Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters
Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters.
The modem is capable of continuously counting the pulse signals of up to 4 meter systems.
The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP.
The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set.
When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines.
In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP.
The modem can initiate queries through its RS485 interface towards several concentrators input lines.
Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs.
Communication
Supporting GSM/GPRS (Gemalto�® industrial module)
4 inputs (digital or pulse/voltage)
2 relay outputs (optional)
Software/Configuration
Modbus protocol communication
Modbus Gateway
Consumption meter compatibility (receiving and counting pulse signals)
Configuration software (on RS232 or RS485 port)
Extras
Memory for storage of applications, data (with ftp possibility)
External IO-expansion (optional for receiving 32 inputs per module)
Firmware upgrades (ftp server)
Safety
External battery connection (spare power supply)
Watchdog circuit and system monitoring, log
Automatic mobile network connection recovery
Application
Data collection (digital or pulse signal)
Forwarding data of industrial systems
Smart metering (remote readout)
Measurement and data collecting systems
Remote monitoring of devices
Monitoring of input lines
Remote control (optional)
SIM5218
The SIM5218 series is Tri-Band/Single-Band HSPA/ WCDMA and Quad-Band GSM/GPRS/EDGE
module solution which supports up to 7.2Mbps downlink speed and 5.76Mbps uplink speed services.
It has strong extension capability with rich interfaces including UART, USB2.0 high speed,
Embedded SIM Card, SD Card, Camera sensor, GPS, etc.
With abundant application capability like embedded LUA script,TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, it will add much value to customers'' application. It is ideal for a wide arrange
of products including USB Modems, gateways, router, PDA, Video phone, and much more.
General features
• SIM5218A: Tri-Band UMTS/HSPA850/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218E :Tri-Band UMTS/HSPA 900/1900/2100MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218J: Tri-Band UMTS/HSPA800/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
• Video call with Camera sensor interface
• WCDMA Diversity
• HSDPA 7.2Mbps
• HSUPA: 5.76Mbps
• GPRS multi-slot class 12
• EDGE multi-slot Class 12
Main features:
Dual-band GSM external modem
EGSM900/1800Mhz or EGSM900/1900MHz
Small size and aluminum shell shock
Install and us, connect Internet instantly
Has been through all the technical standards certification
Voice, messaging, fax and data transmission of GSM Phase2 +
Designed for a specific application of the AT command control system
3g module SL808xT descriptions:
1.The Sierra Wireless SL808x (SL8080/81/82/83/84/85) is a 74-pin soldered-down module based on the Intel pin-out specification proposal for the standard JEDEC LGA packaging form factor. Its wireless UMTSbased modem provides data connectivity for eBooks, portable navigation devices, mobile Internet devices, point-of-sale devices, industrial handhelds, and other machine-to-machine.
unlock HSDPA usb modem pool 3G bulk sms device SL8080T modem pool with IMEI change
2.Support:The SL808x modem supports data operation on HSDPA, WCDMA,EDGE, and GPRS network
The SL8080/82/84 modems also support voice operation on these networks.
3.The SL808x modems are based on Qualcomm baseband processors:
Voice modems: SL8080/82/84?QSC6270
Data modems: SL8081/83/85?MDM6270
SIM5218
The SIM5218 series is Tri-Band/Single-Band HSPA/ WCDMA and Quad-Band GSM/GPRS/EDGE
module solution which supports up to 7.2Mbps downlink speed and 5.76Mbps uplink speed services.
It has strong extension capability with rich interfaces including UART, USB2.0 high speed,
Embedded SIM Card, SD Card, Camera sensor, GPS, etc.
With abundant application capability like embedded LUA script,TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, it will add much value to customers'' application. It is ideal for a wide arrange
of products including USB Modems, gateways, router, PDA, Video phone, and much more.
General features
• SIM5218A: Tri-Band UMTS/HSPA850/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218E :Tri-Band UMTS/HSPA 900/1900/2100MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218J: Tri-Band UMTS/HSPA800/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
• Video call with Camera sensor interface
• WCDMA Diversity
• HSDPA 7.2Mbps
• HSUPA: 5.76Mbps
Data concentrator with 32 digital inputs and Modbus RTU communication
Cost-effective industrial solution for reading out the data of consumption metering devices (e.g. water, gas, electricity meters) equipped with contact or pulse output line.
Furthermore, the concentrator can connect to any kind of measurement devices, PLCs, controlling machines, data collection system, automata or a network analyzer.
The device is capable of collecting and storing data of up to 32 endpoint devices through the input lines.
The M2M Modem Plus IO® device is connected through the RS485 port to read out the input values with Modbus RTU protocol.
