The CINCINNATI lasermech laser nozzles can assist the gas to eject rapidly, which can effectively prevent the debris from falling upward and thus protect the focusing mirror. At the same time, it controls the diffusion area and size of the gas, thus affecting the cutting quality of the laser cutting machine.
Single nozzle is used for melting cutting, that is, nitrogen is used as auxiliary gas to cut stainless steel and aluminum plate.
Double nozzles are commonly used for cutting oxygen, which uses oxygen as an auxiliary gas for cutting carbon steel.
Advantage:
1. Made of high quality copper material, can provide stable signal transmission.
2. High processing precision, high light inside the stack surface, airflow barrier through, less slag, no burrs, cutting easily.
3. The strict oxidation prevention process, copper bright, smooth surface, can effectively prolong the use of time.
4. Suitable for market mainstream brands Amada.
At the same time, the choice of the nozzle aperture size will vary according to the thickness of the cutting material.
1.Cutting thin plate (3mm below): choose diameter 1mm aperture nozzle, cutting effect will be relatively fine, and choose diameter 1.5mm aperture of nozzle will be thicker, and the corner of the place will be easier to stain.
2.Cutting plate (above 3mm): choose to use 1mm when the diameter of the nozzle aperture is not stable, because the cutting power is higher, the relative cooling time is longer, the relative cutting time increases, with 1mm aperture diameter nozzle gas diffusion area is small, so it is not too stable, but basically can still be used. The nozzle with a diameter of 1.5mm diameter has a large gas diffusion area and a slower gas flow rate, so it is stable when cutting.
3.Cutting more than 10mm of the plate. At present, 2mm or 2mm diameter nozzle is usually chosen.
Note: Some 1.0/1.2/1.5/1.8/2.0/2.5/3.0mm aperture size, please select need output aperture.
- Ceramic Laser nozzle holderWe manufacture customer specific ceramic components for laser equipment. We offer you high standard quality ceramic laser nozzle holders Which allow you always ensure the perfect distance between the sheet and the nozzle.High quality raw materials for correct distance regulation and constant focal position.Long service life due to the precision assembling for the ceramic and thread insert.
- Ceramic Laser nozzle holderWe manufacture customer specific ceramic components for laser equipment. We offer you high standard quality ceramic laser nozzle holders Which allow you always ensure the perfect distance between the sheet and the nozzle.High quality raw materials for correct distance regulation and constant focal position.Long service life due to the precision assembling for the ceramic and thread insert.
- Ceramic Laser nozzle holderWe manufacture customer specific ceramic components for laser equipment. We offer you high standard quality ceramic laser nozzle holders Which allow you always ensure the perfect distance between the sheet and the nozzle.High quality raw materials for correct distance regulation and constant focal position.Long service life due to the precision assembling for the ceramic and thread insert.
17926 Laser Nozzle Suppliers
Short on time? Let Laser Nozzle sellers contact you.
The Precitec laser cutting copper nozzle can assist the gas to eject rapidly, which can effectively prevent the debris from falling upward and thus protect the focusing mirror. At the same time, it controls the diffusion area and size of the gas, thus affecting the cutting quality of the laser cutting machine.
Single nozzle is used for melting cutting, that is, nitrogen is used as auxiliary gas to cut stainless steel and aluminum plate.
Double nozzles are commonly used for cutting oxygen, which uses oxygen as an auxiliary gas for cutting carbon steel.
Advantage:
Advantage:
1. Made of high quality copper material, can provide stable signal transmission.
2. High processing precision, high light inside the stack surface, airflow barrier through, less slag, no burrs, cutting easily.
3. The strict oxidation prevention process, copper bright, smooth surface, can effectively prolong the use of time.
4. Suitable for market mainstream brands, such as PRECITEC, Han, laser, Wan Shunxing, Jin Yun, Dican, Hong Shan, Jia Qiang, Chutian, thunder, high energy and other fiber laser cutting head.
At the same time, the choice of the nozzle aperture size will vary according to the thickness of the cutting material.
1.Cutting thin plate (3mm below): choose diameter 1mm aperture nozzle, cutting effect will be relatively fine, and choose diameter 1.5mm aperture of nozzle will be thicker, and the corner of the place will be easier to stain.
