Used for In vitro diagnostic (IVD) products such as diluent, wash, buffers, and detergents. Broad-spectrum bacteriostatic agents, can effectively inhibit most bacteria and fungi.
Part No. GB01025
CAS NO: 78491-02-8
EINECS NO 278-928-2
Ingredients Diazolidinyl Urea
Assay â?¥98.0%
Molecular Formula C8H14N4O7
Molecular Weight : 278.23
Applicable PH range 3~9
Brand: Neocide�®
Packaging Pkg of 1kg/10kg/20kg
Storage Room temperature
Shelf life 2 years
1. Basic Information
Chemical Name Diazolidinyl Urea
CAS: 78491-02-8
EINECS: 278-928-2
Molecular Formula: C8H14N4O7
Molecular Weight: 278.22
Synonyms: Germall-II
2. Physical and Chemical Properties
Appearance: White powder.
Solubility: Very soluble in water; freely soluble in propylene glycol and glycerin;slightly soluble in methanol and ethanol; not soluble in mineral oil
3. Quality Specification
TEST ITEM SPECIFICATION
Appearance White powder
Odor less or slight characteristic odor
Nitrogen 19.0-21.0%
Loss on Drying 3.0% max
Residue on Ignition 3.0% max
PH 6.0-8.0
Heavy Metal 10ppm max
4. Packing
Standard packaging includes the following:
25kg per drum, 25kg/carton
Other package sizes are available upon request.
5. Storage
Store in a well-ventilated, cool, dry area, out of direct sunlight. Keep containers tightly closed when not in use.
6. Period of validity
36 months
7. Application
It is effective against Gram-negative bacteria, incl Pseudomonas aeruginosa. It provides a complete antimicrobial preservative system that is active against bacteria, yeast and mold.
Diazolidinyl Urea, is permanently listed by the EU at levels up to 0.5% without restrictions.
And it is safe for both leave-on and rinse-off products and provides effective protection at low concentration levels. It is typically used at concentrations from 0.1-0.3%.
GERMALL PLUS is a combination of Diazolidinyl Urea and IPBC pre-dissolved in Propylene Glycol for ease of use. This combination exhibits a synergistic preservative effect, which reduces the total active preservative level necessary; provides for complete, broad spectrum preservation against Gram-positive and Gram-negative bacteria, yeast, and mold.
Compatible with most cosmetic raw materials.
Can be used in a wide variety of leave-on and rinse-off personal care formulations for reliable preservation.
Recommended use levels in a finished formulation is 0.1-0.5%.
Add at 50�°C or below during the cool down stage of processing.
Every cosmetic formulation requires a specific preservative system to meet its individual needs. Therefore, every newly developed or modified product should be challenge tested to assure preservative efficacy.
Used for In vitro diagnostic (IVD) products such as diluent, wash, buffers, and detergents. Broad-spectrum bacteriostatic agents, can effectively inhibit most bacteria and fungi.
Part No. GB01025
CAS NO: 78491-02-8
EINECS NO 278-928-2
Ingredients Diazolidinyl Urea
Assay 98.0%
Molecular Formula C8H14N4O7
Molecular Weight : 278.23
Applicable PH range 3~9
Brand: Neocide
Packaging Pkg of 1kg/10kg/20kg
Storage Room temperature
Shelf life 2 years
Product nameDiazolidinyl Urea Formaldehyde /Germall-2 Powder Antiseptic /1-[1,3-bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea
CAS NO 78491-02-8
Formula C4H10N4O
Storage Dry And Dark Place
EINECS278-928-2
Minimum Order Quantity500g
Packaging DetailsPlastic Bottle or Aluminium Film
Medical Grade
Used for blood collection tube and Cosmetics manufactureing
Diazolidinyl urea
preservative Diazolidinyl Urea SPECIFICATIONS:
Appearance
White, fine, free-flowing powder
Odor Odorless or slight characteristic odor
Nitrogen
19.0~21.0%
Loss on Drying 3.0% max.
Residue on Ignition 3.0% max.
pH (1% in water) 6.0~8.0
Heavy metal (Pb) 10ppm max.
PACKAGING
Standard packaging includes the following:
25kgs net weight cardboard drum inside plastic bag sealed
Other package sizes are available upon request.
