Fungicide Mancozeb for sale 80% WP, mancozeb fungicide for roses, mancozeb fungicide trade names, mancozeb fungicide uses for crops, fruit, nuts, vegetables, ornamentals, etc. what is mancozeb structure C8H12MnN4S8Zn. we have mancozeb fungicide manufacturers partner. competitive mancozeb price and best service for you.
Sun Pesticides Pvt Ltd Product Mancozeb 75% WP. (SUN M 45). Based on Mancozeb Tech, it is a Co-ordination product of Zinc & Magnaneses ethylene bisdithiocarbamate and contact fungicide. containing 75% w/w active ingredient and balance adjuvants.
Product Name:- Mancozeb 75% WP
Model Name:-SUN M 45
Product Category:- (Contact, Fungicide)
Crops:- Grapes, Guava, Potato, Banana, Wheat, Cumin, Blight, Tomato, Leaf spot
Direction of Use : Ground nut: to treat the seed, first make slurry with required quantity of test fungicide with 10 ml of water per 1 kg of seed and swirl it in a closed container to make uniform coating on the seeds. Then shade dry and sown.
Precaution:-
Precautions:
1) keep away from foodstuffs, empty foodstuff containers and animals feed.
2) Avoid contact with mouth, eyes and skin.
3) Avoid inhalation of the spary mist. spray in the direction of wind.
4) Wash throughly the contaminated clothes and parts of the body after spraying.
5) Do not smoke, drink eat and chew anything while spraying.
6) Wear full protective clothing while mixing and spraying.
Packing Size :- 100mg, 250mg, 500mg, 1kg, 5kg, 10kg
Common name: Metalaxyl
Chemical name: Methyl N-(2,6-dimethylphenyl)-N-(methoxyacetyl)-DL-alaninate
Molecular formula: C15H21NO4
Molecular weight: 279.3.
Physical chemistry: Form similar white crystals.M.p Tech 63.5-72.3,S.g./density 1.20(20). V.p0.75mPa(25),Solubility In water 8.4g/l(22).In ethanol 400,acetone 450,toluene 340,n-hexane 11,n-octanol 68(all in g/l,25).Stability stable up to 300. Stable in neutral and acidic media at room temperature;on hydrolysis DT50(calc.)(20) >200d(Ph1),115d(Ph9),12d(Ph10).
Use:To control diseases caused by air-and soil borne Peronosporales on a wide range of temperate,subtropical and tropical crops.Foliar sprays with mixtures of metalaxyl and protectant fungigides are recommended to control air-borne diseases caused by Pseudoperonospora humuli on hops,phytophthora infestats on potatoes and tomatoes, peronospora tabacina on tobacco,Plasmopara viticola on vines,Bremia lactucae on lettuce and downy mildews on various vegetable,at 200-300g/ha.Soil applications of metalaxyl alone are used to control soil-borne pathogens causing root and lower stem rots on avocado and citrus,at 500-1500g/ha,Seed treatments control systemic Peronosporaceae on, maize peas,sorghum and sunflowers,as well as damping-off(Pythium spp.)of various crops.
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
CS Wrought Fitting Buttweld 90 Deg Elbow Long Radius
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
CS/As Wrought Fitting Buttweld 90 Deg Elbow Short Radius
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
CS Wrought Fitting Buttweld Cross Tee
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.
ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.