Connection
32x digital inputs (4 segment x 8 isolable inputs, operation mode selection by jumper)
Receiving and counting the contact/pulse signals
Dry/wet contact relay
Open collector input
Receiving the output signals as input signals (alternate wiring)
Receiving reed/hall sensor outputs
RS485 output (ModBus RTU protocol towards the modem)
Software/Configuration
Modbus protocol communication
Readout of Modbus counters, registers
PLC compatibility
Configuration software (locally on serial port)
Security
Watchdog circuit and system monitoring
Data storage into non-volatile memory
Application
Data collection and counting
Measurement and data collection systems
Forwarding industrial system or PLC data
Monitoring industrial or measurement devices
Remote control
119 M2M Modem Plus Rs485 Io A Suppliers
Short on time? Let M2M Modem Plus Rs485 Io A sellers contact you.
1. Main
The H685 series Cellular Router designed for establish a 2G/3G/4G cellular and Wi-Fi wireless network and share a cellular broad band Internet connection. The H685 series Cellular Router enables users to quickly create a secure Wi-Fi (802.11 b/g/n) network and provide access to the Internet using a cellular network. By connect to cellular mobile network; an Internet connection can be accessed and shared virtually anywhere within a wireless broadband network.
2. Hot Spot
Built-in 2G/3G/4G industrial cellular module and sim card slot, insert SIM/UIM card to work directly.
Auto-dial feature, keep alive link
Built-in watch dog
1 WAN RJ45 port + 1 LAN RJ45 port (WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
VPN (PPTP, L2TP, IPSec, GRE, Tunnel), SNMP
standard SMA antenna can be replaced with high gain type
Terminal port for DTU feature (Serial to Cellular Gateway feature,RS232 or RS485 option)
WiFi 802.11b/g/n 150Mbps (optional), can choose 300Mbps.
RJ45 WAN (xDS L) and Cellular backup each other (Route Fail Over Feature)
Two H685 can backup each other if one H685 line failed. (to be Dual sim dual module feature)
Always online, Reboot if the connection is failed.
WiFi can be used as WiFi client
Cellular, WAN RJ45 and WiFi Client can failover backup each other redundancy.
SMS/Voice call to control router to be online and offline (optional)
GPS (optional)
VRRP
RIP OSPF BGP (optional)
I/O port *2 (optional)
POE support (optional)
3. Wireless M2M Application
Remote Data Monitor and Control
CCTV, security surveillance
Water, gas and oil flow metering and schedule
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals, ATM,
Traffic signals monitor and control, Traffic info guidance
Oil field, weather forecast, environmental protection, street lamp monitoring and control
Early Warning of Mountain Torrent
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Telemetry, SCADA
Vehicle logistics and diagnostics controlling
Parking meter and Taxi Monitor
Telecom equipment supervision (Mobile base station, microwave or optical relay station)
OS
Windows, Linux, Mac OS, IOS, Symbian, Android, other OS support web browser;
Physical
Operating Temperature:
Work temperature: -30°C to 70°C option for -30°C to 80°C
Storage temperature: -40°C to 85°C
Humidity: 95% Maximum (Non-condensing)
Dimensions:
PCBA: 96mm x 56mm x 14mm
With case: 100mm x 60mm x 21mm
Weight:
220g (not including the antenna)
330g (including the antenna)
650g (including all accessories, without package)
W3100G IP Modem is a kind of wireless terminal device that provide data transfer function by public GPRS network. It has been widely used on M2M fields.
Features:
1. Rich Data Options
-TCP for reliable data transfer
-UDP for fast and bulk data transfer
-App protocol for secure data transfer
-Methods of serial data packetization
2. Robust Operation
-Constant self test
-Self reset and recovery
-Data buffering
3. Easy Control
-Remote configuration by SMS or GPRS
-Remote activation by SMS, call or Serial command
-Auto SMS of IP for dynamic IP SIM card
4. Always ON Connection
-Auto socket re-connection if drop
-Time to live timer for network checking
5. Flexible Operation
-Server or client mode for connection
-Static or dynamic IP
-Can work as a standard GSM/GPRS modem
-Can work as virtual wire
-Support RS232 / 485 / 422 hardware options
-Local / Remote firmware update via GPRS
-Direct control by HyperTerminal commands
-Provide Center Manager software
Design for Industrial Application:
1.High performance industrial cellular module;
2.Independent protocol stack;
3.Low power consumption, provide sleep mode, scheduled on line/off line mode;
4.Metal shell, provide IP30 protection;
Specifications:
- Frequency Band: GSM Quad-Band 900/1800MHz
- Power Save Mode
- Software: Center Manager
- Supply voltage: 5-36V DC
- Temperature (Restricted Operation): -20Cto+70C.
