This Perkins GP84472U Complete Diesel Engine is brand new and has never been used. It has a horsepower of 60hp at 2800 rpm and is a 404D-22 model. The engine type is diesel and it is a complete engine, perfect for those in need of a replacement or upgrade. This engine is great for heavy equipment and is sure to meet your needs.
Stock No - 2501221144BTBEG
Reg Year/Month - 0000
Mileage -
Engine Size -
Transmission - MT
Drive Type -
Steering - Right Hand
Engine Model - VQ35HR
Model Code - Chassis No
Fuel - Diesel
Color -
Seats -
Maximum Carry -
Status - In-Stock
Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil. The 10 PPMâ?? refers to the maximum sulphur content of the fuel, which is 10 parts per million (ppm) or less.
Low-sulphur diesel fuels such as EN590 10 PPM are required in many parts of the world to meet emissions regulations and reduce air pollution. The lower sulphur content in the fuel allows diesel engines to operate more efficiently and with less emissions of harmful pollutants such as particulate matter and nitrogen oxides.
EN590 10 PPM diesel fuel is commonly used in modern diesel engines, including those in passenger cars, trucks, buses, and heavy equipment. It is typically available at fuel stations that offer diesel fuel, and is used in many countries throughout Europe and around the world.
Contact us for Specification Sheet.
297545 Motor And Diesel Engine Oil Suppliers
Short on time? Let Motor And Diesel Engine Oil sellers contact you.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor
30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Product Description - Is one of a number of different grades of diesel oil
Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.
Product origin - Middle East and USA
Key Specifications/Special Features - D2 Diesel Gas Oil is used in most types of diesel powered engines
Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month.
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply:
Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels.
Key characteristics of Diesel D6 may include:
High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery.
Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards.
Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates.
Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed.
For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries.
Product Details:
Storage : Dry Place
Form : Liquid
Grade : Industrial Grade
Application : Industrial
Supply Ability : 2500000 Kilograms Per Month
Price And Quantity
Minimum Order Quantity : 50 Kilograms
Product Specifications
Grade Industrial Grade : Application
Industrial : Form Liquid
Storage : Dry Place
Trade Information
Payment Terms : Cash in Advance (CID)
Supply Ability : 2500000 Kilograms Per Month
Delivery Time : 1 Week
Main Domestic : Market All India
Product Description
We are offering D2 Diesel Oil that is distilled from crude oil. It can be used without reformers and additives. The first invented engines used this fuel before the petrol cars were invented. Nowadays this is used for diesel engine vehicles mostly in trucks, buses, boats, construction engines, agricultural vehicles and so on. Some small cars, boats and small trucks also have diesel engines that use this fuel. D2 Diesel Oil is an industrial grade liquid that is to be stored at a dry place to store for longer period of time.
We supply 100% used engine oil /Used Engine Oil/Waste Engine Oil/UEO from vehicles, which are of higher quality and quantities at very good competitive prices, and we have the ability to supply up to 2500 MT per month, as we try to keep the quality at the highest in its grade.
Water : +/- 2%
Gross calorific Value : Min 10 000 Kcal
Sulfur content : Max 0.
Packaging & Delivery
Packaging Details: DRUMS or as per buyer's request
Delivery Detail: prompt delivery once order is confirmed
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS
Malaysia Rapeseed Oil (not Russia)
CIF U$980-1060ï¼?could provide maximum 21-24 MT/month. Provider is US big company.
This is NOT 100% confirmed so far (too welcome). Need your realistic LOI within 12 hours, otherwise it's invalid.
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB
1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
297545 Motor And Diesel Engine Oil Suppliers
Short on time? Let Motor And Diesel Engine Oil sellers contact you.
