Low-friction dynamic air cylinder:
The rolling diaphragm creates the perfect seal for friction free cylinders, air proof, non-lubrication and low-friction,
This product is supply the power required in push, promote, fasten, convolution, rotation and linearly motion operating conditions.
The super cylinder composed of linear ball bearing and heat-treatmented piston rod.This precision elements can be used in conditions with very strictly sensitivity requirements because its high low-friction feature.
Features:
Excellent leak tightness, gastight,
High-low friction, stationary motion, shockproofness;
Hypersensitized even under very little pressure change;
Low starting pressure and separating force;
Non-lubrication
High temperature resistance, high tensile, light weight, erotion control and low cost.
Maintenance free, longevity of service, multiple type of products.
Applied range:
Use in constant tension output high precision equipments.
Valve actuator, shock-mitigating device, aerodynamic retarder etc.
Tension control system, dancer roll and heat-removal control system.
Automation control, drag roll high sensitivity drive control.
Factory's equipment with gastight and non-greasy dirt requirements.
Body and parts: 6061high-strength aluminum alloy;anodized on surface
Piston rod : material:20crmnti , thermal treatment-hard chromium -ground finish -hardness:60-62hrc
Rubber diaphragm : butadiene nitrile rubber with filamentary fibre;service life:2million times
Linear axletree: thk, myt(japan)
Type: lcs59-75-s1-p
Cylinder diameter: 59mm
Working stroke: 75mm
The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of controlair's line of diaphragm air cylinders. These cylinders provide virtually frictionless conversion of pneumatic pressure to linear force. The fact that there is no stiction or blow-by of any kind ensures accuracy, repeatability and sensitivity unheard of from conventional sliding seal air cylinders.
Ip/ep converter
Ip/ep transducer
Electropneumatic transducer
Input electrical current:4-20ma, 0-10v
Output pressure:20-100kpa
Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal.
Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h).
Features:
Flow rate: 7.6m3/h when supply pressure is 175kpa
20.0m3/h when supply pressure is 700kpa
Min/max. Supply pressure:
Minimum-3psig(21kpa) above maximum output
Maximum-100psig(700kpa)
Sensitivity: <+-0.15% of span per 10 psig
Linearity:<+-0.75% of span
Repeaability: <0.5% of span
Hysteresis: <0.1% of span
Flow rate: 4.5 scfm(7.6m3/hr anr) at 100 psig(175 kpa) supply
12.0 scfm(20.0m3/hr anr) at 100 psig(700 kpa) supply
Maximum air consumption: 0.05scfm(0.07m3/hr ) midrange typical
Port size:
1/4 npt(pneumatic)
1/2 npt(electric)
Weight: 2.1lb.(0.94kg)
Input current:4-20ma
Output pressure:20-800kpa
T10 is a very higy precision pressure regulator, pressure stability is achieved by a high performance servo-operated control mechanism utilized in the regulator and the pressure supplied to the pneumatic servo amplifier is reduced and held constant.
A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
Feature:
Accurate pressure regulation: control output pressure to within 0.5% accuracy, regulated pressure variation as small as 0.06kpa is self corrected.
Satable output: substantial changes in flow have virtually no effect on regulated pressure within 12 scfm.
Dependable startup: retuns the regulated pressure to its original output setting even after long í¦down timeí¦.
Temperature stability: a stainless steel measuring capsule which activates the servo control, no effects on regulated pressure in wide vaviations operating temperature.
Electropneumatic transducer
Input electrical current:4-20ma, 0-10v
Output pressure:20-100kpa
Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal.
Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h).
