M-4673 mini digital leakage current clamp meter features high reliability, safety, precision and compact design with 1mA resolution. AC/DC Current range of 100A; particular VFC start mode. Entering this mode can accurately measure voltage and current which has VFC frequency conversion. Voltage or current response display is T-RMS. Whole range overload protection, reliable measurement accuracy and unique design makes it an outstanding new generation electrician/electric power measurement instrument.
Technical Specifications
Np Power 3.5 kW Off-Grid Smart Inverter
Nominal Output Power 3500 Watt
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 100A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 4000 Watt
Max. PV Input 500V DC
Working Temperature -10-55 Degrees
Dimensions 330*278*98 4.4 KG
2 Year Warranty
Apex APX 5KMH Smart Inverter 48V 100A MPPT 500V DC
Nominal Output Power 5000 Watt
Villa
Output Waveform
Pure Sine Wave
Detached House
Output Voltage
230V
Container
Output Frequency
50Hz-60Hz
Tiny House
Efficiency
98%
Bungalow
Max. PV Charge Current
100A
Office and Businesses
Max. AC Charge Current
60A
Commercial Enterprises
Max. Charge Current
100A
Milk Milking Units
DC Input Voltage
12V DC
Beekeepers
Rated Power
5000 Watt
Maximum PV Input
5500W / 500V DC
Operating Temperature
-10 - 50 Degrees
Parallel Connection Support
Available, up to 7-9 devices
Warranty
2 Years
Apex APX 5KW Smart Inverter 48 Volt Mppt
This device operates with 48V DC power, efficiently transferring energy from solar panels to your batteries and automatically stopping the charge when your batteries are full.
Having three features in one provides advantages such as cost savings and reduced space requirements.
It can be truly called a smart inverter with its MPPT solar charge controller feature, inverter function, and grid charging capability.
Thanks to the high voltage input, you can connect a large number of panels.
With the MPPT feature, you use the energy produced by the solar panels in the most efficient way.
In cases where your solar panels and battery are insufficient, you can charge your batteries from the grid or an external generator thanks to the grid charging feature.
Our product stands out with easy installation and can be used comfortably for many years if operated at room temperature, away from dust and moisture, with sufficient ventilation.
It is recommended to install your inverter no more than 1 meter away from the batteries. Longer distances may cause current weakening and related issues
Technical Specifications
Np Power 6.2 kW Off-Grid Smart Inverter
Nominal Output Power 6200 Watt
Output Waveform Pure Sine Wave
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 120A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 6500 Watt
Max. PV Input 500V DC
Working Temperature -15 -60 Degrees
Dimensions 358*295*105 - 8.7 KG
2 Year Warranty
Single Phase
APEX Eco Series 5.5 kW 48V MPPT Off-Grid Smart Inverter Get Your Power From the Sun!
Manage Solar Energy with Smart TechnologyThe Apex Eco 5.5 kW inverter is specifically designed for 48V battery systems, featuring MPPT (Maximum Power Point Tracking) technology, pure sine wave output, high performance, and off-grid operation. This device efficiently utilizes the energy obtained from solar panels to both charge batteries and supply your electrical appliances with 220V AC power.
It is an ideal energy management solution for agricultural lands, country houses, caravans, container buildings, and tiny house projects.
What is the Apex Eco 5.5 kW Inverter?This product acts as the brain of the solar panel + battery + inverter system. Thanks to the high-efficiency MPPT solar charge controller on board, it maximizes the use of solar energy. The 48V system voltage results in lower current, reducing cable losses, thereby enabling a safer and more economical system setup.
What Does the Apex 5.5 kW Inverter Do?
Converts solar energy into electricity
Efficiently charges batteries
Provides power for off-grid living spaces
Has the capacity to run high-power devices
Offers a large LCD screen to view all system parameters
Where Is It Preferred?The Apex 5.5 kW smart inverter is frequently preferred in the following applications:
Solar-powered home systems
Tiny house energy systems
Caravan electrical infrastructure
Agricultural irrigation and equipment electrificatio
Uninterruptible power supplies for security systems
Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart Inverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V - 500V
AC Output 220V -Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase
Maximum Output Power: 6.2 kW output capacity, enough to power all your electrical devices in homes, offices, caravans, cottages, villas, and tiny houses.