STORAGE
Store in a well-ventilated, cool, dry area, out of direct sunlight. Keep containers tightly closedwhen not in use
Tag blood clotting powder, emergency blood clotting agent
Finding the best beauty sales on your favorite makeup brushes, foundations, face moisturizers, and more is easier than ever if you pay attention to the upcoming markdowns. Whether youâ??re a skin-care or makeup enthusiast (or better yet, both) you know that replenishing your stock and trying out new beauty products isnâ??t exactly budget-friendly. And with so many beauty brands nowadays, it can be a little intimidating (not to mention overwhelming) if youâ??re a beauty novice and donâ??t know where to startâ??even seasoned pros miss a good discount every once in a while. This week, weâ??ve taken it upon ourselves to list the must-know sales that include popular best-selling products from brands such as Benefit, La Mer, Foreo, and more.
Now that itâ??s spring itâ??s the perfect time to try out that bold red lip from Yves Saint Laurent youâ??ve had your eye on. And with discounts from Ulta, Sephora, Amazon, and more itâ??s also your chance to stock up on holy grail skin-care products you wouldnâ??t want to spend a day without. Itâ??s never a bad idea to have a backup of your favorite beauty product. Below, weâ??ve shared the top beauty sales you should be shopping this week, and youâ??ll want to hit checkout on these products ASAP before they all sell out.
Ulta
As one of the major beauty retailers, Ultaâ??s 21 Days of Beauty event is particularly exciting with 50% off sales including must-have skin-care and makeup. Until April 2, youâ??ll find daily deals that you wonâ??t want to miss. On the site, you can also see a sneak peek of the beauty items that will be discounted in the following days; plan ahead and save big.
Product Description
Product Name
POPFEEL Beginner Makeup Set Full Of Cosmetic Kit Makeup Gift Sets Cosmetics
Item NO.
KIT03
Delivery Time
a) 15days if have empty tube for ODM b) 40-45days for OEM
Weight
1mlX30pieces, packed with box
Packaging and delivery
Packaging Details Package Size:8.6cm*2.5cm*2.5cm
Product Size: 8.2cm*2.1cm*2.1cm
Gross weight:0.035kg
Selling Units: Single item
Single package size: 8.6X2.5X2.5 cm
Single gross weight: 35.000 kg
Package Type: Package Size:8.6cm*2.5cm*2.5cm Product Size: 8.2cm*2.1cm*2.1cm Gross weight:0.035kg
Sebacic acid has a wide range of uses, mainly used to prepare sebacic acid esters, such as dibutyl sebacate, dioctyl sebacate and Diisooctyl sebacate. These esters can be used as plasticizers for plastics, cold resistant rubber, polyamide, polyurethane, alkyd resin, synthetic lubricating oil, lubricating oil additives, spices, coatings, cosmetics, etc. It can also be used as raw material for the production of nylon 1010, nylon 910, nylon 810, nylon 610 and nylon 9, and as raw material for high temperature resistant lubricating oil diethylhexyl ester. It is also the raw material for the production of plasticizer, softener and solvent for alkyd resin (used as surface coating, plasticized nitrocellulose coating and urea resin varnish) and polyurethane rubber, cellulose resin, vinyl resin and synthetic rubber.
Hot selling Sebacic acid Decanedioic Acid with new batch CAS 111-20-6
GERMALL PLUS is a combination of Diazolidinyl Urea and IPBC pre-dissolved in Propylene Glycol for ease of use. This combination exhibits a synergistic preservative effect, which reduces the total active preservative level necessary; provides for complete, broad spectrum preservation against Gram-positive and Gram-negative bacteria, yeast, and mold.
Compatible with most cosmetic raw materials.
Can be used in a wide variety of leave-on and rinse-off personal care formulations for reliable preservation.
Recommended use levels in a finished formulation is 0.1-0.5%.
Add at 50C or below during the cool down stage of processing.
Every cosmetic formulation requires a specific preservative system to meet its individual needs. Therefore, every newly developed or modified product should be challenge tested to assure preservative efficacy.
UREA 46% PRILLED & GRANULAR
Maximum Quantity: 50,000 Metric Tons per Month
CIF Price: Gross USD $326.00 / NET USD $320.00 on CIF
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Urea n46 percent
Big offer to sell urea n46% origin russia/ukraine/cis, we allocation big quantity goods in hand, this offer is on a first come first serve basis.Pls contact us
Urea 46%
Please consider our offer. And in case of interest send us the answer.
Formal corporate offer
We wish to confirm with full corporate responsibility, that we are ready, willing and able to transact and sell the commodity of urea 46% prilled, with the following specifications, terms & conditions. Nitrogen 46% min.
Moisture 0.5% max
Biuret 1.0% max
Free ammonia 0.005% max or 160 pxt, max
Prill 95% max
Melting point 132 degree centigrade
Color pure white prilled
Radiation non radioactive
Granulation 1-4 mm 90% min
Free flowing 100% treated against caking
Non-clotted - free from harmful substances.
