Mgs is motor capacitor self-healing flast style capacitor, which is wound with polypropylene film dielectric, flameretardant plastic case and epoxy resin end seal.
Metallized polypropylene capacitor for ac
Cbb65 are non-inductively wound with metallized polypropylene film as the dielectric/electrode with "ul"leades and encapsulated in a plastic case sealed with epoxy resin.
* High voltage capacitor
* Film capacitor
* plastic capacitor
* high pluse capacitor
CBB81 are non-inductively wound with metalized polypropylene film in series with aluminum foil, and polypropylene film, with cooper-clad steel leads and epoxy resin coating. They are ideal for high frequency and high pluse rise time circuits, and find wide applications in snubbers, high voltage power supplies and electronic lighting ballasts.
Features:
High corona starting voltage
High current rating and high dv / dt
Series electrode construction
Self-healing properties
Specifications:
Operating temperature: -40 -- +85C
Capacitance range:0.001uF -- 0.1uF
Capacitance tolerance: 5%(J), 10%(K)
Rated voltage:1000/ 1250/ 1600/ 2000VDC
Dissipation factr:0.1% max. at 1KHz, 25C
Insulation resistance:50,000 MOhm min. for 0.1UF
Dielectric strength: 150% of rated voltage for 5 sec.
JFMA - Box Type Metallized Polypropylene Film Capacitor For Capacitive Divider Specifications
Operating Temperature -40 C +105 C JFMA-Box-Type -Metallized-Polypropylene-Film-Capacitor-For-Capacitive-Divider
Rated Voltage 400V(230VAC) 630V(275VAC/305VAC/310VAC)
Capacitance Range 0.0047 3.9F
Capacitance Tolerance 5%, 10%
Insulation Resistance C0.33 f ; IR 50000MOhm
C 0.33 F ; IR 15000MOhm
Dissipation Factor 0.1% max. at 1KHz, 20C
Dielectric Strength 160% of rated voltage for 60 sec.
Axial Features
1. Quick transient design
2. High Precise Capacitance ±3%, ±5%
3. Very Low Dielectric absorption factor
4. Very Low Dissipation factor
5. Very Low ESR
6. Very Low Inductance
7. Excellent handling of high current audio pulses
X2-MKP are non-inductively wound with metallized polypropylene film as dielectric and electrode, with copper-clad steel leads, encapsulated
in solvent-resistant and self-extinguishing UL94 V0 thermoplastic case, with epoxy resin sealed. They provide interference suppression with
safety approvals. They are Suitable for across the line capacitors, EMI filters, Spark killer circuits, etc.
Features:
Self-healing properties
High moisture resistance
Overvoltage stress withstanding
Flame-retardant plastic case and epoxy resin
Specifications:
Operating temperature: -40 -- +100C
Capacitance range:Capacitance range:
Capacitance tolerance: 10%(K)
Rated voltage:275VAC (50Hz/ 60Hz)
Dissipation factr:0.1% max. at 1KHz, 25C
Insulation resistance:15,000 MOhm min. for Q0.33UF 5,000 MOhm*uF/C min. for C>0.33uF
Dielectric strength: 1200VDC for 60 sec. or 2000VDC for 1 sec.
Apply to 50/60hz, high quality, wire lead-out structure, widely used as the start-up and running capacitor that is special for micro water pump, cleaning machine washing machine, and single-phase water pump motor.
Apply to 50/60hz, high quality, wire lead-out structure, widely used as the start-up and running capacitor that is special for micro water pump, cleaning machine washing machine, and single-phase water pump motor.
Jb capacitors manufactures x2 metallized polypropylene film capacitor, which also named interference suppression capacitors or x2 safety capacitors, and we sell quite competitive prices. This x2 safety capacitor has 3 approval markings: vde, enec and ul. Following are x2 metallized polypropylene film capacitor features, specifications and drawing.
Characteristics
1. Highly reliable because of its excellent Self-Healing performance.
2. Dissipation Factor is normally low and it is #stable #against #high #frequency and change of temperature.
3. Recommended for #high- #frequency #circuits like s-curve compensating circuit
Series MPF(CBB21) MPB(MKP21)
Applications Blocking,coupling,decoupling,filtering ,by-pass,it is popular for using as filter in PFC circuit of SMPS ,Ballast,Adapter
Rated Voltage 100VDC,250VDC,400VDC,630VDC
Reference specification IEC60384-16(GB/T 10190)
Climatic category 40/105/21
Rated Temperature 85℃
Operating Temperature Range -40℃-+105℃, (+85℃~+105℃);derating factor 1.5% per ℃ for UR(VDC)
Dielectric Metallized Polyester film
Capacitance Tol. ±5%(J),±10%(K),
Voltage Proof 1.6xUr(VDC),2s(between terminal)
Dissipation Factor ≤0.10%(1KHZ at 20~25℃)
Insulation Resistance ≥30000MΩ,Cr≤0.33µF(20℃,100V,1 min);10000s,Cr>0.33µF(20℃,100v,1min)
packing Cutting,kinked/loose&PE Bag
1. Ideal for high frequency circuits high-current loading and high definition TV,
monitor display S-shaping correction.
2. The armor is a powder coated flame resisting epoxy resin.(UL 94 V-0)
3. Temperature coefficient of capacitance is negative and almost constant.
4. Small tan ,good high-frequency performance and with temperature changes,suitable for high voltage.
5. High insulation resistanec,long life due to self-healing effect.
6. Non-inductive structure made by a special metal spraying process.
Jb capacitors company, leading manufacturer for film capacitors since 1980, produce 22 series film capacitors with top quality level.
Here we strongly recommend our top seller jfv x2 mkp film capacitors to you as below. Welcome to contact with us for your inquiry or order.
Part name: jfv x2 metallized polypropylene film capacitors ( interference suppression capacitors / class x2)
-- jfv x2 with enec, vde, ul approval for 275vac, 305vac, 310vac.
-- bulk (loose) and ammo tape package both available; cut leg and long leads on request.
-- jfv x2 have unbeatable prices
-- fast delivery, some items have stock available.
-- very stable quality, fast sales response, good service
-- cross reference available on website
Bulk or ammo package, please contact with our sales at dena@jbcapacitors.Hk
Introduction
1.Low D.F.
2. High stability against frequency and temperature variation.
3. Suitable for high frequency and/or pulse application.
4. Negative temperature coefficient.
5. Non-inductive construction.
6.Low equivalent series resistance.
Specification:
1.Operating temperature : -40óxc ~ + 85óxc
2.Capacitance range : 0.001~0.68uf
3.Capacitance tolerance : í=1%(f), í=2%(g), í=5%(j), í=10%(k)
4.Rated voltage : 50/100vdc. 250vdc. 400vdc. 630vdc.
5.Dissipation factor :0.08%max at 1khz, 25óxc
Cbb65 ac metallized polypropylene capacitor
Using zn-al thickenede metallized polypropylene film as the medium tightly rolling by the high-speed winding machine in aluminum wrapper, refined evegetable oil or capacitor wax impregnation treatment under vacuum at elevated temperatures, making the performance stable, long-life spans.The second-generation mechanical ecplosion-proof dsign make higher reliability and security.
Execution standard:gb/t3667.1-2005
Climate type:40/85/21
Tolerance of capacity:ía3%
Insulation resistance:í²5000súªmicro;fi.R
Flectrodes voltaget-t:2uníó2seconds
Very shell voltaget-c:í²2200vac;2seconds
Loss tangent:tgªSín0.002(50hzí½100hz)
