Frito-Lay Lay's Potato Chips.
Available in 4 flavors Nori Seaweed/ Salmon Teriyaki/ Classic Salty/ Spicy Barbecue. Available in 15/40/68 gram pack.
Shelf Life = 8 Months.
Language in Packaging = English, Bahasa Indonesia.
Port of Loading: Semarang, Indonesia.
Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc).
Frito-Lay Chitato Potato Chips.
Available in 4 flavors: Supreme Cheese/ Classic Salty/ Beef Barbecue/ Spicy Chicken.
Available in 15/40/68 gram (+15%) pack.
Shelf Life = 8 Months. Language in Packaging = English, Bahasa Indonesia.
Port of Loading: Semarang, Indonesia.
Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc).
We accomodate LCL and Mixed item FCL
Doritos Tortilla Chips Frito-Lay 160 gram (1 box = 20 pcs). Also available in smaller packs
Available flavors: Barbecue, Nacho Cheese, Roasted Corn.
Shelf Life 9 Months.
Language in Packaging: English, Bahasa Indonesia.
Port of Loading: Semarang, Indonesia
Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc)
Lays Chips with oregano are made from 100% natural and selected potatoes, and flavoured with oregano of rich taste. Enjoy the unique and delicious flavor of oregano in every chip for an unbeatable snacking experience.
Frito-Lays Cheetos 75 grams. 1 box = 30 pcs
Available in 2 flavors: Grilled Chicken, Roasted Corn.
Shelf Life 8 Months. Language in Packaging: English, Bahasa Indonesia. Port of Loading: Semarang, Indonesia Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc)
Calbee Wings Potabee Potato Chips. Available in 5 flavors: Nori Seaweed, Barbecue, Salted Egg, Melted Cheese, Grilled Chicken. Available in 15/35/68 gram (+15%) pack. Shelf Life = 9 Months. Language in Packaging = English, Bahasa Indonesia. Port of Loading: Semarang, Indonesia. Note: We could paste sticker on each pack should there is any additional information needed (importer name, information in other language, etc)
Potabee, a potato chip snack made from real potatoes. Potabee is cut precisely with a technology known as V-cut, which makes it crunchier and tastes better. Potabee also contains spices which make it even more delicious.
Available in 7 variants:
- Roasted Seaweed
- BBQ
- Grilled chicken
- Melted Cheese Steak
- Selection Salted Egg
- Wagyu Beef steak Selections
- Selection Black Truffle
size:
- 15gr x 60 pcs
- 35 gr x 40 pcs
- 68 gr x 30 pcs
- 120 gr x 18 pcs
Potabee, a potato chip snack made from real potatoes. Potabee is cut precisely with a technology known as V-cut, which makes it crunchier and tastes better. Potabee also contains spices which make it even more delicious. Available in 7 variants: - Roasted Seaweed - BBQ - Grilled chicken - Melted Cheese Steak - Selection Salted Egg - Wagyu Beef steak Selections - Selection Black Truffle size: - 15gr x 60 pcs - 35 gr x 40 pcs - 68 gr x 30 pcs - 120 gr x 18 pcs
Hi Everybody!
Have a nice day!
We are HUVY IMPORT EXPORT CO.,LTD is company that specialises in producing and exporting agricaltural products, Fresh Fruits/Vegetables and seafood in Viet Nam. Our products have been exported to many countries in the world such us: Singapore, Korea , China, srilanka, Malaysia, India.
We run the company with the motto: The best quality at the most competive prices With many years of experience that creates the intensive knowledge about the products and market so we are confident that we are able to meet the buyer's demands in the world. Read More [...]
I heard that you are interested in our SEEDLESS LIME , so i'm very happy to send you product specifications that are guaranteed for good quality, competitive price.
