shall be considered free of alloys when the residual alloying elements do not exceed
Cut to 1.5 meter length (standard)
1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%.
Cu%: 99.9%
Element...0.005... (%)
Copper..99.9... % (Min.)
Lead...0.005.... % (Max.)
Bismuth...0.5.. % (Max.)
Total impurities...0.3.. % (Max.)
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch
Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
The handheld niton xl3t goldd+ xrf analyzer stands alone with its many standard features and available options.
Enhanced goldd technology offers superior performance for light element (mg-s) analysis with the lowest limits of detection
Pinpoint areas of interest on a sample using the integrated color ccd camera and the optional integrated 3 mm small-spot collimation
True lab-quality performance in a handheld instrument
We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.
High purity copper ingot is a very special metal for us, as our activities encompass all aspects of the copper business, ranging from mining through smelting to fabricating. Hereunder, we will examine our achievements in the purification of copper as an example of our purification research. The tables below show analytical results of impurities in the worldâ??s purest copper (6N: 99.9999%Cu). This analysis was conducted by Glow-Discharge Mass Spectrometry (GDMS), which allows microanalysis of all elements. The result indicates the ultra-purity of the copper, proving that the quantities of all elements other than copper are below the detection limit. It is well known that ultra-high-purity metals possess very unique natures sharply different from those of ordinary metals.
High purity copper ingot as adding elements can be directly applied in aviation, space atomic industrial super alloy, and the development of new alloy, as well as the analysis of the standard sample. It can also be through mechanical processing preparation into high purity copper foil shielding materials for atomic reactor.
Stainless steel is an iron alloy with a chromium content of at least 10.5%. Chromium forms a thin oxide layer on the surface of steel, known as the passivation layer.
This can prevent further surface corrosion. Increasing the chromium content can improve corrosion resistance.
Stainless steel also contains varying amounts of carbon, silicon, and manganese.
Other elements such as nickel and molybdenum can be added to impart other useful properties, such as enhanced forming ability and increased corrosion resistance.
Waste stainless steel refers to stainless steel waste generated from industrial manufacturing and stainless steel processes, as well as stainless steel equipment that has been damaged or scrapped due to long-term use, and stainless steel utensils used in daily life. Our factory produces approximately 20 tons of stainless steel per day, and we have abundant inventory of stainless steel waste with guaranteed quality. Scrap stainless steel is a high-grade alloy steel with a higher value than ordinary scrap steel.
FPI MiX5 Portable XRF spectrometer
1.Overview
FPI MiX5 handheld X-ray fluorescence (XRF) analyzers( FPI MiX5 Portable XRF spectrometer ) enables fast, accurate and non-destructive analysis of a variety of materials with the world's leading X-ray fluorescence analysis techniques. It can determine the metal grades in seconds, with excellent metal analytical ability. Analysis results of laboratory level can be achieved with extra testing time.
MiX5 series can analyze element composition of ferrous, nonferrous metals and alloy Enable customers to get accurate analysis results in quality control, material sorting, alloy identification, security, accident investigation etc.
Manufacture FPI MiX5 Portable XRF spectrometer
2.Features
(1). Optimised calibrations making reliable testing
FPI MiX5 series combine a robust fundamental parameters (FP) method and empirical calibrations for superior precision and accuracy. Simply select the application that you need and analysis can be finished in seconds.
D G EXIM is well positioned in the water treatment business and technically geared to tailor-make solutions to any water treatment requirements. Every situation is analyzed based on the elements present and a unique solution is offered. We supply chemicals for Boiler Treatment, Cooling Tower and Portable Water Treatment as well AS Effluent Treatment. Below you will find some of the water treatment chemicals we supply
Thermo Scientific Niton XL3t GOLDD XRF analyzer delivers the ultimate performance in a feature-rich package. The direct benefits to you: real-time results.
It is the instrument of choice when you require extreme accuracy, precision, and ease of use, with its faster analysis, higher precision, and the ability to measure light elements. Its enhanced GOLDD technology offers superior performance for light element (Mg-S) analysis with the lowest limits of detection and fastest measurement times.
The handheld Niton XL3t GOLDD XRF analyzer stands alone with its many standard features and available options.
Enhanced GOLDD technology offers superior performance for light element (Mg-S) analysis with the lowest limits of detection
Pinpoint areas of interest on a sample using the integrated color CCD camera and the optional integrated 3 mm small-spot collimation
True lab-quality performance in a handheld instrument
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittl
Copper concentrate is a refined product obtained from copper ores, boasting a higher purity level compared to its raw counterparts. It typically contains 25-30% copper, achieved through meticulous removal of impurities and unwanted elements �¹.
The production process involves several steps:
- Exploration: Identifying potential copper deposits through mapping, sampling, and surveys.
- Mining: Extracting copper ore through open-pit or underground mining methods.
- Crushing and Grinding: Breaking down the ore into smaller pieces to increase surface area.
- Froth Flotation: Separating copper minerals from waste rock using chemicals and air bubbles.
- Concentrate Thickening and Filtration: Refining the concentrate to remove excess water and impurities.
- Smelting: Heating the concentrate to eliminate unwanted elements and produce copper matte.
- Electro-Refining: Dissolving copper matte in an electrolyte solution and passing an electric current to produce pure copper cathodes.
Copper concentrate has various applications:
- Plumbing: Copper\'s non-toxic, non-permeable, and corrosion-resistant properties make it ideal for plumbing.
- Electrical and Communications Wiring: Copper\'s exceptional conductivity and ductility make it perfect for electrical wiring.
- Bronze Production: Copper is alloyed with tin to produce bronze, used in bearings, statues, and other applications.
- Heat Conduction: Copper\'s high heat conductivity makes it suitable for heat exchangers.
- Construction and Architecture: Copper is used in roofing, gutters, and decorative fixtures due to its corrosion resistance and adaptability.
- Transportation: Copper is used in vehicles, planes, trains, and ships due to its versatility and reliability.
EXF9900 is a kind of X-ray fluorescence spectrum precious metal tester, which is based on years of precious metal detection technology and experience, and is independently developed and produced by CFAN Instrument company. It is equipped with imported top SDD detector, all element detection, computer-integrated and aeronautical design, High-end appearance, which owns more than 10 research and development patents, outstanding performance, cost-effective! Our standard is in line with the new national standard GB18043-2013, can be accurate detection of gold and silver jewelry.
Product advantage
High cost performance
Can fast accurate detection of various precious metal, widely applied!
Nondestructive testing
Will not cause any damage when measuring jewelry of any shape.
Simple and intelligent operation
Unique one-button test function, automatic detection, no professional operation required
Fast for Testing
3 seconds qualitative, 7 seconds can get intuitive results.
Easy to carry
Integrated design, small space, easy to carry and management.
Safe and durable
Have anti-radiation function, the life of the machine is more than 10 years
High precision
PPM level accuracy, reliable testing data, plus or minus 0.01% of the detection precision
Operational safety
Equipped with radiation protection devices, and active protection operation safety.
Technical parameters
Equipment principles: X fluorescence energy dispersion
Accuracy: ±0.01%
Machine resolution:125�±5eV
Detector: top SDD probe
temperature: - 3 ~ 23 â??
Display Screen: Inbulit Multi-point hand touch Screen
