Find Verified Modified Cyclo Aliphatic Polyamines Hardner Suppliers, Manufacturers and Wholesalers

Low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, moderate pot life, good colour stability and high gloss films are required.

It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, moderate pot life, good colour stability and high gloss films are required.

A low viscosity, modified aliphatic polyamines epoxy curing agent. It has been designed for use in solventless coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.

A low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.

Aliphatic & Cyclic Amines

Product : n-Propylamine

CAS No. : [107-10-8]


Applications : Endritic polymer-modified silica (DPS)

Modified Polyamines

KINGCURE B-311 is a low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent.
It has been designed for use in solvent-less coatings and leveling floorings where excellent flow,
good adhesion and high gloss films are required.

Viscosity (mPa s , 25C) 300 ~ 700.

Ucpsa98 is a light yellow aromatically modified c5 aliphatic hydrocarbon resin with a unique combination of light color designed for pressure sensitive adhesive with the following characters:

1. Good character for rolling ball test.
2. Low melt viscosity and excellent heat stability.
3. Excellent balance of tack, peel and cohesive strength.
4. Broad compatibility with numerous sis, sbs, sebs etc. And other tackifying resins.

Technical specifications:
1. Appearance: yellowish granule
2. Color (gardner in 50% toluene): 5.0 max
3. Softening point (centigrade, ball): 96-99
4. Ash content (wt. %): 0.05 max
5. Acid value (mg koh/g): 0.10 max
6. Cloud point (1:1:1 resin/eva/wax, centigrade): 95 max
7. Melt viscosity (200 deg c, cps): 160 max
8. Flash point (deg c): 260 min
9. Heat resistance (200 centigrade 3h gardner): 7
10. Specific gravity (20/20 centigrade): 0.97




1. Packed in craft paper bags laminated with pe bags, 25kgs net weight.
2. Packed in 25kgs pp woven bag laminated with pe bags.
We also supply the packing according client request.

Non-reactive Polyamide Resin (Adhesive Agent for Printing Ink, Hot-melting Adhesive Agent)

Hardener for Epoxy:
Reactive Polyamide Resin
Denaturalized Polyamine
Denaturalized Polyamine Additive
Solvent-diluted Polyamide Resin

Non-reactive Polyamide Resin:
Adhesive Agent for Printing Ink
Hot-melting Adhesive Agent

A solid type fatty polyamide resin synthesized by a polycondensation of mainly the dimerized fatty acid and the alkylenepolyamines.
The major applications is in the rotogravure printing inks .

(a). Good solubility into various conventional industrial solvents.
(b). Superior adhesion onto many kind of substrates.
(c). Good wetting( dispersion,)of the pigments and dyestuffs.
(d). Good resistance to water, oil and chemicals..
(e). Fast release of the solvent from the printed film..
(f). Smooth and hard film surface with high gloss.
(g). Smooth and hard film surface with high gloss, which is suitable for over-printings.

A high molecular weight polyamide resin especially designed for hot melt adhesive use.

It is easy to soluble in mixed organic solvent such as aliphatic or aromatic hydrocarbons and alcohols type solvent. This resin has the characteristics of good mechanical strength heat resistance, flexibility and long open times(good workability) .

Polyaminoamide type epoxy curing agent.

Mixtured resin of hardner with an epoxy resin maintain a rather longer pot-life, and provides its cured products with well balanced cured properties.

hardner is a therefore recommended to be employed for such applications as general adhesives and structural adhesives in construction works.

A curing agent is a standard reactive polyamide intended for use in curing of epoxy resin .It is cut to 60 % solids by weight in xylene.

When cured with high molecule weight of epoxy resin .it is provides cured films with such
high orders desired at actual application field as good flexibility, simultaneously with good water resistance and good alkali resistance.

Thus desired for heavy duty primer coatings application of anti corrosion resistance.

Flooring-
a low viscosity, modified -aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.

A modified cycloaliphatic amine intended for use as a room temperature curing agent for liquid epoxy resins special features of this curing agent include its low viscosity, light colour, good colour stability and high gloss.

A high viscosity, reactive polyamide resin designed for use with liquid epoxy resins to achieve cure at room temperature.

It is suitable for use in adhesives, civil engineerings, high solids anti-corrosive coatings for marine and maintenance coatings where excellent adhesion, good flexibility and toughness, good water and corrosion resistance are required.

Modified cycloaliphatic amine intended for use as a room temperature curing agent for liquid epoxy resins special features of this curing agent include its low viscosity, light colour, good colour stability and high gloss.