Today, carrying out its operations in the facilities located at Gebze Organized Industry Zone on a land covering 25.500 m², with a 40.000 tons/year capacity, exporting its high quality & performance products which are also certified by international authorities, to more than 40 countries. its high-quality products in 5 main categories, -Metal Working Oils, Industrial lubricants, Automotive lubricants, Greases and Marine lubricants- in 34 product groups with 1.000 different synthetic, semi-synthetic and mineral type of products to the industry and consumers worldwide. Please contact us for order detail
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.
Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.
Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.
451936 Metal Working Oils Suppliers
Short on time? Let Metal Working Oils sellers contact you.
Power Selections
38HP Gas
35HP Diesel
25HP 3Ph Electric
Max. Log Diameter 36"
Max. Width of Cut 28"
Wide - 34"
Max. Depth of Cut 10-1/2"
Max. Length of Cut 21'
Max. Length of Cut w/ Bed Extensions 45'
Bed Extensions 6', 12', or 24' Bed Extensions
Max. Log Weight 4,400 lbs
Sawhead Forward/Reverse
High-Output 12V Electric Power Feed
Sawhead Up/Down Electric with Accuset2 Setworks
Side Supports
4 Hydraulic Side Supports
Log Clamps 1 Hydraulic
Bed Leveling Feet 6 Adjustable Outriggers
Trailer Package Standard
Blade Lubrication 5 Gal. Water Tank with Automatic Flow
Product Details:
Product Type : Metal Products
Supply Ability : 2500000 Kilograms Per Month
Price And Quantity
Minimum Order Quantity : 50 Kilograms
Product Specifications
Product Type : Metal Products
Trade Information
Payment Terms : Cash in Advance (CID)
Supply Ability : 2500000 Kilograms Per Month
Delivery Time : 1 Week
Main Domestic Market : All India
Product Description
The Metal Nuggets in mining is a solid lump of metal. This is majorly nuggets of gold but can be of copper, platinum, silver and other various metals. It is golden in color with small lumps or can say fragments used for crafting various components such as decor pieces, gifting items, jewelry and more. It is basically water worn pieces of metals that are weathered out of an original lode.
Malaysia Rapeseed Oil (not Russia)
CIF U$980-1060ï¼?could provide maximum 21-24 MT/month. Provider is US big company.
This is NOT 100% confirmed so far (too welcome). Need your realistic LOI within 12 hours, otherwise it's invalid.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Palm oil is derived from the flesh of the fruit of the oil palm species E. Guineensis. In its virgin form, the oil is bright orange - red due to the high content of carotene.
Palmoil is semi - solid at room temperature; a characteristic brought about by its approx. 50 percent saturation level. Palm oil (and its products) has good resistance to oxidation and heat at prolonged elevated temperatures; hence, making palm oil an ideal ingredient in frying oilblends. Manufacturers and end - users around the world incorporate high percentages of palm oil in their frying oil blends for both performance and economic reasons.
In fact, in many instances, palm oil has been used as 100 percent replacement for traditional hydrogenated seed oils such as soybean oil and canola. Products fried in palm oil include potato chips, frenchfries, doughnuts, ramen noodles and nuts.
The oil palm produces two types of oils; crude palm oil (CPO) from the fibrous mesocarp and crude palm kernel oil (CPKO) from the kernels. Although both oils originate from the same fruit, palm oil is chemically and nutritionally different from palm kernel oil. It is one of the only two mesocarp oils available commercially, the other being olive oil.
In conventional milling process, the FFB's are steriliszed and the fruitlets stripped off. The loose fruitlets are then digested and pressed to extract the CPO. The kernels are separated from the fibrous mesocarp in the press cake and later cracked to obtained CPKO.
CHEMICAL COMPOSITION OF PALM OILS:
Crude Palm Oil is the richest natural source of Tocotrienols. The Malaysian Palm Oil Board (MPOB) has developed a special patented technology for extraction. The latest technology to purify Tocotrienols from the fruits of oil palm (Elais guineensis) was developed to produce a superior quality and purity.
PALM OIL
Palm oil, being a vegetable oils, is cholesterol - free. Having a naturally semi solid characteristic at room temperature with a specific origin melting point between 33'C to 39'C, it does not require hydrogenation for use as a food an ingredient.
CPO is deep orange red in colour due to the high content of natural carotenes. Palm oil is rich source of carotenoids and vitamin E which confers natural stability against oxidative deterioration.
Fractionation separates oil into liquid and solid fractions. Palm oil can be fractionated into liquid (olein) and solid (stearin) components.
Palm oil has a balanced ratio of unsaturated and saturated fatty acids. It contains 40% oleic acid (monounsaturated fatty acid), 10% linoleic acid (polyunsaturated fatty acid ), 45% palmitic acid and 5% stearic acid (saturated fatty acid). This composition results in an edible oil that is suitable for use in a variety of food applications.
WE SUPPLY IN;
PET 5 L
PET 1 L
25 L
Customer chice of parcking (T&C applicable)
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999
Cu 999
Element0005
Copper9999 Min
Lead0005 Max
Bismuth05 Max
Total impurities03 Max
Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94
Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch
Shall consist of clean untinned uncoated unalloyed
copper wire and cable not smaller than No 16 B S
wire gauge free of burnt wire which is brittle
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
JoCamDeal Inc supplies premium metal scrap for global industrial applications. Our range includes heavy melting steel (HMS 1 & 2), shredded scrap, cast iron, and steel turnings. Sourced from trusted yards and processed with strict quality checks, our scrap meets international recycling and melting standards. Perfect for steel manufacturing, re-rolling mills, and foundries, our products help reduce raw material costs and support eco-friendly production. We ensure clean, contamination-free shipments and offer flexible supply volumes based on client needs. With efficient logistics and global reach, JoCamDeal Inc delivers reliable, on-time service you can count on.
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details.
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%.
Type: HMS Scrap
Composition: iron Scrap Metal
Application: Melting
HMS Type: HMS1 & 2
Packaging Details: Bulk and Customers preferences
d) All scraps shall be free of explosive and oily materials and woody substance in any event.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products.
Product name Iron scrap
Type Casting iron, Iron scrap
Metal 100%
Alloy or not Non-alloy
Secondary or not Non-secondary
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
