Find Verified Liquid Tight Flexible Pvc Coated Conduit Suppliers, Manufacturers and Wholesalers

Features:

Galvanized steel, square-locked core with cord packing from 3/8" to 1-1/4", interlocked core from 1-1/2" to 4" to give additional strengh to prevent unravelling
Smooth wipe clean PVC jacketed
Liquid-tight IP66/IP67
Good flexibility
High mechanical strength
Flame retardent
UV protection
moisture proof
Resistance to most of chemicals, such as oil, acids and vapours, etc.
Good Absorption of motion and vibration
Cover does not winkle when bent
Temperature range from -25oC to +90oC
PVC colour black (standard), grey or orange (made to order)
Nickel plated brass fittings
Galvanized malleable iron fittings
Stainless steel fittings
Applications:

General indutrial installations and wire protection
Outdoor installation
Machine tools
Installations where liquid-tight is a requirement
Special Applications:

According to customer's samples and specifications, we can manufacture the LT type flexible conduit to suit special applications, such as wider temperature range, specific chemical resistance, etc.



Smooth wipe clean PVC jacketed
Liquid-tight IP66/IP67
Good flexibility
High mechanical strength
Flame retardent
UV protection
moisture proof
Resistance to most of chemicals, such as oil, acids and vapours, etc.
Good Absorption of motion and vibration
Cover does not winkle when bent
Temperature range from -25oC to +90oC
PVC colour black (standard), grey or orange (made to order)
Nickel plated brass fittings
Galvanized malleable iron fittings
Stainless steel fittings

Flexible conduit

Liquid Tight Flexible Metal Conduit -PLTG23PVC Series (Non-UL)
PLTG23PVC Series
Liquid Tight Flexible Metal Conduit (Interlocked)
The full range of product is developed by following the conduit size of UL360 standard with excellent tensile and impact resistance for applications where are more critical in environment conditions. Applicable for the protection of circuit with 600 volt or lower in locations where no UL certification is required, including commercial buildings, industrial plant, shipyards, marine or boat, computer rooms and etc..
Liquid Tight Flexible Metal Conduit, Liquid Tight Conduit, China Manufacturer
Material: Galvanized Steel + PVC Jacket
Temperature Range: -20~+80
IP Rating:�
IP 40 (Fit with connector series: XS52)
IP 66 (Fit with connector series: XS50, XS51 & XS53)
Jacket Color: Grey (Standard), other colors are available by consult.
Flexibility: High
Fire Retardant: Self-extinguishing
UV Resistance: Yes
RoHS Compliance: Yes
Flexible Metal Conduit, Non-Metallic Flexible Conduit, Metallic Fittings Supplier.

PVC Coated Flexible Conduit url:http://www.kingsunele.com

Liquid Tight Non-Metallic Flexible Conduit- PLFNCB2 Series
Non-Metallic Flexible Conduit PLFNCB2 Series
Liquid Tight Non-Metallic Flexible Conduit (Extra Flexible LFNC-B)
Extra Flexible Liquid Tight Non-Metallic Conduit (PLFNCB2) is made of thermoplastic polyvinyl chloride (PVC) with smooth inside and wave outside surface. The material is compliant with RoHS requirement and featured to resist UV, age and oil. The extra flexible LFNCB conduit integrates a reinforce member to shape a wave surface that enables higher flexibility and offers the performance of self-support and crush resistance. PVC is a material in good extension. It gives lighter weight and easy to cut which is benefit for quick assembly on site. The best efficiency of water proof for whole wiring system is able to achieve by connecting with the liquid tight fitting series P50 to P53.
Liquid Tight Non-Metallic Flexible Conduit, Manufacturers Wholesale
Material: Thermoplastic Polyvinyl Chloride (PVC)
Temperature Range : -18~+80 Dry, 60 Wet, 70 Oil
IP Rating : IP 66 (Fit with connector series: P50, P53, S50 & S53)
Color : Black
Flexibility : High
Fire Retardant : Self-extinguishing
UV Resistance : Yes
RoHS Compliance : Yes

Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B)
S53 Series
Liquid Tight Conduit Fitting, 90 Degree Elbow
Liquid Tight Metal Conduit Fitting S53 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. S53 series metal fittings are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with male NPT thread system and connected with metal flexible conduit by a nut. This series of connector is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system ended to a junction box or enclosure. The compact structure of this fitting offers feature of moisture and water seal and high tensile resistance to protect the wiring system and benefit to apply to indoor or outdoor environments after assembled with the liquid tight metal flexible conduit series PULTG, PCBLTG, PHLTG and PNKLTG.
Metallic Fittings, Liquid Tight Flexible Metal Conduit Fitting Hot Sale China

PVC Flexible Lumps From Cables Scrap
MATERIAL : PVC flexible lumps from cables
CATEGORY : PVC
TYPE : flexible lumps
GRADE : from cables
SPECIFICATION : 120,000 lbs PVC flexible lumps from cables, ongoing supply .Mixed color, USA origin
ORIGIN : USA
LOADING WEIGHT : 18 Tons
CFR (USD/Ton) : 700-850 India

1. Material: PVC coated + galvanized steel strip
2. Temperature range: -10â??---+80â??
3. Normal size: 3/16"---4"
4. PVC color: black, grey
5. Product features:
(1). Hot-dipped galvanized steel strip with special anticorrosion treatment.
(2). PVC surfaced thickened layer, having super soft and excellent bending performance, straong tensile resistant, not easily broken or deformed.

Special Use: Cold Heading Steel
Wire Gauge: 0.15mm to 16.00mm
Application: Fencing
Alloy Or Not: Non-alloy
Type: Spring
Steel Grade: SAE1010 SAE1045 SAE1060 65Mn 72A 82B
Origin : India and China

Features:

Galvanized steel, square-locked core with cord packing from 3/8" to 1-1/4", interlocked core from 1-1/2" to 4" to give additional strength to prevent unravelling
Smooth wipe clean PVC jacketed
Liquid-tight IP66/IP67
Good flexibility
High mechanical strength
Flame retardant
UV protection
moisture proof
Resistance to most of chemicals, such as oil, acids and vapors, etc.
Good Absorption of motion and vibration
Cover does not winkle when bent
Temperature range from -20oC to +105oC
PVC color black (standard), grey or orange (made to order)
Nickel plated brass fittings
Galvanized malleable iron fittings
Stainless steel fittings
Applications:

General industrial installations and wire protection
Outdoor installation
Machine tools
Installations where liquid-tight is a requirement
Special Applications:

According to customer's samples and specifications, we can manufacture the LT type flexible conduit to suit special applications, such as wider temperature range, specific chemical resistance, etc.

Specifications:

Part No Nominal Size ISO (mm) Nominal Size US (inches) I.D. (mm) O.D. (mm) Min. Bend Radius (mm) Length (M/coil)
LT-10B/G 16 3/8" 12.3 - 12.8 17.5 - 18.0 60 30
LT-11B/G 20 1/2" 15.8 - 16.3 20.8 - 21.3 80 30
LT-12B/G 25 3/4" 20.7 - 21.2 26.2 - 26.7 100 30
LT-13B/G 32 1" 26.2 - 26.8 32.7 - 33.4 150 30
LT-14B/G 40 1-1/4" 34.8 - 35.4 41.4 - 42.2 180 20
LT-15B/G 50 1-1/2" 40.1 - 40.6 47.4 - 48.3 200 20
LT-16B/G 63 2" 51.3 - 51.9 59.4 - 60.3 250 15
LT-17B/G 75 2-1/2" 63.0 - 63.6 72.1 - 73.0 300 10
LT-18B/G 90 3" 78.0 - 78.7 87.9 - 88.9 450 10
LT-19B/G 100 4" 101.6 - 102.6 113.2 - 114.3 600 5

Suitable fittings:
LT type of fittings - IP66/67 (liquid-tight

Ginger root
Botanical name: Zingiber officinale Linn.
Family: Zingiberaceae.
Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant.

Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice.

Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position.
Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed.
Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils.
The composition of dry ginger is given below:
Dry Ginger rootMoisture:6.9 %
Protein:8.6 %
Fat:6.4 %
Fiber:5.9 %
Carbohydrates:66.5 %
Ash:5.7 %
Calcium:0.1 %
Phosphorous:.15 %
Iron:0.011 %
Sodium:0.03 %
Potassium:1.4 %
Vitamin A:175 I.U./100 g
Vitamin B1:0.05 mg/100 g
Vitamin B2:0.13 mg/100 g
Niacin:1.9 mg/100 g
Vitamin C:12.0 mg/100 g
Calorific value:380 calories/100 g.
Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.

Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m

Main Color - black

Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.

Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.

Other waterproof applications on cars and new energy cars

Very Hot Application: sake, soy sauce, vinegar, chemical liquid, ultrasound gel, fertilizer liquid, diluent, detergent, desinfectant, hand sanitizer.

Suggestion A: Cubitainer
Material: LDPE
Advantages: soft plastic, collapsible, light weight, food grade
Size range: 1L~25L.
Price: 40% Higher than B

Suggestion B: Cheertainer
Material: Inner layer: PE ; Outer layer-PA+PE.
Advantages: Environmental, cost reduction, form-fit, EU certificate, future packaging trend
Size range: 3L~25L
Price: 40% lower than A
Shipping and storage cost: 50%~60% lower than A;

Usually, our flexible containers comes with box, container and cap. But we also sell box and containers separately.

We have 10 years exporting experience. Our workshop is dust-free. We always get good shipping price ( to the destination ports ) for CIF terms

Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12

1.Name: Sodium nitrate
Chemical formula: NaNO3
Formula weght:84.99
2.Property:
(1) ordinary sodium nitrate: white little crystals or light yellow
(2) dry powder sodium nitrate: non-caking, showing loose status.
Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc.

3. Usage:  it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc.

4. Specification: (Technical Standards:GB/T4553-2002)
Item Unit High G. First G. Qualified G. Dry powder G.
Assay % 99.7 99.3 98.5 99.3
Sodium nitrite % 0.01 0.02 0.15 0.02
Chlorides % 0.25 0.30 -- 0.25
Water insolubles % 0.03 0.06 -- 0.03
Moisture % 1.0 1.5 2.00 0.2
Carbonates % 0.05 0.10 -- 0.1
Iron % 0.005 -- -- 0.005
Loose degree -- -- -- 95
5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.

Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves
One-time use, no sterilization, no latex
Single use, non-sterile, Latex free
Model: S, M, L, XL
Sizes: S, M, L, XL
Color: blue, green, black, etc.
Color: Blue, Green, Black etc.
Structure: 5 fingers, with curling, regardless of left and right hands
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface type: smooth surface
Surface: Smooth

Features :
PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and
The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with
PVC paste and Nitrile latex, and the finished product has the advantage of
both PVC and Nitrile glove.
The donning feeling is better than vinyl gloves.
Much softer than vinyl gloves
Sturdy, wearable, longer wearing time than nitrile gloves
The wearing time is longer than nitrile gloves.
Has good wet hand wearability, easier to wear than nitrile and PVC gloves
Easy donning with wet hands and easy donning than nitrile &vinyl gloves.
PU coating, free of protein, effectively reduces the risk of allergies
PU coating, with no protein in it, allergy risk is reduced effectively.
Has better protection, has better acid resistance, alkali resistance and oil resistance
Better protection, good resistance of acid, alkali and oil.
Better cost-performance

per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed.

Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves
Single use, non-sterile, no measuring, Latex free
Sizes: XS, M, L. XL. XXL
Color: Blue, Green
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface: Smooth
The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was
developed based on the vinyl glove production technology. Its material is
compounded with PVC paste and Nitrile latex, so the finished production has
the advantage of both PVC and Nitrile gloves.
Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better
satisfy the users demands, it feels softer, more flexible and more
comfortable when wearing.
Intended purpose: The examination glove is disposable non-sterile device
intended for medical purpose that is worn on the examinerâ??s hand or finger
to prevent contamination between patient and examiner.

Medical Device Quality Management System EN ISO 13485 Certificate,
ISO 9001 Quality Management System Certificate - 2 FDA
FDA Registration Information - 510K
Product 510K
Biocompatibility Test Report
EU CE Certificate (DOC, Technical Documentation Review Report
)