High switching performance with minimal energy consumption
High sensitivity, low power consumption, easy to install.
Small size, light weight
High vibration and shock resistance.
The contact terminal can be modified as per customer specification.
Oem/odm acceptable.
Miniature size
Used for Energy Meter/Electricity Meter/Smart Meter and so on.
Simple structure, low cost, high stability.
Accept customization. Manufacture by your drawing or specification.
OEM Service Offered, Design Service Offered, Buyer Label Offered
Product range dw(adw1) series
Contact configuration spst-no
Coil voltage 12vdc
Contact current 8a
Relay mounting through hole
Coil type latching single coil
Contact voltage vac 250v
Relay type power - general purpose
Relay terminals solder
Contact voltage vdc 30v
Contact material silver tin oxide
Coil resistance 720ohm
Approvals & standards ul, vde
Svhc to be advised
Search:
Manufacturer:Panasonic
Product category:Low signal relays - pcb
Rohs:Rohs compliant by exemption
Brand:Panasonic industrial devices
Product:Slim form relays
Contact form:Dpdt (2 form c)
Contact current rating:1 a
Coil voltage:12 v
Maximum switching current:1 a
Coil current:11.7 ma
Coil type:Non-latching
Power consumption:140 mw
Contact rating:1 a at 30 vdc / 300 ma at 125 vac
Contact termination:Solder pin
Mounting style:Through hole
Packaging:Tube
Factory pack quantity:50
Search:
5909 Latching Relay Suppliers
Short on time? Let Latching Relay sellers contact you.
25A contact switching capability.
Contact Form: 1B/1C optional
Only impulse excitation needed, Single coil and dual coil optional.
Low power consumption, strong load capability.
Small in size, PCB type installation.
4KV dielectric strength between coil and contacts.
RoHS compliant.
Outline dimensions: (38.8 x 28.7 x 15) mm.
VDE certificate No.: 40039308.
120A three sets of contacts switching capability.
Only impulse excitation needed, single coil and dual coil optional.
Low power consumption, small in size.
This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable (Flexwire) or custom relay terminals.
4KV dielectric strength between coil and contacts.
RoHS compliant.
IEC62055-31 UC3 compliant.
Outline dimensions: (103 x 46.5 x 41.7) mm.
80A contact switching capability
Only impulse excitation needed, Single or Dual Coil Optional
Strong load capacity, 80A/250VAC switchable
Low power consumption, small in size
This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable or custom relay terminals
4KV dielectric strength between coil and contacts
RoHS compliant
Outline dimensions: (36.6 x 30 x 17.8) mm
VDE Certificate No.: 40027144
16A contact switching capability
Only impulse excitation needed, both for single and double coil.
4KV dielectric strength between coil and contacts.
Mounting: PCB THT
RoHS compliant.
Outline dimensions: (29 x 13 x 17) mm.
VDE Certificate No.: 40030447.
UL Certificate No.: E340054.
120A contact switching capability
Only impulse excitation needed, Single Coil and Dual Coil optional.
Low power consumption, small in size.
This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable or custom relay terminals.
4KV dielectric strength between coil and contacts.
RoHS compliant.
IEC62055-31 UC3 compliant.
Outline dimensions: (42 x 32 x 20.8) mm.
-Three phase 100A switching capability ;
-Multi layer blades, lower temperature rise ;
-Conform to fault making capacity and short circuit current;
-carrying capacity of requirement of IEC62066-31( UC3) and IEC61810-1.
-It can be applied in three phase 100A electricity meter.
-Single phase 80A switching capability ;
-Multi layer blades, low temperature rise ;
-Environment protection ( Comply with ROHS)
-It can be applied in single phase or three phase 60A Electricity meters.