Features:
Flow rate: 7.6m3/h when supply pressure is 175kpa
20.0m3/h when supply pressure is 700kpa
Min/max. Supply pressure:
Minimum-3psig(21kpa) above maximum output
Maximum-100psig(700kpa)
Sensitivity: <+-0.15% of span per 10 psig
Linearity:<+-0.75% of span
Repeaability: <0.5% of span
Hysteresis: <0.1% of span
Flow rate: 4.5 scfm(7.6m3/hr anr) at 100 psig(175 kpa) supply
12.0 scfm(20.0m3/hr anr) at 100 psig(700 kpa) supply
Maximum air consumption: 0.05scfm(0.07m3/hr ) midrange typical
Port size:
1/4 npt(pneumatic)
1/2 npt(electric)
Weight: 2.1lb.(0.94kg)
Input current:4-20ma
Output pressure:20-800kpa
Plastic bag, inner box, master carton
10162 Low Friction Dynamic Air Cylinder Suppliers
Short on time? Let Low Friction Dynamic Air Cylinder sellers contact you.
8mm sub-micro connectors are made according to din 43650 / iso 4400, en175301-803:2000 forms. The mini and 9.4mm sub-micro connectors are industry standards and are used where rapid installation and service are a must. Both the mini and 9.4mm sub-micro connectors are compatible with din 43650 form. All are used as protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves. Connectors offer distinct advantages over "hardwired" solenoid valves because of their modular design. Better than molded construction when special wire is needed or when using one long wire run.
General technical data
Color: black, gray or translucent for lighted styles
Cross section of the conductor wire max.: 14 awg
Rated voltage max.: 300 vdc / 250 vac 50/60 hz
Environmental protection: nema 4 and ip 65 dust tight and water resistant
Maximum rated temperatures for gaskets:
Nitrile gasket: -25to +90
Silicone gasket: -40to +125
Apple is beauty to share, both to lose weight, but also make the skin smooth and soft. Apple is a low-calorie food, every 10 green apple 0 grams only produce 60 kcal calories; apple nutrient soluble, easy to be absorbed by the body, it is "living water," said, is conducive to dissolving sulfur elements, so that the skin lubrication soft The There are copper, iodine, manganese, zinc, potassium and other elements, the human body such as the lack of these elements, the skin will dry, easy to crack, itchy.
Vitamin C in the apple is the protective element of the cardiovascular, the health element of the heart disease.
Eat more apples than those who do not eat or eat less apples cold risk is lower So, there are scientists and physicians called the apple "all-round health fruit" or called "general practitioner". Air pollution is more serious, eat apples can improve the respiratory system and lung function, protect the lungs from the dust and dust in the air.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Commodity: Calcium chloride
Molecular formula CaCl2
H.S code 28272000
Product feature
Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous.
Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature,
Specifications:
Analysis Item Standard
Calcium chloride (CaCl2) 74%min,77% min,94%min
Total Chlorinated Alkali: (NaCl) 5.0%max
Magnesium Chloride(MgCl2) 0.5%max
Insoluble matter in water 0.25%max
Calcium Sulfate (CaSO4): 0.2%max
Ferric Oxide (Fe2O3) 0.025%max
Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max
Application
Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry.
Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped
Means of transportation :in containers or by bulk vessel with large quantity
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Automatic cylinder turning flour mixing machine for bread /cake /other sanke food process necessary machine ,save labours,sanitary,low price high profit !
Also have semi-automatic flour mixing machine for bread /cake /other sanke food process necessary machine,good price good quality ,some have stock ! welcome order !
Bauxite is a naturally occurring mineral comprising mainly of aluminium hydroxides (the trihydrate Gibbsite Al(OH)3and the AlOOH monohydrate polymorphs boehmite and diaspore), with other components in the mineral typically being silica, iron oxide, titania and aluminosilicates (clay etc). It’s a rock from Laterite soil and it is a primary Ore of Aluminium.
Properties of Bauxite include low iron content; a high Polished Stone Value (PSV) for high friction surfacing applications; a high melting point and density.
APPLICATIONS
Gunning materials
High friction surfacing
Minerals for abrasion
Refractory castables
Mouldable and Ramming Mixes
Refractory mineral blends
CEMENTATION believes in supplying quality bauxite with consistency to its customers across the world, according to their needs.
Fresh corn cleaning production line ,clean vegetable cleaning and air drying assembly production line, prefabricated vegetable processing equipment,different capacity customized .
Machine features :
1.Universal adjustable nozzle, uniform spraying, stable without unhook, 360degree adjustable cleaning.