1. Main
The H685 series Cellular Router designed for establish a 2G/3G/4G cellular and Wi-Fi wireless network and share a cellular broad band Internet connection. The H685 series Cellular Router enables users to quickly create a secure Wi-Fi (802.11 b/g/n) network and provide access to the Internet using a cellular network. By connect to cellular mobile network; an Internet connection can be accessed and shared virtually anywhere within a wireless broadband network.
E-Lins¡¯ mobile data products are widely used in more than 50 countries and regions, and more than twenty industrial fields, such as power control, water schedule, traffic, oil field, weather forecast, environmental protection, street lamp control, post, bank and many other areas..
2. Hot Spot
Built-in 2G/3G/4G industrial cellular module and sim card slot, insert SIM/UIM card to work directly.
Auto-dial feature, keep alive link
Built-in watch dog
1 WAN RJ45 port + 1 LAN RJ45 port (WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
VPN (PPTP, L2TP, IPSec, GRE, Tunnel), SNMP
standard SMA antenna can be replaced with high gain type
Terminal port for DTU feature (Serial to Cellular Gateway feature,RS232 or RS485 option)
WiFi 802.11b/g/n 150Mbps (optional), can choose 300Mbps.
RJ45 WAN (xDSL) and Cellular backup each other (Route Fail Over Feature)
Two H685 can backup each other if one H685 line failed. (to be Dual sim dual module feature)
Always online, Reboot if the connection is failed.
WiFi can be used as WiFi client
Cellular, WAN RJ45 and WiFi Client can failover backup each other redundancy.
SMS/Voice call to control router to be online and offline (optional)
GPS (optional)
VRRP
RIP OSPF BGP (optional)
I/O port *2 (optional)
POE support (optional)
3. Wireless M2M Application
Remote Data Monitor and Control
CCTV, security surveillance
Water, gas and oil flow metering and schedule
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals, ATM,
Traffic signals monitor and control, Traffic info guidance
Oil field, weather forecast, environmental protection, street lamp monitoring and control
Early Warning of Mountain Torrent
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Telemetry, SCADA
Vehicle logistics and diagnostics controlling
Parking meter and Taxi Monitor
Telecom equipment supervision (Mobile base station, microwave or optical relay station)
Wireless Radio Band:
3G UMTS/HSPA/HSUPA/HSPA/HSPA+ (WCDMA/FDD) 2100Mhz or 850/1900/2100MHz or 850/900/1900/2100Mhz;
2G GSM 900/1800Mhz dual band or 850/900/1800/1900Mhz quad-band;
CDMA1x/EVDO: 800/1900Mhz or 450Mhz option;
3G TD-SCDMA 2010~2025MHz/1880~1920MHz;
4G FDD LTE:
Band 17--700(B17)/AWS
Band 13--700(B13)MHz
Band 20--DD800Mhz
Band 8--900Mhz
Band 12¡ª700Mhz
Band 3--1800Mhz
Band 1--2100Mhz
Band 7--2600MHz
4G TDD LTE:
Band 40 -- 2300Mhz
Band 39 -- 1900Mhz
Band 38 --2600Mhz
Main:
SMS/Voice (optional): SMS/Voice call to control router to be online, offline and reboot;
GPS (Optional): Yes;
DTU (Optional):
With DTU feature (Serial to Cellular Gateway feature, RS232 or RS485 port option).
Details:
Serial Baudrate: 300bps, 600bps, 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps;
Serial Parity: none, even, odd;
Serial Databits: 7, 8;
Serial stopbits: 1, 2;
Serial flow control: none, hardware, software;
Mode: Server (up to 4 server centre, can OEM to be more), Client;
Protocol: TCP, UDP ;
Heart Beat : Yes;
VPN: PPTP, L2TP, IPSec, GRE, Tunnel
VRRP: Optional
BGP, OSPF: Optional
SNMP: Support V1, V2. V3
VLAN: Support multi-LAN IP address, support two IP address
Wi-Fi: Optional, 802.11b/g/n; 150Mbps default. 300Mbps optional.
