Low channel crosstalk, high stability, high reliability
Simple control, small size, easy to embed in the circuit board
Locking and non-locking control types can be selected
Mechanical Optical Switch(XH-OSW-2X2F)
Parameter :
parameter Parameter value
model XH-OSW-2X2F
Insertion loss dB Typ 0.5 Max 1.0
Wavelength range nm 800~1310 & 1260~1650
Working wavelength nm 850/980/1310 & 1310/1550/1625
Return loss dB MM 30 & SM 50
Channel crosstalk dB MM 35 & SM 55
PDL dB 0.05
WDL dB 0.25
TDL dB 0.25
/APC LP: LC/PC LA: LC/APC X:other
1N rack-mounted fiber optic switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
1xN mechanical optical switch is a kind of light path control equipment,Can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
Low Insertion Loss
Wide Wavelength Range
TTL level control, easy to control
Imported components, better stability
Drive circuit breakdown self check function
Modular design, convenient for secondary development
XH-OSW-1 128 mechanical optical switch is a kind of light path control equipment.
It can realize multi-channel fiber optic light path switching. In the optical
fiber transmission system, it is used for multi-channel fiber monitoring,
multi light source/detector selection, and optical fiber path protection etc.
Besides, it is also used in optical fiber test system for optical fiber and
related component test, outdoor cable test and multi-spot optical sensors
monitoring system.
Feratures
Low Loss and High Reliability
Parallel Interface (TTL)
Modularized Design
Epoxy-free on Optical Path
Drive Circuit Breakdown Self-checking Function
Applications
Ring Network
Remote Monitoring in Optical Network
Testing of Fiber Optical Component
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity
Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process.
Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products.
Parameters
1.process arrange diameter of round shape onion 30-150mm.
2.capacity 1000-1500kg/h
3.Power 3kw
4.Voltage 380V
5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw
6.Machine size 1.5*1.3*1.4m
7.Weight 420kg
Start working flowing:
1.Fill onion in the loading box
2.Start the pneumatic valve switch
3.Start the power-supply switch
4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin
5.When finished adjusting ,The equipment operates normally and automatically.
The OSW-2X2 Mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configuration s and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all OSW-2X2 Mechanical optic switch features low insertion loss,high extinction ratio,high channel isolation,and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure,longevity,operation under shock/vibration environment and large temperature variations,and fast response time.The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.
Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
GLSUN 12H Mechanical Optical Switch Fiber Switch Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
GLSUN 12H Mechanical Optical Switch Fiber Switch Applications
R&D in Laboratory
System Monitoring
OADM
MAN (Metropolitan Area Network)
Network Security and Monitoring
GLSUN 12H Mechanical Optical Switch Fiber Switch Specifications
Parameters Unit SUN-FSW-12H
Wavelength Range nm 1260 ~ 1650
Test Wavelength nm 1310 / 1550
Insertion Loss 1, 2 dB Typ: 0.8 Max: 1.0
Return Loss 1, 2 d 50
Crosstalk 1 d 55
PDL dB 0.05
WDL dB 0.25
Repeatability d0.02
Operating Voltage V 3.0 or 5.0
Durability Cycl 10 Million
Switching Time m8
Optical Power m 500
Operating Temperature -20 ~ +70
Storage Temperature -40 ~ +85
Relative Humidity % 5 ~ 95
Weight g 14
Dimension mm (L )22.5(W)11.8(H)10.2 �±0.2
Note: 1 Within operating temperature and SOP.
2 Excluding Connectors.
Product Description
2x2BA Mechanical Optical Bypass Switch - Introduction
SUN-FSW-2x2BA Mechanical Optical Bypass Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)55.0x(W)26.0x(H)10.0mm. It is an ideal component for OADM, OXC, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.GLSUN fiber optic switches can be widely used in optical network protection, transmitter and receiver protection, network test system and instrumentations.
Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
Applications
R&D in Laboratory
System Monitoring
OADM
MAN (Metropolitan Area Network)
XH-OSW-2X2B bypass mechanical optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize that the whole optical path cannot communicate normally when the power failure occurs at a certain point of the single-fiber multi-point equipment. Bypassing the power-off point, the optical path can operate normally. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment.