Physical: free from harmful substance, impurities & dust
- quality: Standard export quality
- nitrogen:46% by weight minimum
- moisture:0.5% max fisher/0.3% max dryer
- biuret:1% max by weight
- anti-caking agent:0.5% max
- free ammonia:160 pkt, ppm max
- prill 95% max
- granulation:1-4 mm 90% min
- dimension less than 1 mm: Absence
- melting point:132 degrees celsius
- color: Pure white prilled
- radiation: Certified non-radioactive
- free from: Harmful substances
- free flowing:100%
Loading port: Main port of russia & ukraine
Packing: In bags of 50 kg
Shipment:30 days after receipt of the buyer's l/c
Payment: By irrevocable, transferable, confirmed and revolving document letter of credit, issued
By a prime world bank,100% at sight upon presenting acceptable shipping documents.
Performance bond (pb):2%
Inspection: Quality, quantity, weight, & analysis report by sgs at seller's cost at port of loading. Buyer has option to inspect cargo before shipment.
For a quotation we need to get product and specs, total quantity, delivery term and destination port, packing, full payment terms and conditions, draft and offloading capacities
UREA FERTILIZER 46% PRILLED Quantity: min 10,000 â?? 200,000MT X 12 months with R/E Price: CIF ASWP, Gross $240/$220 per MT FOB Rotterdam/Houston / Vladivostok / Nakhodka, Gross $225/Net $205 per MT
UREA 46% GRANULAR Quantity: min 50,000 â?? 300,000MT X 12 months with R/E Price: CIF ASWP, Gross $240/$235 per MT
FOB/ Rotterdam/Houston / Vladivostok / Nakhodka, Gross $230/Net $225 per MT
FOB DIP AND PAY TERM & TRANSACTION PROCEDURES 1.
1. Buyer Review Sellers SCO And Issues ICPO Along With Company Profile.
2. Seller Issues A Commercial Invoice (CI) For The Available Quantity In The Storage Tank To Buyer, Buyer Signs And Returns CI Back To The Seller Within 4 Working Days.
3. Seller Issues To Buyer The Existing Injection Report Done By The Sellerâ??s SGS Inspection Team For The Injection Of The Product Into The Tank Farm, Seller Issue TSR, Dip Test Authorization (DTA) Letter Containing The Storage Tank Location And Its GPS Coordinates And Buyer Countersign The DTA With Seller Tank Farm.
4. Upon Buyerâ??s Satisfactory Verification Of Sellerâ??s Tanks As Authorized By The DTA, Sellerâ??s Tank Farm Issues A 2-Day Tank Storage Receipt (TSR) To The Buyer To Enable Buyer To Take Over Sellerâ??s Tanks.
5. Upon Receiving The Signed DTA And TSR From The Buyer, The Seller Issues The Following POP Documents:
A. Product Passport.
B. Fresh SGS Report (Not Older Than 48 Hours).
C. Export License.
D. Authority To Verify (ATV).
E. Refinery Irrevocable Commitment To Supply.
F. Sales And Purchase Agreement (SPA).
G. Statement Of The Availability Of The Product.
H. Certificate Of Origin.
I. ATSC (Authorization To Sell & Collect).
6. Upon Successful Dip Test At Sellerâ??s Expense, Buyer Makes 100% Payment For The First Trial Via MT103/TT Wiring And The Seller Transfers Ownership Of The Product To The Buyer.
7. Seller Pays All Intermediaries And Subsequent Monthly Delivery Continues.
1. Basic Information
Product Name Imidazolidinyl Urea
CAS: 39236-46-9
EINECS: 254-372-6
Molecular Formula: C11H16N8O8
Molecular Weight: 388.30
Synonyms: Germall-115
2. Quality Specification:
TEST ITEM SPECIFICATION
Appearance White, fine, free-flowing powder
Odor less or slight characteristic odor
Nitrogen 26.0-28.0%
Loss on Drying 3.0% max
Residue on Ignition 3.0% max
PH 6.0-7.5
As 0.001% max
Pb 0.004% max
3. Packing
Standard packaging includes the following:
25kg per drum, 25kg/carton
Other package sizes are available upon request.
4. Storage
Store in a well-ventilated, cool, dry area, out of direct sunlight. Keep containers tightly closed when not in use.
5. Period of validity
24 months
6. Application
It is effective against Gram-negative bacteria, including Pseudomonas aeruginosa. It provides a complete antimicrobial preservative system that is active against bacteria, yeast and mold.
Imidazolidinyl Urea, is permanently listed by the EU at levels up to 0.6% without restrictions. It is one of the most widely used cosmetic preservatives in the world.
It is safe and effective for both leave-on and rinse-off products. The recommended use level is 0.2-0.4%.