Frequency from 2.4GHz to 2.483GHz,Access Points, Routers and Gateway Server Applications, wireless up to 254 PC users
Fail Over Redundancy (network Backup feature):
Auto-dial feature, keep alive link;
Built-in watch dog;
Cellular (2G/3G/4G), RJ45 WAN (xDSL, DHCP, Fixed IP), WiFi client three line redundancy;
Two H685 dual sim same network(Network1+ Network1);
Two H685 dual sim two network (Network2+ Network 2);
Two H685 dual sim dual mode network (WCDMA+CDMA2000, WCDMA+LTE, CDMA2000+LTE);
LAN/WAN
1X 10/100M LAN port (RJ45 interface)
1X 10/100M WAN port (RJ45 interface)
(WAN RJ45 can convert into LAN RJ45 to get 2 LAN RJ45)
Antenna
2 antenna for Wi-Fi (detachable, SMA interface * 1, Internal *1)
3 antenna for Cellular and GPS (detachable, 50¦¸ SMA female interface), Cellular support diversity receiving (MIMO) option
Led
SYS*1, VPN*1, Signal*1, Cell*1, WAN*1, LAN*1, WiFi*1
Button: Reset
Console: 1 console port
Serial port: RS232 or RS485 built-in terminal block interface
IO Port: 2
Configuration Interface: Web/Telnet/CLI, support remote management
At command: support
UIM/SIM Card Slot: Support 1.8V/3V UIM/SIM
DC Jack:
Two types of input jack for DC
2.5mm DC jack * 1
Terminal Block * 1
Power supply:
DC5V-50V, typical DC 9V1A or 12V1A, 12v CAR USE; DC5V~40V is the default, DC5V~50V is the option;
Power consumption
Idle: 22mA@12VDC
Max: 208mA@12VDC
Average:125mA@12VDC
OS
Windows 8, 7, Vista, XP, 2000
Mac OS
Linux
Other OS support internet browser
Physical
Operating Temperature:
Work temperature: -30¡ãC to 70¡ãC option for -30¡ãC to 80¡ãC
Storage temperature: -40¡ãC to 85¡ãC
Humidity: 95% Maximum (Non-condensing)
Wireless cellular frequency: GSM 900 and 1,800MHz
Supports TCP, UDP, SMTP, POP, ICMP, FTP, PPP, DHCP and DNS protocols
Band rate: 1,200 to 115,200bps
Antenna: 50Ω SMA female interface
Serial port: (RS232, RS485) USB2.0
Power supply: 5 to 25V DC
Typical: 9V DC/1A
Power consumption:
Peek: <1.5mA at 9V DC
Speech: 150mA at 9V DC
Sleep: 30mA at 9V DC
Temperature:
Working: -20 to +60°C
Storage: -40 to +85°C
Humidity: 95% maximum (non-condensing)
Antistatic test: class 3
Radio electromagnetism test: class 3
Warranty: 1 year
Includes:
M12 series modem
Serial cable
Power adapter
Antenna
CD-ROM with product documentation
Packing: 260 x 190 x 65mm
Dimensions: 75 x 50 x 16mm
Weight: 200g
The M120T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports 1~300KHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 4 digital outputs, supports 1~300Khz high speed pulse output or relay outputs, 2 channel 12bits analog outputs, supports 0~10VDC signal output.
The M120T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems.
he M120T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.
Features:
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;
3. Embedded Web server for configuration and management;
Based on Wavecom Q24 plus Wireless Modules.
- Build in 64 GPRS modem in one box
- Sigle power supply for 64 modems
- Power button to control on and off
- USB interface
- Dual Band: 900/1800MHz
Tri Band: 850/1800/1900MHz, or 900/1800/1900Mhz
Quad Band EGPRS 850/900/1800/1900 Mhz
- Send MMS
- GPRS class 10:max 85.6kbps(downlink)
- Auto answer function for voice and data collection with the remote device.
- AT command to control and program
- Designed for WAP, MMS, SMS, CSD data, fax, and voice applications
- Support XP/NT/2000/2003/vista operation systems
- Design for high traffic communicaton
Specifications
1. USB WIRELESS GSM/GPRS MODEN
2. Based on Wavecom and Cinterion Wireless Modules.
3. TCP/IP,OPEN AT.
4. Send and receive data, fax, e-mail, SMS
5. Sending 38,400 SMS per hour
6. USB 2.0 driver
7. 32 SIM card slots
8. Wireless access to internet
9. Comply with GSM Phase 8+ standard
10. Send and receive SMS, MMS, e-mail and data
11. Maximum transmitting speed 115KBps
12. Double tone multi-frequency function(DTMF)
13. Send maximum 38400 SMS per hour
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
OPC UA I/O Controller
OPC UA I/O Controller BL205 was designed for IIOT applications, adopts embedded Linux system, supports customerized development applications, built-in logic programmable function module, is compatible with OPC UA Protocol.
OPC UA I/O Controller BL205 supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc.,
OPC UA I/O Controller BL205 integrates data acquisition, automatic control, Logic program, customerized application, and edge computing, suitable for creating a high-speed, stable and reliable industrial IoT automation control system.