Features
Low insertion loss, wide wavelength range
Low channel crosstalk, high stability, high reliability
Simple control, small size, easy to embed in the circuit board
Locking and non-locking control types can be selected
Performance
Parameter Parameter Value
Model XH-OSW-2X2B
Insertion loss dB Typ 0.5 Max 1.0
Wavelength Range nm 800~1310 & 1260~1650
Working Wavelength nm 850/980/1310 & 1310/1550/1625
Return Loss dB MM 30 & SM 50
Channel Crosstalk dB MM 35 & SM 55
PDL dB 0.05
WDL dB 0.25
TDL dB 0.25
Repeatability dB ±0.02
Switching Times Times 107
Switching Time ms 8
Transmission Power mW 500
Operating Voltage V 3 or 5
Operating Temperature -20~+70
Storage Temperature -40~+85
Package Cize mm (L)27.0 (W)12.5 (H)8.4 ±0.2
Mechanical Optical Switch Module XH-OSW-1X12 is an optical path control device, with the role of controlling the optical path and converting the optical path, the size of this module can be up to 12 channels; can achieve multiple optical signal input, select the signal output of one of the channels or vice versa (to support bidirectional use), the module control mode using TTL high and low logic level control, the microcontroller chip pins can be directly driven control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fiber, optical devices, networks and field engineering optical cable testing; optical device mounting.
Features
hLow insertion loss, wide wavelength range
Low channel crosstalk, high stability, high reliability
Imported motor components, higher reliability of life
Failure self-test function in internal circuit design
Simple control mode, small size, easy to embed in the system
Parameter
Parameter Parameter value
Model XH-OSW-1XN N 12
Insertion loss dB Typical value: 0.5 Maximum value: 0.8
Wavelength range nm 800~1310 1260~1650
Working wavelength nm 850/980/1310 & 1310/1550/1625
Return loss dB Multimode 30 & single mode 50
Channel crosstalk dB 70
Polarization dependent loss dB 0.05
Wavelength dependent loss dB 0.25
Temperature dependent loss dB 0.25
Repeatability dB 0.02
Switching times Times >107
Switching time ms 8
Transmission power mW 500
Power supply V/mA 5/600
Operating temperature -20~+80
storage temperature -40~+85
Package size mm 80 40 32
XH-OSW-4-8 mechanical optical switch is a kind of light path control equipment. It can realize multi-channel fiber optic light path switching. In the optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and related component test, outdoor cable test and multi-spot optical sensors monitoring system.
Feratures
Low Loss and High Reliability
Serial Interface (RS-232)
Modularized Design
Epoxy-free on Optical Path
Applications
Ring Network
â?¢Remote Monitoring in Optical Network
Testing of FiberOptical Component
Specifications
Parameter Parameter Values
Model XH-OSW-4X8-N
Insertion Loss 1.5 dB
Wavelength Range 1260~1650 nm
Fiber Type 9/125um
Return Loss 50 dB
Crosstalk 55 dB
PDL 0.10 dB
WDL 0.30 dB
TDL 0.30 dB
Repeatability 0.05 dB
Lifetime >107
Switching Time 20 ms Adjacent channel
Connector LC/UPC
Control Mode RS-232
Working Power Supply 5V/800 mA
Product Sze 135x64x32
Operating Temperature -20 to +70
Operating Temperature -40 to +85
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
low insertion loss
wide wavelength range
low crosstalk
high stability, high reliability
epoxy-free on optical path
latching and non-latching
Glsun 1*2h optical switch - applications
r&d in laboratory
system monitoring
oadm
man (metropolitan area network)
Glsun sun-fsw-1*2h optical switch, which is famous for its high performance, low insertion loss and compact dimension: (l)22.5*(w)11.8*(h)10.2mm. It is an ideal component for oadm, oxc, system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
Glsun 1*2h optical switch - specifications
Model : sun-fsw-1*2h
Wavelength range 850+/-40 / 1300+/-40 1260 ~ 1650
Test wavelength 850 / 1300 1310 / 1550
Insertion loss1, 2 typ:0.8 max:1.2 typ:0.8 max:1.0
Return loss1, 2 mm = 30 sm = 50
Crosstalk 1 mm = 35 sm = 55
Pdl =0.05db
Wdl =0.25db
Repeatability =0.02db
Operating voltage: 3v or 5v
Durability= 10 million
Switching time =8ms
Optical power =500mw
Operating temperature -20 ~ +70?
Storage temperature -40 ~ +85?
Relative humidity 5 ~ 95%
Weight 14g
Dimension (l )22.5*(w)11.8*(h)10.2 *0.2mm
Note:
1 within operating temperature and sop.
2 excluding connectors
GaAs Wafers
Gallium Arsenide (GaAs) wafers are critical components in modern electronics and photonics due to their superior electrical and optical properties.
Here�¢??s a focused overview:
GaAs�¢?? is shorthand for Gallium Arsenide, a compound made up of two elements, and the semiconductor used to manufacture GaAs wafers. GaAs is used as a direct bandgap semiconductor, which in layman�¢??s terms, simply means that particles such as electrons can pass through components much quicker and with very little interference. This makes them particularly useful in optical devices because photons, the basic unit for all light, can pass through lenses with ease.
What are GaAs Wafers Use For?
The use of GaAs wafers is dictated by the capabilities of the compound. Because GaAs is a direct bandgap semiconductor, it is especially useful in sensitive electronic equipment that requires amplifying low frequencies. Some of the most common applications for GaAs wafers include:
