Description:
KSD simplex fiber optic cable comes with a single buffered fiber,aramid yarn strength members and low smoke zero halogen(LSZH)/PVC/TPU outer jacket.
Application :
1. Terminated with various types of connectors
2. As pigtail of communication equipment
3. Suitable for communication equipment served
Note:
1.Cables can be supplied with a range of single mode or multimode fibers.
2. The dimensions and raw materials can be designed according to the demand of the customers.
3. Standard Reel Length: 2000m/reel: other lengths available on request.
Product description of simplex tactical fiber optic cable for broadcast television communication
In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath.
?product features of simplex tactical fiber optic cable for broadcast television communication
1.Excellent mechanical and temperature performance.Critical protection to fibers.
2.Excellent ultraviolet prevention with pe sheath.
3.Excellent crush resistance and flexibility.
4.The following measures are taken to ensure the water blocking performance of the cable:
- single steel wire strength member used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
Feature:
High tensile strength due to aramid strength member;
Good flame retardant properties;
Stable temperature performance;
Excellent stripability with tight buffered fiber;
High uniformity of geometrical characteristics.
Application:
Indoor riser level and plenum level cabling;
Fiber jumper or pigtail;
Indoor riser level and plenum level cabling;
Interconnections between instruments and communication Equipment
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber.
It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric.
ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on.
There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C).
The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP.
ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers.
Low insertion loss.
High return loss.
High reliability and stability.
Excellent exchangeability and durability.
FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available.
PC, UPC or APC polishing.
Single mode and multi-mode available.
Simplex, duplex or fan-out available.
;0.9, ;2.0, ;3.0 available.
Length: 1m, 1.5m, 2mor customized.
PVC, LSZH or hytrel available.
Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
MPVCS-01 this product has good mechanical physical performance and extrusion processing performance, and it is suitable for the sheath material of wire and cable with low temperature of 70.
MPVCS-01 this product has good mechanical physical performance and extrusion processing performance, and it is suitable for the sheath material of wire and cable with low temperature of 70ºC.
Properties Typical Value Test Method
Appearance Black granule Visual
Density /(g/cm3)
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation.
The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.
The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members.
Features & Application
òExcellent optical, mechanical & environmental performance
òHigh strength-to-weight ratio
òCSM dielectric type û Fiber Reinforced Plastic
òDry block construction
òHigh tensile strength
òHigh crush strength
òCorrosion resistance
òKINK resistance
òVery light weight
òVery flexible & small bending radius
òLong haul / backbone application
òJunction communication systems
òAll dielectric applications
òCATV applications.
Construction Parameters
Fiber Count 02 û 144 Fibers
Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Second (Outer) Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.
The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.
The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.
Features & application
Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.
Construction Parameters
Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings.
Features & application
Excellent optical, mechanical & environmental performance
Csm dielectric type û fiber reinforced plastic
High tensile strength
High crush strength
Aerial application
Application in lan, wan, especially in ftth networks
Easy to clamp and install
Can bear ice loads and high wind pressures.
Construction Parameters
Fiber Count 02 to 12 Fiber
Fiber Type G.652.D
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm
Nominal Cable Delivery Length (km) 2 KM + 3% .
Mechanical Characteristics
Tensile Strength (N) 600
Tensile Strength (N) (Installation) 1000
Crush Strength (N) 2,000
Minimum Bending Radius (mm) 75
Temperature Operating Range -10 to +70¦C.
Parameter
Single mode
Multimode
Insertion loss(db)
1 0.25
Exchangeability(db)
1 0.20
Repeatability/500 remates(db)
1 0.30
Sleeve material
Zirconia
Phosphor bronze
Housing material
Plastic
Metalic
Operating temperature
-40¡ãc to +80¡ãc
Storage temperature
-40¡ãc to +80¡ãc
Useú¦telecommunication networks; local area networks; video; multimedia; premise installations
Featureú¦integrated projective caps protect ferrules from dust and rule out any laser light emissions; integrated spring for a guaranteed closing of the protected cap; full ceramic ferrule; special ferrule perform for short polishing time; adjustable in 60 degree steps; excellent for high packing density
Typeú¦e2000 patch cord
Sizeú¦e2000/sm e2000/mm e2000/apc 0.9mm 3.0mm
Application:
*Long Distance Trunk Network, Metropolitan Area Network, Access Network l
*DWDM System
*Fiber CATV Network, Fiber Data Network
*Optical Active Accessories
Features:
*Low insertion loss,
*High return loss
*Good repeatability and exchangeability
Fiber optic cables Abu Dhabi and Dubai. We offer fiber optic solutions and fiber optic cabling solutions. Optical fiber/fiber optics cable dealers and suppliers in Abu Dhabi.
