Portable medical oxygen cylinders design and manufacture by net, are produced through advanced technology. Comparing with conventional respirators, we use aluminum or aluminum composite cylinders instead of steel ones, with weight reduction of 40%-70%. More preferable for people with breathing problems. Full specifications meet different customers¡¯ demands. Working pressure: 150bar-200bar. Valves, fittings and threads according to customer¡¯s requirements. Please google ¡°netcylinders¡± to find our web for more information.
This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification.
PREMIUM CONSTRUCTION
Reconditioned
High-quality aluminum body
Clearcoat protected
Medical green rust-resistant painted dome
CGA870 medical post valve installed
Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve)
Weighs approximately 6 pounds
Capacity 14.6 cubic foot
2015 PSI service / 3360 PSI test pressure
Stamped DOT-3AL2015
5-year retest interval
Recertified test within 180 days prior to shipment
PE Fish Net (mix Color) Bales Scrap/waste.
Materials are POST INDUSTRIAL.
Can load in 1x40HC container approx. 26 MT (+ 10%).
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Net beverage cylinders are made by aluminum 6061, with 40% weight reduction than steel cylinders. Unique internal and external treatments provide a superior corrosion resistance assuring gases clean and smelless. Cylinders are made strictly to safety standards all over the word, assuring a consistent and stable performance. High standard quality control and detailed instruction for use & maintenance make sure safety operation and performance.
Prince is a Malaysian FDA510 brand. It has factories in Malaysia and Vietnam. It can provide a considerable amount of NITRILE gloves each month, including medical and civilian use, and the quality fully meets the international and FDA, CE, EN and other standards.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 - 0.30
buyer team 70%
our team 30%
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
Ansell Edge $ 15.30process (inclusive0.30 for buyer party
SOP For Ansell edge
Price $15.30 inclusive $0.3 Commission
-Buyer to provide Loi, NCNDA, ICPO if intermediate company involved, POF if required
Within 1day
-Seller will provide FCO
-Buyer to give FCO Counter sign and provide ICPO
Within a day
*After signing SPA-Seller can show authorisation letter* (As requested to seller) in Zoom meeting
Spa signed by both party
Seller to provide PI
Same day of PI Shared
-*LC TRANSFERABLE, IRREVOCABLE, DIVISIBLE and REVOLVING at site*
Within 3 days
-LC needs to be open within 3 days
Within 5 to 7 working days after verification of LC
Allocation letter for complete order from manufacturer, along with required documents,
Schedule of the deliver is provided with quantity
-Material SGS to be intimated prior to buyer
-At buyer cost SGS for material done at the FOB Port Klang
-After SGS
LC cleared on the invoice value immediately
If seller or buyer FAILS to proceed the deal after signing SPA and opening of LC 2% penalty will be applied.
Superior US OTG
Documents are ready.End-buyer need zoom in with seller mandate before sending documents.
First order 50M
Escrow accepted by both lawyers
11.5$ all in
0.53$ for buyer side.The rest of 0.27$ is shared equally between you and us.
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA
STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
The commission for this price next week may not be available again: $17.50, including 0.50 commission, the higher opening is for the buyer, Make Up is buyer: This stage Please prepare
-LOI
Payment: SBLC 2 months
FOB Malaysia $17.5,
0.5 dollar commission start from your steam.
MOQ 5 M x 12 months
Maximum 30 M x 12 months
-POF
-NCNDA
STANDARD OPERATING PROCEDURE (SOP)
1.SUBMISSION
1.1 NCNDA (From End Buyer to Seller Mandate)
1.2 LOI
1.3 BCL
1.4 ATV-Funds Verification
1.5 LOA-Buyer Mandate (It is reqiured, if LOI is not issued by End Buyer)
2. FCO
3. ICPO
4. SPA + NCNDA (Seller)
5. PI
6. DRAFT LC/SBLC
7. ALLOCATION LETTER CONFIRMATION (Show via zoom meeting)
8. OFFICIAL LC/SBLC (Irrevocable, Transferable, Divisible and Revolving)
9. IMFPA
10. SGS Inspection (Cost will be charged with Buyer)
11. SGS, Certificate of origin will be supplied together with relevant documentation as SPA
12. LC Release & Goods Deliver
"We will proceed further if you can accept our SOP only"
Price 12MX26 WEEKS
Payment Term 7% Deposit to Hartalega factory director 93% LC
ALLOCATION Hartalega 12MX26 WEEKS
Price $ 9.25+$0.20 buyer part $0.1 Seller Part $0.1
SOP
1. NCNDA LOI POF IMFPA SPA Signed invoice
2. 7%TT directly to HartalegaFactory
3. Delivery schedule
Full payment 2 weeks prior to each shipment, unless we provide up to Net90 payment terms, depending on our buyer's creditworthiness**
NOTE we're a distributor & can work it out with them._