Voltage Compatibility: Operates with 48V DC battery systems.
Built-In MPPT Charge Controller: Offers up to 98% charging efficiency, directing solar energy to batteries in the most efficient way.
Smart Display & Menu: Advanced LCD screen allows real-time monitoring of system voltage, charging status, load, and other parameters.
Pure Sine Wave Output: Fully compatible with sensitive electronic devices.
Multiple Protection Systems: Protects against overvoltage, short circuits, overheating, and undervoltage.
AC or Generator Charging Support: Can charge batteries from an external AC source, ensuring uninterrupted power.
Low Standby Power Consumption: Contributes to energy savings.
Durable and Compact Design: Heat and impact-resistant casing ensures long-lasting use.
Commercial businesses requiring backup power (small shops, clinics, workshops, etc.)
Why Choose NP Power?
Backed by 12 years of Electrozirve engineering experience, NP Power inverters offer reliable energy solutions with wide functionality, high efficiency, professional support, and a user-friendly interface.
Apex APX 1KP Smart Inverter 12V 50A PWM
Nominal Output Power 1000 Watt
Villa
Output Waveform
Pure Sine Wave
Detached House
Output Voltage
230V
Container
Output Frequency
50Hz-60Hz
Tiny House
Efficiency
99%
Bungalow
DC Input Voltage
12V DC
Office and Businesses
PWM
50A
Commercial Enterprises
Rated Power
1000 Watt
Milk Milking Units
Maximum PV Input
800 W / 50V DC
Beekeepers
Operating Temperature
0 - 40 Degrees
Noise Level
45dB
Warranty
2 Years
What is the Apex APX 12 Volt Smart Inverter?
The Apex APX 12 Volt Smart Inverter is a power converter used in solar energy systems, caravan, and marine applications that converts 12V DC power into 220V AC with high efficiency and intelligent protection systems. It automatically protects against overload, short circuit, low voltage, and high temperature. It provides safe and uninterrupted energy with silent operation, LED display, automatic fan control, and fast response features.
Advantages of Apex APX 1 kW Pure Sine Smart Inverter
The Apex APX 1 kW pure sine smart inverter delivers clean and stable energy for sensitive electronic devices. It is durable and safe with overload, short circuit, high temperature, and low voltage protections. It offers LED display, automatic fan control, and intelligent battery charge support. It operates quietly, has high energy efficiency, and ensures trouble-free use in caravan, marine, and off-grid systems.
Most Common Sectors Using Apex APX 1kW Smart Inverter
The Apex APX 1kW smart inverter is widely used as a reliable energy source in caravan and marine sectors for mobile living. It is preferred in solar energy systems and off-grid applications. It is also commonly used in security systems, communication infrastructures, mobile office solutions, and small-scale agricultural projects.
What Can Apex APX 1kW (1000 Watt) Smart Inverter Power?
Home and Office Electronics:
Laptop
LED TV (32-40 inches)
Modem and router
Printer
Chargers (phone, tablet)
Lighting:
LED bulbs (10-20 units, up to 10W each)
Desk lamps
LED strip lights
Small Household Appliances:
Microwave (up to 700W)
Electric kettle (up to 750W)
Mini refrigerator
Vacuum cleaner (low wattage)
Coffee maker (low wattage models)
Garden and Agricultural Equipment:
Submersible pump (up to 0.5 HP)
Drip irrigation controllers
Small lawn mowers (low wattage)
Mobile and Off-Grid Uses:
All basic electrical devices inside caravans
Marine equipment (fish finder, radar, small electrical devices)
Security cameras and alarm systems
Portable coolers
Others:
Battery chargers
Electric drills and grinders (low wattage)
Music systems
What Cannot Apex APX 12 Volt 1000 Watt Smart Inverter Power?
Due to power limits and high starting currents, the following devices are not suitable to run with this inverter:
High Power Household Appliances:
Omniscient International, an ISO & CE certified manufacturer, offers durable and precisely engineered Electrical Brush Holders for Motors. These holders are designed to maintain consistent brush pressure and alignment, ensuring efficient current transfer and extended brush life. Suitable for both AC and DC motors, our brush holders are available in standard and custom designs using high-quality materials like brass, steel, and aluminum for long-term industrial performance.
