Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)
Conversion mode
Medium conversion, storing and forwarding
Mac address table
I k
Buffer space
1mbit
Flow control
Full duplex state: flow control; half duplex state: back pressure mode
Delay
9.6us
Bit error rate
<1/1000000000
Mtbf
100, 000 hours
Led
Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)
Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:
Interface:
Left side:
One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)
Right side:
One rs-232 console port (rj-45 connector)
One power jack
Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Media Converter, 10/100M 1310nm SM 5km
Fiber optic media converter
Skype:wirenettehnology
Features :
Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.
Surporting : The transmission of extra-long packes over VLAN
Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users.
Technical specifications
Parameter
Specifications
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
10M/100M media converters and 1000M media converters
Products capability:
According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab
Support long data packet
Easily for setting and debugging
Technology specification:
Wavelength:1310nm and 1550nm
LAN port speed:10M/100M and 1000M
Transimission distance:20km 40km 60km 80km 120km
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time
Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console
They can realize the integrated management to all chassis.
Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control
Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port.
Supporting remote and local management.
With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters.
Built-in ip-based web interface.
Supporting remote and local management.
Store and forward mechanism, supporling ieeee 802.3x frame flow control for full-duplex mode
Manual ip address setting/dhcp client for ip address assignment.
Event trap and snmp trap support.
Password setting, ip setting and devices description setting through planet smart discovery utility
Choice of fiber-connector from sc, lc, wdm, multi-mode / single-mode fiber /1000base-sx / lx mini gbic module.
10gbps fiber to copper media converter for long distance transmission
Network management function web snmp console
Support dmi function for sfp+ fiber module
Support itut prescribed dwdm/cwdm wavelength
Media converter for network backbone(san, lan, man)
Support 2u rack (16 channel) and standalone use
Support jumbo frame
Sfp+ fiber module detection, utp cable length detection
Support hot plugging
Type: rj45 to/from sfp+.
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
Supporting : Full duplex and half duplex transmission and capable of automatic negotiation.
efficient built-in switching core ,to implement flow control and reduce broadcast packets.
Supporting : The transmission of extra-long packets over VLAN.
Supporting : The selection of multiple types of fiber ports such as dual-fiber multi-mode.
dual-fiber single mode and single fiber single mode, to satisfy the extended requirements of users.
Parameter:
Parameters Specifications
Access mode 10/100/1000Mbps Gigabit Ethernet
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber multi-mode: 220m (fiber size: 62.5/125¦m)/550m(fiber size: 50/125¦m)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km
Single-fiber single-mode: 10/20/40/60/80Km
Category-5 twisted pairs: 100m
Port One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: dual-fiber multi-mode SC (fiber size: 50,62.5/125¦m) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Single-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Conversion mode Medium conversion
Delay <10¦s
Bit error rate <1/1000000000
MTBF 100,000 hours
LED POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action)
Power AC220 0.5A/DC-48 (builtin)
Power consumption internal power supply or external power supply: AC100 265V / DC5V
Operating temperature -10~55
Operating humidity 5%~90%
Storage temperature -40~70
Storage humidity 5%~90% (non-condensing)
Dimensions 26mm(H)*70mm(W)*98mm(D) (height*width*depth) (builtin power)
120mm(H)*24mm(W)*78mm(D) (depth*width*height) (module card)
Ordering Choice:
Model
Working wavelength
Fiber
Electrical port
Fiber model
Tx power(dBm)
Rx power(dBm)
Transmission
TRX E1-10/100Base-T developed by Hengguang Technologies, employs the clarity E1 transmission channel in accordance with ITU-T G.703 advice and IEEE802.3 standard with independent intellectual property. It is a kind of remote transmission equipment transmitting 10 Base-T data. With an independent structure, TRXE1-10Base-T can transmit 10Base-T data through E1 channels and extend work distance of the interface between two Ethernets through E1 channels such as optical fiber, microwave DDN nets and so on.
It can use the existing communication network structures and interfaces efficiently without impropriating optical fiber core or additional equipment.
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance ranges from several kilometer to hundred kilometer.
Media Converter is one technical product that was used to change the optic signal to electric signal,which help us solve the problem how transmitt the signals through a long distance,as the development of the information age,media converter become more and more popular, They are available between the fiber lines and cable lines.And they have obtained a big market in, telecommunications, broadcasting, railways, military, finacial, securities, customs civilaviation, shipping, local area network ,CATV
Features
1.Support EEE802.3protocol,IEEE802.3u,100Base-TX,100Base-FX,IEEE802.3Z,1000Base-t Ethernet Standard
2.Support full-duplex and half-duplex transmission mode
3.Provide one or moer switching twisted pair ports of 10Mbps/100Mbps self_adaptive or 1000Mbps, 10Mbps/100Mbps/1000Mbps self adaptive and one 155Mbps or 1.25Gbps fiber interface.
4.Support up to 1552 byte long packet transmission
5.Supply the optical fiber transmission of dual-fiber multi-fiber,dual-fiber signel_mode and single-fiber single-mode.
6.External and internal power can be choosed
7.media converter with external power supply can match with 2U-14 slots rack and card-inserted type media converters can match with 2U-16 slots rack
8. Comprehensive LED
9. Port support Auto-MDI/MDIX automatic reverse
Applications
1. apply to ready to rise to 10M extended enterprise network bandwidth 1000M
2. apply to images, voice and other multimedia data on an integrated transport network
3. point applies to the computer signal transmission in need of the occasion
4. widely used for computer data transmission network to meet a variety of business needs
5. apply to the campus broadband network, broadcasting network and intelligent residential broadband fiber-to-floor fiber to the home data transfer
6. with the switches and other computer network equipment can be combined to form:-chain, star, ring-type network and other computer networks
SPC-10/100/1000M Series Media Converter can be used in the telecommunication IP MAN broadband optical network solution for its steady performance and powerful function.It convert 1000bps Ethernet copper port to optical port,up to 80km distandce on single-mode fiber without any relay device.It support auto-sending 10/100/1000Mbp half/full duplex topology,and MDI/MDI-X auto recognize. Selectable SC, FC, ST optical port makes the networks more flexible and feasible for the possibility of cost reduction.
Media converter
In conformity to ieee 802.3 10 base-t standard.
In conformity to ieee 802.3u 100 base-tx/fx standard.
Max. 2m buffer memory built in chip.
Back pressure flow control for full duplex ieee802.3 xand half duplex.
Automatic identification of mdi/mdi-x cross line.
High-performance1.4gbps memory bandwidth.
In conformity to safety code of fcc and 15 class a and ce mark.
Outside power supply:26mm*71mm*94mm
Built-in power supply:40mm*110mm*140mm
Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
2.Technical Parameters
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter
Number of Network Ports1 channel
Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter
Transmission Rateself-adaptive 10/100/1000M
Protocol supportedIEEE802.3/IEEE802.3U etc.
Fiber TypeSingle Fiber
Optic modeSingle Mode
Transmission modehalf / full duplex
Overall Power
1.Introduction
10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
2.Features
In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX
Supported Ports: SC for optical fiber; RJ45 for twisted pair
Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
Auto MDI/MDIX supported without need of cable selection
Up to 6 LEDs for status indication of optical power port and UTP port
External and built-in DC power supplies provided 128 K's data buffer RAM
Support for low-delay time pure data transmission and full/half-duplex flow control.
Built-in watch-dog timer to monitor any error in internal data exchange
17480 Media Converter Suppliers
Short on time? Let Media Converter sellers contact you.
