Production:Medical Polymer Orthopedic Splint which is designed specifically for Fixation for fracture , sprain and pull.
Product Details
Production:Medical Polymer Orthopedic Splint which is designed specifically for Fixation for fracture , sprain and pull.
Product description
Good waterproofing quality The moisture -absorbed percent is 85% less than plaster bandage, Even the patient touch the water situation, it still could keep dry in the injury position.
Comfortable & safe to patient/doctor Material is friendly to operator and it wont become tension after concretion.
Usage method
1?Choose the appropriate size splint according to different parts.
2?According to the actual needs, the splint is shaped and trimmed. The curing time is 3 to 5 minutes, and it is wrapped and fixed with ordinary gauze bandage or elastic bandage. After 20 minutes, it can bear full load.
Matters needing attention
1?Avoid use in areas where swelling may occur.
2?When the packing is damaged, it is forbidden to use it; it is forbidden to reuse it.
ConMed is a global medical technology company that provides a variety of surgical and medical devices, including products in the field of orthopedics. The company offers a range of solutions for orthopedic procedures, such as arthroscopy and electrosurgery. Some of the orthopedic products provided by ConMed may include arthroscopic instruments, power systems, and other tools used in orthopedic surgeries.
126663 Medical Orthopedic Splints Suppliers
Short on time? Let Medical Orthopedic Splints sellers contact you.
is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.
Description of orthopedic casting tape:
It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint.
It is the upgraded and replaced product of the traditional plaster bandage.Age.
Advantages of orthopedic casting tape:
High strength, light weight molding fast
Good air permeability
Excellent x-ray radiolucency
Waterproof
Environmentally friendly
Simple operation
Operation of medical disposable casting tape:
1. Wear the surgical gloves and choose the proper specifications.
2. Put the cast padding or stockinet on the fixed part.
3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll.
5. Shape according to the need, smooth and rub the surface to achieve good contact between layers.
6. Use the electric cast saw to cut and remove it.
Certificates of orthopedic casting tape: ce & fda
Package:oem service is available
Storage & warranty:
Be careful not to break the packaging
Storage at room temperature
Shelf-lift: 2 years
Shipping: within 15 working days after payment
Exhibition:
Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
Prince is a Malaysian FDA510 brand. It has factories in Malaysia and Vietnam. It can provide a considerable amount of NITRILE gloves each month, including medical and civilian use, and the quality fully meets the international and FDA, CE, EN and other standards.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 - 0.30
buyer team 70%
our team 30%
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 inclusive $0.3 Commission
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
Superior US OTG
Documents are ready.End-buyer need zoom in with seller mandate before sending documents.
First order 50M
Escrow accepted by both lawyers
11.5$ all in
0.53$ for buyer side.The rest of 0.27$ is shared equally between you and us.
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA
STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA
STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
Price 12MX26 WEEKS
Payment Term 7% Deposit to Hartalega factory director 93% LC
ALLOCATION Hartalega 12MX26 WEEKS
Price $ 9.25+$0.20 buyer part $0.1 Seller Part $0.1
SOP
1. NCNDA LOI POF IMFPA SPA Signed invoice
2. 7%TT directly to HartalegaFactory
3. Delivery schedule
Full payment 2 weeks prior to each shipment, unless we provide up to Net90 payment terms, depending on our buyer's creditworthiness**
NOTE we're a distributor & can work it out with them._