* Product detail:
- Product type: SEEDLESS LIME
- Color: Green
- Shelf Life: 40 days
- Manufacturer: HUVY IMPORT EXPORT CO.,LTD
- Content: Seedless lemon is a fruit of the family Rutaceae
- Instruction for use: Cooking or Eat Normal
- Place of Origin: Vietnam
- Product Type: Citrus Fruit
- Storage Type Temp: 5 Degrees Celsius
- Quality: High quality
- Weight(gram): Size S (18-22pcs/kg) Size M (14-17pcs/kg) Size L (08-10pcs/kg)
- MOQ: Cont 20 RF ( 10 tons)
- Packing: Carton, PP
- Size: S M L
*Payment: T/T or L/C
* Delivery:
- Port: any port in Ho Chi Minh
- Time: + Air shipment: within 6 days
+ Sea shipment: within 15 days
Amulya Snack Biscuits, Tangy Tomato flavoured Bites. Very Crispy n Crunchy and tasty Chips. Our Chip Lets available in many flavours like Tangy Tomato, Masala Masti and Chilli Chataka flavours.
Packing : Each Pouch pack weighs 15 grams , such 300 packs arranged in a poly bag. and the loadability in 40 HC is 1900 polybags.
Vikafoods is specializes in supplying Fresh Fruit, Frozen Fruit, Dried Foods, Green Tea, Instant Noodle of all kinds domestically and exported. Especially the premium types for customers with hardly demand and bustling markets.
Carrots can be eaten in a variety of ways. Only 3 percent of the ?carotene in raw carrots is released during digestion: this can be improved to 39% by pulping, cooking and adding cooking oil. Carrots are pured and used as baby food, dehydrated to make chips, flakes, and powder, and thinly sliced and deep-fried, like potato chips. The sweetness of carrots allows the vegetable to be used in some fruit-like roles. Carrot juice is also widely marketed, especially as a health drink, either stand-alone or blended with juices extracted from fruits and other vegetables. Highly excessive consumption over a period of time can result in carotenemia, a yellow-orange discoloration of the skin caused by a build up of carotenoids.
Standard: Specification:
Product IQF Frozen Carrot
Styles Frozen
Origin Vietnam
Type Carrot
Color Natural Orange
Grade AAA
Shape Diced, Striped, Sliced
Size Dices:10mm*10mm,5mm*5mm,15mm*15mm
Strips:3mm*3mm*5cm, 6mm*6mm*5cm
Slices:6-8mm, 8-10mm
(Or as Customer�¢??s Request)
Standard Exporting
Certification ISO
Packing Bulk, Vacuum Pack, Retail Pack
0.5 - 1kg/PE/rider*10kg/carton
5kg/PE/Carton
(Or as Customer�¢??s Request)
Shelf Life 24 months
MOQ 1x40 feet
Delivery term 15 - 22 days
Supply Ability 200 Ton/month
Do you have any questions or a special request? Please contact with us. We will advise you and make you an attractive offer. You'll be amazed at all the things we can make possible for you. We look forward to hearing from you!
Sincerely,
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
Wholesale 1KG 2KG 10KG Custom Printed French Fries Center Sealed Frozen Food
Commodity Name
IQF frozen potato french fries, potato cube , potato cut
Size
Cubes: 8*8mm, 9*9mm, 10*10mm or cut according to customers' requirements
Chip: 7.5*7.5mm (natural length), 10*10mm (natural length) or cut according to customers' requirements
Cut: 8-12g, 20-25g or cut according to customers' requirement
Standard
A grade
Supplying period
all you around
Certification
HACCP/BRC/HALAL. etc.
Packing
inner packing: 400g/2.5kg/10kg or as your requirement
outer packing:10kg/carton
Shelf Life
24months in -18â?? storage
Delivery time
15 days after deposit or confirmation of the order
Loading
18-25 tons per 40 feet container according to different packages; 10-12tons per 20 feet container
MOQ
Any quantity can be mixed with other products
Exported Market
UK, Japan, Europe etc.
Description
1)Clean and sorted from very fresh raw materials without residue, damaged or rotten ones;
2)Processed in the experienced factories;
3)Supervised by our QC team;
4)If all the processing procedure goes well without any problem then pack the products accordingly
5)To keep it stored in -18 centigrade degree
