Find Verified Nano Acrylic Primer Suppliers, Manufacturers and Wholesalers

Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.

RECOMMENDED APPLICATION

Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.

PRODUCT TECHNICAL DATA

No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

Tweed Grey Primer -super Strength For Cement

Synthetic Red Oxide Primer
Ritver Synthetic Red Oxide Primer Commercial is based on Alkyd resin containing anticorrosive pigments. It is used as a primer coat for many applications especially for protecting the metals and other steel structures against corrosion and is quite versatile. It forms a firm base with good adhesion for Ritver Topcoat Enamels and Ritver Quick Drying Enamels.

ARP326
PLASTIC PRIMER
A transparent single component primer that promotes adhesion of subsequent coats of paint on most plastic substrates particularly those used in automotive.

WALL BIND ACRYLIC Cement Primer Water Thinnable

No. Type WALL BIND Acrylic Interior Wall Primer (Water Thinnable) is suitable for useas a primer for painting of waterbased wall finishes such as distemper and plastic emulsions.
1 FEATURES WALL BIND has a special features are better whitness and opacity, easy brushing, excellent covering,alkali resistance,quick drying and good filling properties. Provides superior hiding and superior whiteness.
2 RECOMMENDED APPLICATION WALL BIND can be used for priming plastered wall,asbestose,brick work,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 130-140 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.

We can supply 100% Acrylic Raw White yarn in Count Nm 20 to Nm 40 both single and TFO.

100% ACRYLIC HIGH BULK RAW WHITE / GREIGE YARN FOR KNITTING ON HANKS. COUNT RANGE NM 20 TO NM 50. WE CAN SUPPLY BOTH SINGLE & TFO AND UNDYED / DYED BOTH.

100% ACRYLIC DYED HIGH BULK YARN ON CONES. We can supply 100% ACRYLIC HIGH BULK DYED YARNS ON CONES IN DIFFERENT COUNT.

Epoxy Primer -guard Primer Is 2 Component Paint System For Interior Walls

A vinyl acrylic primer designed for priming masonry surfaces

PROPERTIES
Colour : Full range- as per shade card

Finish : Smooth / Matt

Solids(volume): 24 �±2%

Specific gravity: 1.40 �± 0.05

Theoretical Coverage 7-8 m2/ltr @ 40 DFT

DRYING TIME :AT 25
Touch dry: 2 hours

To Recoat: 4 hours

Texture Primer-special Primer For Texture Coatings And All Weather Exterior Paints

Plastic Primer For Car Bumpers

Textile Epoxy Primer

ISOLATOR B is an isolating primer based on saturated polyester resin and poly- functional isocyanate polymers.

Nano Nano Candy
Available Flavour variants Orange Peel, Starfruit, Pineapple Salad, Tamarind, Soursop, Guava, Grape, Dalgona 10x30x12,5gr, Orange Peel 60x20x50gr, Orange Peel Jar 7x30, Assorted Jar 7x25, Orange Peel Jar 14x30, Salsa Lime, Salsa Mango, Salsa Orange, Salsa Strawberry, Salsa Mint sachet packaging 10x10x15gr, Salsa Gift Pack 12x130gr, Nought Original, Strawberry, Chocolate, Coffee Tiramisu 6x20, Milky Chocolate Sachet, Milky Vanilla Sachet, Milky Strawberry Sachet, Milky Cookies Cream Sachet, Milky Taro Sachet 6x30, Chew Orange Pell, Chewy Blueberry Lime, Chewy Mango, Chewy Soursop 6x20, Orange Peel Pouch 8 item, Tamarind Pouch 8 item 12x10, Grape Joy C Pouch 15 Item, Orange Joy C 15 item contain 60 pack. Product is Manufactured by PT Konimex Pharmaceutical Laboratories.

Odorless, acrylic-based primer, antibacterial, antifungal, penetrates deep into the surface, strengthens the outer layer. Reduces paint consumption, as the ability of the surface to absorb paint decreases. Used for painting and puttying.
Per canister 10L

Brighto Acrylic Primer (Exterior/Interior)

Price :
0.90 Ltr - USD 2.6
3.60 Ltr -USD 4.6
18 Ltr- USD 19.2

Product Category- Paint & Primers

Product Name- Scottseal

Description of the product- Acrylic Primer

Area of Use (Application)- Interior and exterior walls

Category (For Painters, Carpenters, etc.)- Painters

USP of the product-

1. High covering ability
2. Reduces the porosity of the surface
3. Good binding property to the surface

Area of application- Interior & Exterior

Can supply:

PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade.
Post industrial. Materials are bulk.
Can load bulk in 1x40' Open Top container approx. 20-24 MT.

Ready for shipment. Photos are available upon request.

If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.

Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.