2.Circulating water tank, filter impurities in the product cleaning process to prevent clogging of the nozzle.
3.Automatic control, simple operation
4. Vortex air pump, strong wind, anti-seismic base, wear resistant.
5.Motor mute energy saving.
Corn bubble cleaner production line also can process :
Leaf vegetables, root vegetables, fruits, Chinese herbs, edible mushroom, aquatic products and seafood .
Good business investing low cost high profit!
Vegetables and fruits contain fiber and various nutrients needed by human body,how to solve the process vegetable fruit with big capacity ?
We recoment our vegetable /fruit production line for different vegetable and fruit :
Advanced Technology Features:
360 degree no dead angle and no damage cleaning, low investment and high return, simple operation, high degree of automation save labor cost, sanitary and easy cleaning, one machine for multiple purposes, convenient and fast. Capacity 1T -2T ,big capacity customized .
The main process flowing :
1. Fruit and vegetable cleaning production line: material lifting -- selection and sorting -- first cleaning -- second cleaning -- draining water -- air drying.
2.Leaf Vegetables processing flow: selection and sorting - material cutting - material lifting - first cleaning - second cleaning - drainage water- air drying.
3.Root vegetables process flow: peeling and cleaning - selection and sorting - material lifting - material cutting - material lifting - first cleaning - second cleaning - draining water - dehydration.
According to clients different needing we offer unit process machine and design production line :
Our vegetable fruit process machine /production line use range : food process factory ,central kitchen,large dining hall,catering chain,Factories, universities, supermarkets and so on .
Oil and slag removal integrated machine, automatic kitchen oil-water separator ,kitchen oil separator . Capacity 3m3/h -50m3/h . Can customized ! Deoil reate 90% .
Use for : Hotels, hospitals, schools, food cities, restaurants,factory ,ship/vessel restaurants
Equipment principle:
The kitchen waste treatment equipment belongs to aerobic bacteria and reduced biochemical waste treatment equipment,
It is characterized by relatively small volume, flexible installation, fast processing speed of kitchen waste, less residue and no secondary pollution.
Technical advantages:
Source control
Source control of kitchen organic waste, local treatment and prevention of secondary pollution
Resource reuse
Reuse of resources. The food waste will be turned into organic fertilizer after treatment. The waste reduction rate and resource utilization rate are high
cost reduction
Integrated design and installation of equipment are convenient and fast, reducing the cost of civil construction
Fully automatic control
Fully automatic control of equipment, simple and convenient operation, saving manpower and material resources
Ecological and environmental protection
The equipment has air treatment capacity and sewage treatment capacity, which will not pollute the surrounding environment of the equipment room and affect people's livelihood
Economical and practical
Low energy consumption, low maintenance cost, economical and practical.
Drying Type Garlic Peeling Machine
Garlic dividing- peeling machine is an advanced and large-scale garlic dividing -peeling equipment, which has obtained the national invention patent. No-water garlic peeling machine
The machine adopts the integrated flow mode of dividing, flaking and air stripping. The raw materials and peeled products of garlic gradually come out, with small gas consumption, high output and no noise. Besides, it is equipped with garlic waste skin extrusion molding device, which is environmentally friendly and pollution-free. The successful development of this new technology has become an important mechanical equipment in the garlic processing industry .
The remarkable features of the machine are as follows
1. Garlic does not need to be cut into roots, and the equipment will automatically peel garlic petals from the root.
2. Automatically split the garlic and peel it.
3. The feeding and conveying, flaking, continuous peeling and finished product output are all automatic.
4. The machine can automatically collect the waste garlic skin and extrude it into pieces, which is convenient for waste skin treatment.
5. The machine is clean and undamaged.
6. The machine also has the characteristics of low power consumption and no noise.
Have full-automatic / semi-automatic garlic peeling machine ,big capacity garlic peeling production line and customized design!
10162 Low Friction Dynamic Air Cylinder Suppliers
Short on time? Let Low Friction Dynamic Air Cylinder sellers contact you.