Omniscient International, an ISO & CE certified manufacturer, supplies Standard Size Brush Holders designed for reliable performance across a wide range of motors and generators. Manufactured using high-quality brass or stainless steel, with a golden or silver metallic finish, these holders ensure stable brush alignment, uniform pressure, and efficient current transfer. Suitable for AC/DC motors, industrial pumps, generators, and compressors, our standard brush holders are available in commonly used dimensions and mounting types. We also provide quick customization based on client specifications or machine models.
Omniscient International, an ISO & CE certified manufacturer, supplies Standard Size Brush Holders designed for reliable performance across a wide range of motors and generators. Manufactured using high-quality brass or stainless steel, with a golden or silver metallic finish, these holders ensure stable brush alignment, uniform pressure, and efficient current transfer. Suitable for AC/DC motors, industrial pumps, generators, and compressors, our standard brush holders are available in commonly used dimensions and mounting types. We also provide quick customization based on client specifications or machine models.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger.
This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications.
Product advantages:
All-in-one design, high integration and space saving installation
Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years
Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability
Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage
BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range
System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell
Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
IP65 explosion-proof and waterproof Zone 2 inverter is the most advanced DC to AC inverter, built in low frequency isolation transformer, IP65 industrial explosion proof rating enclosure, widely used in coal mines, wineries, chemical plants.
Application:
1. Zone 1& 2 Hazardous locations, such as: underground coal mines, wineries, chemical plants, etc.
2. Environment with IIA, A A IIB, IIC types of explosive gas, such as: Flour mills, Aluminum powder plant, Metal mine factory, Graphite factory.etc.
3. Indoor (IP54) or outdoor(IP65)
4. Low noise/ Silent working mode
5. Explosion proof/ Spark-proof/ Waterproof/ Anti-dust/ Shock-proof.
Features:
1. Durable: 4.0 thick steel plate seamless welding, surface spray, beautiful appearance.
2. Explosion proof rating: Explosion-proof standard is EXdIIBT4.
3. More reliable: Built-in low frequency isolation transformer, strong ability of anti-interference.
4. Widespread application: DC to AC, Single phase to Three phase, High voltage to Low voltage or Low voltage to High voltage.
5. Pure sine wave output, quick instant response speed
6. Excellent performance of taking load, it can take a variety of loads, such as: halide lamps, motors, welding machines, precision machine tools, fluorescent lamps, energy-saving lamps, etc.
7. Powerful protection functions: With over-current, over load, under voltage, over voltage, short circuit, over heating and other protection.
8. High protection class: With good performance of anti-dust, waterproof,shockproof.
9. 100% full power output: Can be 7* 24 hours continuously working
10. Accept customized: Can be customized according to customers' requirements.
11. Adopted the sixth generation IPM intelligent power module from Mitsubishi,high efficiency and stable performance, intelligentized, modular, simple structure design, very easy and low cost for future's maintenance.
12. Advanced functions:
1) Setting flexible: The DC input voltage range, output voltage, output frequency all can be set.
2) Two kinds of work mode: Can add AC bypass input(Optional), Battery priority, AC bypass as back up or AC bypass priority, battery as back up.
3) Two kinds of start mode: Variable frequency start and Step down voltage start. with stronger capacity to drive inductive load.
4) RS485 remote monitoring(Optional)
5) Big LCD color screen display, modular structure very easy for future's maintenance
6) High efficiency > 94% and low loss, design service life > 15 years.
SANDI 30KW DC to AC inverter with 120/240V split-phase off grid inverter with CSA/UL1741
Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply.
Technical Features:
1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more.
2. Intelligentized, modularized, simple structure design with powerful function.
3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8. Low Frequency Transformer, which ensures that inverter has high efficiency.
9. High conversion efficiency, Max. Efficiencyâ?¥94%,if 48VDC input, the efficiency can more than 85%.
10. Adopts black pure aluminum radiator, which confirms the best radiating performance.
11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12. Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
13, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
[Optional]
A, RS485 communication;
B, AC bypass complementary function;
C, Built-in charger
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, TV, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation.
10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
2328 M 4673 100A Current Clamp Meter Trms Ac Dc Suppliers
Short on time? Let M 4673 100A Current Clamp Meter Trms Ac Dc sellers contact you.