2.Cutting plate (above 3mm): choose to use 1mm when the diameter of the nozzle aperture is not stable, because the cutting power is higher, the relative cooling time is longer, the relative cutting time increases, with 1mm aperture diameter nozzle gas diffusion area is small, so it is not too stable, but basically can still be used. The nozzle with a diameter of 1.5mm diameter has a large gas diffusion area and a slower gas flow rate, so it is stable when cutting.
3.Cutting more than 10mm of the plate. At present, 2mm or 2mm diameter nozzle is usually chosen.
Note: Some 0.8/1.0/1.2/1.4/1.5/1.8/2.0/2.5/3.0/4.0 aperture size, please select need output aperture.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
Aroma Machinery Limited supply waterjet abrasive nozzle,carbide nozzle , orifice , which used the import material from Gemerny at very competitive price
We now have a lot of original new and used JUKI nozzles In stock for SMT JUKI 700/2000 series machines. They are 101,102,103,104,105,106,201,202,203,204 for 700 series mahcine ,500,501,502,503,504,505,506,507,508,509,510 and 511 for 2000 series mahcine and some special heterotype nozzles with some special functions. And we also have a large number of JUKI/YAMAHA spare parts in stock, such as feeder, laser, motor and servo card, PCB, cable bearer, LM guide,etc. Welcome to contact us at any time.
E35017210A0 NOZZLE ASM 101
E35027210A0 NOZZLE ASM 102
E35037210A0 NOZZLE ASM 103
E35047210A0 NOZZLE ASM 104
E35057210A0 NOZZLE ASM 105
E35067210A0 NOZZLE ASM 106
E3571721000 NOZZLE 201
E3572721000 NOZZLE 201
E3573721000 NOZZLE 201
E3574721000 NOZZLE 201
40001339 NOZZLE ASSEMBLY 501
40001340 NOZZLE ASSEMBLY 502
40001341 NOZZLE ASSEMBLY 503
40001342 NOZZLE ASSEMBLY 504
40001343 NOZZLE ASSEMBLY 505
40001344 NOZZLE ASSEMBLY 506
40001345 NOZZLE ASSEMBLY 507
40001799 NOZZLE ASSEMBLY 508
40011046 NOZZLE ASSEMBLY 500
40010999 NOZZLE ASSEMBLY 500
40010995 NOZZLE ASSEMBLY 502
40010996 NOZZLE ASSEMBLY 503
40010997 NOZZLE ASSEMBLY 504
40010998 NOZZLE ASSEMBLY 505
40025165 NOZZLE ASSEMBLY 509
E36157290A0 NOZZLE ASSEMBLY 510
E36167290A0 NOZZLE ASSEMBLY 511
E3600-729-0a0 juki nozzle 501 assy
Part no. Part name size(mm) remarks
E3608-729-0a0 #500 ass y(2-holes) 0.5/1.0 e3600-729-0a0 #501 ass y 0.7/0.2
E3601-729-0a0 #502 ass y 0.7/0.4 e3602-729-0a0 #503 ass y 1.0/0.6
E3603-729-0a0 #504 ass y 1.5/0.9 e3604-729-0a0 #505 ass y 3.5/1.7 pad type
E3605-729-0a0 #506 ass y 5.0/3.2 pad type e3606-729-0a0 #507 ass y 8.5/5.0 pad type
E3607-729-0a0 #508 ass y 9.5/8.0 pad type e365x-729-000 #500 tip(2-holes) 0.5/1.0(0.3)
E3651-729-000 #501 tip 0.7/0.2 e3654-729-000 #502 tip 0.7/0.4
E3655-729-000 #503 tip 1.0/0.6 e3656-729-000 #504 tip 1.5/0.9
E3658-729-000 #505 tip 3.5/1.7 pad type e3660-729-000 #506 tip 5.0/3.2 pad type
E3661-729-000 #507 tip 8.5/5.0 pad type e3662-729-000 #508 tip 9.5/8.0 pad type
Chuck nozzle chip size large chuck nozzle chip size small
Special cnt datd for on
17926 Laser Nozzle Suppliers
Short on time? Let Laser Nozzle sellers contact you.
